• Journal of Korean Dental Science
• /
• v.7 no.1
• /
• pp.6-15
• /
• 2014

Purpose: The purpose of this retrospective study is to investigate the degree of coincidence between the peer assessment rating (PAR) index and American Board of Orthodontics objective grading system (ABO-OGS) in the assessment of orthodontic treatment outcomes of Class I malocclusion cases. Materials and Methods: The sample consisted of 26 Class I patients. The PAR index was used for evaluation of pre-(T0) and posttreatment (T1) casts, and the ABO-OGS for assessment of T1 casts. If there was a reduction in PAR scores from T0 to T1 of more than 30%, the label 'PAR+' was given to the case, and if not, it was labeled 'PAR-'. If the ABO-OGS was less than 27, the label 'OGS+' was given to the case and if not, it was labeled 'OGS-'. 'A PAR-only qualified group' (PAR+), 'ABO-OGS-only qualified group' (OGS+), 'both indices qualified group' (PAR+/OGS+), and 'both indices disqualified group' (PAR-/OGS-) were compared with a Wilcoxon rank-sum test, sensitivity/specifi city test and Spearman's correlation test. Result: PAR scores for T0, T1, and percentage reduction were 21.1, 6.4, and 65.9%, respectively, and 35.4 for ABOOGS. The distribution of the 'PAR+/OGS+', 'PAR+', and 'PAR-/OGS-' group was 19.3%, 76.9%, and 3.8%, respectively. The T0-PAR, T1-PAR and PAR point reductions for the 'PAR+' group were significantly higher than those of 'PAR+/OGS+' groups (23.1 vs. 15.6; 6.7 vs. 4.6; and 16.5 vs. 11.0; all P<0.05). However, the PAR-percentage reduction and treatment duration between the two groups were not statistically different (70.0% vs. 67.0%, P=0.4325; 24.1 months vs. 25.0 months, P=0.4057). The T1-ABO-OGS score for 'PAR+' group was significantly higher than that of the 'PAR+/OGS+' groups (38.2 vs. 24.0, P<0.001). Conclusion: Since the fraction of the 'PAR+/OGS+' group was less than 20% and there was no significant correlation between PAR-percentage reduction and T1-ABO-OGS, development of a new index system for the accurate evaluation of treatment outcome is needed.

• Korean Journal of Radiology
• /
• v.21 no.10
• /
• pp.1165-1177
• /
• 2020

Objective: To assess the feasibility of applying a deep learning-based denoising technique to coronary CT angiography (CCTA) along with iterative reconstruction for additional noise reduction. Materials and Methods: We retrospectively enrolled 82 consecutive patients (male:female = 60:22; mean age, 67.0 ± 10.8 years) who had undergone both CCTA and invasive coronary artery angiography from March 2017 to June 2018. All included patients underwent CCTA with iterative reconstruction (ADMIRE level 3, Siemens Healthineers). We developed a deep learning based denoising technique (ClariCT.AI, ClariPI), which was based on a modified U-net type convolutional neural net model designed to predict the possible occurrence of low-dose noise in the originals. Denoised images were obtained by subtracting the predicted noise from the originals. Image noise, CT attenuation, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) were objectively calculated. The edge rise distance (ERD) was measured as an indicator of image sharpness. Two blinded readers subjectively graded the image quality using a 5-point scale. Diagnostic performance of the CCTA was evaluated based on the presence or absence of significant stenosis (≥ 50% lumen reduction). Results: Objective image qualities (original vs. denoised: image noise, 67.22 ± 25.74 vs. 52.64 ± 27.40; SNR [left main], 21.91 ± 6.38 vs. 30.35 ± 10.46; CNR [left main], 23.24 ± 6.52 vs. 31.93 ± 10.72; all p < 0.001) and subjective image quality (2.45 ± 0.62 vs. 3.65 ± 0.60, p < 0.001) improved significantly in the denoised images. The average ERDs of the denoised images were significantly smaller than those of originals (0.98 ± 0.08 vs. 0.09 ± 0.08, p < 0.001). With regard to diagnostic accuracy, no significant differences were observed among paired comparisons. Conclusion: Application of the deep learning technique along with iterative reconstruction can enhance the noise reduction performance with a significant improvement in objective and subjective image qualities of CCTA images.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.3
• /
• pp.241-244
• /
• 1991

