• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1491-1492
• /
• 2011

In this study, we investigated about the effect of hole transport layer materials(${\alpha}$-NPD, TPD) depending on the electrical properties of organic light emitting diode. In deposition method, we used thermal evaporation and it was a method for performing thin film by attaching vaporizing a molecule to substrate in a high thermal and vaccum. We analyzed luminance, current density, external quantum efficiency and current efficiency in 40 [nm] as optimization thickness of ${\alpha}$-NPD and TPD. In result of experiment, maximum luminance of TPD had 1.1 times higher than ${\alpha}$-NPD, but ${\alpha}$-NPD had luminance, external quantum efficiency, and current efficiency higher than TPD in low operating voltage. Actually, ${\alpha}$-NPD had efficiency higher than TPD in low operating voltage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.1 s.29
• /
• pp.43-47
• /
• 1989

The microstructural changes of nylon 6 UDY, POY and FDY were compared after free-annealing through crystallinity, birefringence, and melting behavior analyses. Free-annealing was done at various temperatures $(120^{\circ}C\;,140^{\circ}C,\;160^{\circ}C,\;180^{\circ}C,\;200^{\circ}C)$ and times (15 min., 30 min., 60 min.) using vaccum oven. Crystallinity was measured by the density gradient column technique and birefringence was measured using a Nikon polarizing microscope with a quartz wedge and Senarmont compensator. Melting behavior was investigated on the basis of DSC melting corves. Crystallinites of specimens increased as the treatment temperature and time increased. Birefringence of UDY increased after annealing and increased as the treatment temperature increased. On the other hand, those of POY and FDY decreased after annealing. Especially, the changes of crystallinity and birefringence of treated POY were particularly lower than those of treated UDY and FDY. Melting peaks of untreated UDY, POY and FDY were different in the position and the shape, but little change was seen in melting peaks in spite of increasing the annealing temperature and time. UDY and FDY showed single melting peaks in all the specimens. But POY showed double melting peaks, which means the coexistences of crystals with different thermal properties.

• Korean Parent-Child Health Journal
• /
• v.3 no.2
• /
• pp.67-80
• /
• 2000

This study was described as midwife's role and obstacle of midwife's role expansion. Midwife as primary medical personal who practices for a mother and infant health care and promotion of mother infant interaction. As the trend of increasing natural childbirth, midwifery has to provide childbearing care those who want delivery in a midwifery center. This study conducted to survey for 44 midwives who work at the midwifery center. The results of the study as fellows. 1. Most of the midwives role was care of pregnancy, delivery, postpartum women and babies. Another role was conducted educational classes childbirth, breast feeding, contraception and sexual education. 2. Some midwives role perform breech, vaccum delivery, episiotomy and suture, pitocin induction and augmentation, ultrasonogram, giving medication, anesthesia, collecting specimen from Pap smear and vaginal discharge. Midwife perform these roles without medical law support. 3. Most of the obstacles of the midwife role was the medical law limitation. Midwives want revise medical law to perform simple treatment for childbearing women and babies. 4. Half of the midwives refer cases to medical doctor in case of complication of women and newborns. 5. Current frequency of home birth rate is slightly higher than before and me cases like to have delivery under water. Finally, midwife and midwifery have to prepare to meet childbearing woman, baby and family's need. For activation and expansion of midwife's role, every midwife has to be aware of medical law accurately and they must know what practice they can do and what practice they can not do.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.439-442
• /
• 1989

$CO_2$ lasers are used in the various industrial fields since the development of $CO_2$ laser in 1964 It is because $CO_2$ laser is more efficient, more powerful than other lasers and $CO_2$ laser light of wavelength $10.6{\mu}m$ interacts with materials well. Thus $CO_2$ laser is used for industrial application such as cutting, punching, welding, surface treatment of metal and nonmetalic materials, isotope separation, etc. Already other research institutes including some universities have recognized the advantages and importance of the $CO_2$ laser, and studied it. However, its technology is in elementary state yet Therefore,we started this study to develop present $CO_2$ laser technology more highly and to fit it. The main purposes of this study are to acquire various technologies such as high voltage, high pressure glow discharge, vaccum and optical cavity design.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.60-60
• /
• 2010

