• Journal of Internet Computing and Services
• /
• v.8 no.4
• /
• pp.51-59
• /
• 2007

This paper presents the development of RFID educational system based on using 900MHz air interface between the reader and the active tag. The software of reader and the active tag is developed on embedded environment, and the software of PC controlling the reader is based on window OS operated as the server. The AT89C51ED2 VLSI chip is used for the processor of the reader and the active tag. As the development environment, Keil compiler is used for the reader and the active tag of which the programing language is C. The visual C language of the visual studio on the PC activated as the server is used for development language. To verify the function of the system, PC gets the tag's identification number through the reader and send the data to with the active tag memory a certain contents as "wite" operation. Finally the data written from the active tag's memory is sent to the PC via the reader as "read" operation and compare the received data with one already sent to the tag.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.175-182
• /
• 2011

In this paper, we implemented a high-performence memory controller which can accommodate processing blocks(multiple masters) in SoC for video signal processing. The memory controller is arbitrated by the internal arbiter which receives request signals from masters and sends grant and data signals to masters. The designed memory controller consists of Master Selector, Mster Arbiter, Memory Signal Generator, Command Decoder, and memory Signal Generator. It was designed using VHDL, and verified using the memory model of SAMSING Inc. For FPGA synthesis and verification, Quartus II of ATERA Inc. was used. The target device is Cyclone II. For simulation, ModelSim of Cadence Inc was used. Since the designed H/W can be stably operated in 174.28MHz, it satisfies the specification of SDRAM technology.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.90-98
• /
• 2013

The stereo system based on local matching is very popular due to its algorithmic simplicity, however it is limited to apply to various applications because it shows poor quality with low matching rates. In this paper, we propose and design a realtime stereo system based on an adaptive support-weight and the system shows low error rates and realtime performance. Generally, in the adaptive support-weight algorithm the intermediate computing results can not be reused to reduce the number of computations. In this research we modify the scheduling to reuse the intermediate results for the better performance by processing rows and columns separately. The nonlinear functions such as exponential or arc tangent have been designed with piecewise linear and step functions by empirical simulations and error analysis. The proposed architecture is composed of 9 processing elements for realtime performance. The proposed stereo system has been designed and synthesized using Donbu Hitek 0.18um standard cell library and can run up to 350Mhz operation frequency (33 frames per second) with 424K gates.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.1
• /
• pp.36-44
• /
• 2003

This paper proposes a Viterbi decoding scheme without trace-back operations to reduce the amount of memory storing the survivor path information, and to increase the decoding speed. The proposed decoding scheme is a modified register exchange scheme, and is verified by a simulation to give the same results as those of the conventional decoders. It is compared with the conventional decoding schemes such as the trace-back and the register exchange scheme. The memory size of the proposed scheme is reduced to 1/(5 x constraint length) of that of the register exchange scheme, and the throughput is doubled compared with that of the trace-back scheme. A decoder with a code rate of 2/3, a constraint length, K＝3 and a trace-back depth of 15 is designed using VHDL and implemented in an FPGA. It is also shown that the modified register exchange scheme can be applied to a block decoding scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.703-717
• /
• 2002

This paper illustrates the implementation of a scalable shared buffer asynchronous transfer mode (ATM) switch. The designed shared buffer ATM switch has a shared buffet of a pipelined memory which has the access time of 4 ns. The high-speed buffer access time supports a possibility of the implementation of a shared buffer ATM switch which has a large switching capacity. The designed switch architecture provides flexible switching performance and port size scalability with the independence of queue address control from buffer memory control. The switch size and the buffer size of the designed ATM switch can be reconfigured without serious circuit redesign. The designed prototype chip has a shared buffer of 128-cell and 4 ${\times}$ 4 switch size. It is integrated in 0.6um, double-metal, and single-poly CMOS technology. It has 80MHz operating frequency and supports 640Mbps per port.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.555-562
• /
• 2008

In this paper we proposed a practical low-power design technique using clock-gating in RTL. An efficient low-power methodology is that a high-level designer analyzes a generic system and designs a controller for clock-gating. Also the desirable flow is to derive clock-gating in normal synthesis process by synthesis tool than to insert directly gate to clock line. If low-power is considered in coding process, clock is gated in coding process. If not considered, after analyzing entire operation. clock is Bated in periods of holding data. After analyzing operation for clock-gating, a controller was designed for it, and then a low-power circuit was generated by synthesis tool. From result, we identified that the consumed power of register decreased from 922mW to 543mW, that is the decrease rate is 42%. In case of synthesizing the test circuit using synthesizer of Power Theater, it decreased from 322mW to 208mW (36.5% decrease).

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1750-1752
• /
• 1999

An active-matrix liquid crystal display (LCD) using thin film transistors (TFTs) has been widely recognized as having potential for high-quality color flat-panel displays. Pixel-Design Array Simulation Tool (PDAST) was used to profoundly understand the gate signal distortion and pixel charging capability, which are the most critical limiting factors for high-quality TFT-LCDs. Since PDAST can simulate the sate, data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the new set of capacitance models on the pixel operations can be effectively analyzed. The set of models which is adopted from VLSI interconnections calculate more precise capacitance. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2291-2302
• /
• 1994

This paper shows the implementation and design of special processor for linearly shift knapsack public key cryptography system. We highten the density of existing knapsack vector and shift the vectors linearly in order to implement the structure of linearly shift knapsack system which has the stronger cryptosystem. As it needs the parallel processing at each path according to the characteristics of this system. we propose the pipelined parallel structure and implement this system into VLSL. Also we evaluate this system and compare with other systems. The processing speed of this system is 550kb/s when dimension is 100. It is possible to use this system at the place of requiring high speed security to enlarge the structure of it.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.18-24
• /
• 2007

As VLSI technology scales to nano-meter order, relatively increasing global wire-delay has added complexity to system design. Global wire-delay could be reduced by inserting pipeline-elements onto wire but it should be coupled with LIP(Latency Intensive Protocol) to have correct system timing. This combination however, drops the throughput although it ensures system functionality. In this paper, we propose a computation method useful for minimizing throughput deterioration when pipeline-elements are inserted to reduce global wire-delay. We apply this method while placing blocks in the floorplanning stage. When the necessary for this computation is reflected on the floorplanning cost function, the throughput increases by 16.97% on the average when compared with the floorplanning that uses the conventional heuristic throughput-evaluation-method.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2
• /
• pp.61-67
• /
• 2000

Recent progress in digital and VLSI technology has offered new possibility fer noticeable advance of hearing aids. Yet, environmental noise remains one of the major problems to hearing aid users. This paper describes results which speech recognition performance and speech discrimination performance was measured for listeners with sensorineural hearing loss, while listeners in speech-band noise. In addition, to ameliorate hearing-aided environments of hearing impaired listeners, environmental noise reduction using speech enhancement techniques are investigated as a front-end of conventional hearing aids. Speech enhancement techniques are implemented in a realtime system equipped with DSP board. The clinical test results suggest that the speech enhancement technique may work in synergy with gain functions fer the greater SNR improvement as the preprocessing algorithm of digital hearing aids.