An experiment was conducted to investigate the nutritional and economic effects of complete replacement of maize with sun-dried cassava (SDC) in the diet of broiler chickens raised from one day of age to seven weeks. The complete replacement of maize by SDC resulted in a 10 percent reduction (p<0.05) in final bodyweights (1.91 vs 1.72 kg); and a 5 percent reduction (p>0.05) in average feed intake (4.01 vs 3.81 kg). Feed efficiency was not affected (p > 0.05). Cost per kilogramme of feed was reduced by nearly 30 percent and cost per kilogramme of bodyweight gain lowered by about 26 percent by using SDC diet. Relative profit return after accounting for cost of feed and cost of day old chick was higher by 11 percent on the SDC diet. It was concluded that despite the reduction in final bodyweight, the attractive economic return obtained from using SDC, a locally produced ingredient, may be justified in place of maize which is imported.

• Journal of the Korean Geophysical Society
• /
• v.6 no.4
• /
• pp.245-259
• /
• 2003

Two multichannel analysis of surface wave (MASW) surveys were conducted over a soil site in Tacoma Water's Green River Facility, Washington, where construction of a chemical treatment facility had been planned. The purpose of the surveys was to compare soil stiffness characterized by shear-velocity (Vs) distribution before and after Deep Dynamic Compaction (DDC) operation that was designed to improve the soil stiffness. Site soil consisted of very heterogeneous gravel and cobbles in a sand-and-silt matrix. Results from each survey are represented by two 2-D Vs maps delineating Vs variation of soil below the surveyed lines. One map was constructed from those dispersion curves that were analyzed with a significant amount of subjective judgment involved, whereas the other map was constructed from those dispersion curves analyzed with as much objective information as possible. Comparison of 2-D Vs maps indicates that Vs actually decreased after the DDC operations, possibly due to the loss (or reduction) of cohesive bonding between soil particles caused by the compaction operations.

• Journal of Environmental Science International
• /
• v.5 no.5
• /
• pp.677-682
• /
• 1996

The electrochemical carbon dioxide reduction to produce acetaldehyde, methanol and ethanol is investigated by using perovskite type electrode ($La_{0.9}$$Sr_{0.1}$$CuO_3$). The experiments were Performed under 100 mA/cm2 and -2 to -2.5 V vs. Ag/AgCl. The highest faradaic efficiencies for methanol, ethanol, acetaldehyde were 11.6, 15.3, and 6.2%, respectively. The experimental data demonstrated that the capability of the perovskite type oxide for the electrode of electrochemical carbon dioxide reduction to produce alcohols was superior to other metal electrode. Key words : Perovskite, Electrode, Alcohol Formation, Electrochemical Reduction, Carbon Dioxide Fixation.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.4
• /
• pp.214-218
• /
• 2011

The electrochemical characteristics and performance of redox flow battery using the soluble lead has been evaluated. Cyclic voltammetry was performed on the materials to evaluate deposition and dissolution of lead and lead dioxide. In the negative region, a reduction peak is not observed, and on the reverse scan, on-set voltage is observed at -0.47 V(vs SCE). In the positive region, the distinct peak is observed on the forward and reverse scan. The charge/discharge experiments were carried out graphite electrode in the beaker cell. The charging(deposition) of lead occurs at around 0.5 V(vs SCE) and discharging(dissolution) of lead occur at around 0.25 V(vs SCE). The potential difference is about 0.25 V. The charging(deposition) of dioxide lead is at 1.77 V(vs SCE) and discharging(dissolution) is at around 0.95 V(vs SCE) during first cycle. On subsequent cycles, the charging of dioxide lead starts at below 1.5 V(vs SCE), after a period the voltage increase to 1.7 V(vs SCE). The voltage of discharging is stable at around 1.0 V(vs SCE).

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.374-378
• /
• 1991

The electrochemical reduction behavior of Bilirubin (BR) in phosphate buffer (pH 7.8) solution was studied by DC polarography, differential pulse polarography, cyclic voltammetry and controlled potential coulometry. In DC polarogram, two reduction waves of BR were found. The half wave potentials of two reduction waves were -1.32 and -1.51 volts vs. Ag/AaCl respectively. The current type of 1st reduction wave was diffusion-controlled and the 2$^{nd}$ reduction wave was diffusion current containing a little kinetic current. The electrochemical reduction process of BR at each reduction step was all irreversible. The prewave appeared at lower concentration than 3.4 ${\times}$ 10$^{-4}$M, this prewave was identified as adsorption prewave. And the number of electron transfered in reduction steps, n$_{app}$ was two for the 1st reduction step and one for the 2$^{nd}$ reduction step.