1-D nanostructured materials have much more attention because of their outstanding properties and wide applicability in device fabrication. Bismuth oxide($Bi_2O_3$) is an important p-type semiconductor with main crystallographic polymorphs denoted by $\alpha-$, $\beta-$, $\gamma-$, and $\delta-Bi_2O_3$[1]. Due to its unique optical and electrical properties, $Bi_2O_3$ has been extensively investigated for various applications in gas sensors, photovoltaic cells, fuel cells, supercapacitors[2-4]. In this study, $Bi_2O_3$ NWs were grown by two step annealing process: in the first step, after annealing at $270^{\circ}C$ for 10h in a vaccum($3{\times}10^{-6}$ torr), we can obtain the bismuth nanowires. In the second step, after annealing at $300^{\circ}C$ for 2h in $O_2$ ambient, we successfully fabicated $Bi_2O_3$nanowires.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.1-6
• /
• 2006

The white organic light emitting diode(OLED) with two-wavelength was fabricated using the DPVBi of blue emitting material and a series of orange colar fluorescent dye(Rubrene) by vaccum evaporation processes. The basic structure of OLED was ITO/TPD$(225{\AA})$/DPVBi/Rubrene/BCP$(210{\AA})/Alq_3(225{\AA})/Al(1000{\AA})$. We analyzed the fabricated device through the changes of the DPVBi and Rubrene layer's thickness. We obtained the white OLED with the CIE coordinate of the device was (0.29, 0.33) and luminescence of $1000cd/m^2$ at applied voltage of 15V when 4he thickness of DPVBi layer was 210${\AA}$ and the thickness of Rubrene layer was 180${\AA}$.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.31-36
• /
• 1984

Various efforts have been dedicated to obtain the negative impedances in microwave frequencies with semiconductor devices by many scientists for f: some passed decades, and as a result, many solid state microwave devices have been developed. But they all have much less maximum power ratings with respect to the vaccum tubes. In this paper, a MOSFET is proposed and studied, which have a periodic structure of multigates on the semiconductor via insulator. The hish electric field in the channel induces a voltage distribution on the gates by electrostatic coupling, and the polarization so induced between the gates is able to give a space modulation of the velocity of carriers or the current density in the channel, and as a natural consequence, a microwave amplifier with higher power ratings can be expected.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.3
• /
• pp.243-255
• /
• 1990

The objective of this study is to present an efficient measurement method of the effective thermal diffusivity for the fibrous insulation material. The non-linear parameter estimation (NPE) method is adapted for this analysis because of its accuracy and its results are compared with those by other direct methods such as CTP, CHP and STD method. A experimental system is constructed with bell-jar vaccum chamber, diffusion pump, tube type furnace, control unit and data acquisition system included with A/D converter and IBM XT/AT personal computer. The typical results obtained from this study are as follows; 1) NPE method can be recommended as an useful and accurate method to measure the effective thermal diffusivity of insuation material because it is shown that the measurement error compared with those by other direct methods is reduced for standard material, NBS-1450b. 2) NPE method can minimize the effects of ill-measured temperature due to external disturbance, because the final value is found by point to point estimating. 3) NPE method dose not depend on the kinds of heat flux, since the surfac temperature are used to estimate the thermal diffusivity. 4) With NPE method, compared with the steady state method, a measuring time and a sample size could be reduced.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.114-119
• /
• 2004

An oxyge generator, which is applied to a particular space such as automobile, must consider compactness and lightweight as well as problems caused by noise, vibration and heat dissipation. For these matters, a BLDC motor was adopted to reduce heat while a bed using synthetic zeolite NaX made it possible to generate high-density oxygen with relatively small size. Moreover, owing to the characteristic of synthetic zeolite Nax, a two-head vacuum pump was designed to desorb nitrogen without additional pump unit.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.97-100
• /
• 2001

This paper presents the characteristics of Ta-N thin-film strain gauges as high-temperature strain gauges, which were deposited on Si substrate by DC reactive magnetron sputtering in an argon-nitrogen atmosphere(Ar-(4~16%)$N_2$). These films were annealed for 1 hour in $2{\times}10^{-6}$ Torr vaccum furnace range $500\sim1000^{\circ}C$. The optimized conditions of Ta-N thin-film strain gauges were annealing condition($900^{\circ}C$, 1 hr.) in 8% $N_2$ gas flow ratio deposition atmosphere. Under optimum conditions, the Ta-N thin-films for strain gauges is obtained a high resistivity, $\rho=768.93$ ${\mu}{\Omega}cm$, a low temperature coefficient of resistance, TCR=-84 ppm/$^{\circ}C$ and a high temporal stability with a good longitudinal gauge factor, GF=4.12.