• Journal of Korean Medicine for Obesity Research
• /
• v.2 no.1
• /
• pp.13-23
• /
• 2002

Background & Methods: In order to study the effect of electro-lipolysis-acupuncture, 57 outpatients who have had herbal medication in Kirin Oriental Hospital were devided to two groups; acupuncture-treated group(46) vs non-acupuncture-treated group(11) Acupuncture-treated group was given electro-lipolysis-acupuncture at least two times a week and administered with herbal diet medication, whereas non-acupuncture-treated group was administered only with herbal diet medication. Results: Mean age, body weight and BMI of these two group at the start point of the treatment were $27.22({\pm}7.64)\;vs \;29.09({\pm}8.73),\;67.76({\pm}9.34)\;vs\;67.00({\pm}10.69),\;and\;26.20({\pm}3.02)\;vs\;26.14({\pm}4.10)$ in the order of acupuncture-treated and non-acupuncture groups. After one month of treatment, change rate of body weight, BMI, total fat, percentage of fat was significantly higher in acupuncture-treated group. Also the change rate of arm circumference, hip circumference and thigh circumference was significantly higher in acupuncture-treated group. The change rate of abdominal circumference and WHR of acupuncture-treated group was higher than that of non-acupuncture-treated group with no statistical significance. The circumference reduction rate according to herbal dieting program was higher in this order, abdomen, arms, chest, thighs and hips. On the other hand, chest circumference change rate over weight loss rate, which is the portion no acupuncture treatment was given to, and AMC change rate was higher in non-acupuncture-treated group. Conclusion: These results imply that herbal dieting program combined with electro-lipolysis-acupuncture is more effective on reducing body fat, size reduction of localized obesity and preservation of muscle than herbal prescription only dieting program.

• Hip & pelvis
• /
• v.35 no.3
• /
• pp.193-199
• /
• 2023

Purpose: Cephalomedullary (CM) nailing is widely performed in treatment of elderly patients with femoral intertrochanteric fractures. However, in cases of fixation failure, re-operation is usually necessary, thus determining factors that may contribute to fixation failure is important. In this study, we examined factors affecting the occurrence of fixation failure, such as age or fracture stability, after CM nailing in elderly patients. Materials and Methods: This study was conducted retrospectively using registered data. From April 2011 to December 2018, CM nailing was performed in 378 cases diagnosed with femoral intertrochanteric fractures, and 201 cases were finally registered. Cases involving patients who were bed-ridden before injury, who died from causes unrelated to surgery, and those with a follow-up period less than six months were excluded. Results: Fixation failure occurred in eight cases. Comparison of the surgical success and fixation failure group showed that the mean age was significantly higher in the fixation failure group compared with the control group (81.3±6.4 vs. 86.4±6.8; P=0.034). A significantly high proportion of unstable fractures was also observed (139/54 vs. 3/5; P=0.040), with a significantly high ratio of intramedullary reduction (176/17 vs. 5/3; P=0.034). A significantly higher ratio of unstable fractures compared with that of stable fractures was observed in the intramedullary reduction group (132/49 vs. 10/10; P=0.033). Conclusion: Fixation failure of CM nailing is likely to occur in patients who are elderly or have unstable fracture patterns. Thus, care should be taken in order to avoid intramedullary reduction.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.3
• /
• pp.165-169
• /
• 2008

The effect of reduction of carbon dioxide by CODH(Carbon Monoxide Dehydrogenase) was compared on glassy carbon and gold working electrodes. In case of gold electrode, the choice of the optimum applied potential is very important since $H_2$ evolution can be mixed with $CO_2$ reduction. On the other hand, efficient $CO_2$ reduction was observed up to -650 mV vs. NHE on glassy carbon in neutral solution due to the larger overpotential for $H_2$ evolution on glassy carbon surface than that on gold surface. The optimum potential for $CO_2$ reduction was found to be $-570{\sim}600\;mV$ vs. NHE. The current efficiency of $CO_2$ to CO decreased dramatically at more negative potential according to the activity of enzyme decrease and the hydrogen evolution.