• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.636-639
• /
• 2008

The paper deals with the improvement of various characteristics of antenna for VHF mobile handset. In the general case, $1/4{\lambda}$ monopole and helical antenna are used for VHF mobile handset. However, various characteristics of antenna have different result for effect of hand. Especially, radiation efficient is reduced about several dB. In this paper, characteristics of loaded helical antenna have been evaluated. And we propose a method to improve a radiation efficient of antenna consider with hand effect.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.5
• /
• pp.567-574
• /
• 2014

In this paper, a VHF antenna with monopole structure is designed and fabricated for marine wireless communication applications. The proposed antenna is based on a monopole design, and composed of circular ring and meander structure for VHF operation which cover VHF frequency bands. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while covering the VHF bands. And measured characteristics of gain and radiation patterns are obtained for operating bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.455-462
• /
• 2015

In this paper, we suggested multiband antenna that can be equipped on a inflatable life-jacket, operating VHF-DSC band(156 MHz), COSPAS-SARSAT band(406 MHz) and GPS band(1,575 MHz) for search and rescue survivors quickly. The GPS band antenna was implemented with a square ring-slot planar antenna, and the COSPAS-SARSAT and VHF-DSC band antenna were implemented meander type dipole antennas. In order to place the antenna on a life-jacket, we installed it on 0.2 mm thickness FR-4 substrate to obtain a flexibility. It appeared that the antenna has -14.6 dB, -30.9 dB, and -18 dB return loss in COSPAS-SARSAT, GPS, and VHF-DSC band, respectively. In addition, its gain has 0.83 dBi, 2.1 dBi in COSPAS-SARSAT and GPS band, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.619-627
• /
• 2014

In this paper, we designed a blade antenna for VHF-UHF band(500 MHz~3 GHz) to be used as aircraft antennas. Unlike previously reported researches that use high-dielectric materials and insert rectangular extended grounds, the antenna structure was designed by optimizing the curvature of both a radiator and an extended ground whose shape is varied by changing the exponent of an n-th polynomial. Based on the optimized structure, we measured impedance matching and gain performances to evaluate the antenna in the VHF-UHF band(500 MHz~3 GHz). As a result, we confirmed that the antenna shows matching characteristics of less than -6 dB and has average gains of greater than -5 dBi in the entire VHF-UHF band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1027-1035
• /
• 2016

In this paper, the method to miniaturize the radiating element of a VHF-band active electronically scanned array is proposed. The length of the proposed dipole having trapezoidal shape structure is miniaturized using meander line while the performance degradation is minimized. The grid reflector is used to improve the antenna directivity and insensitivity due to the outer environment. In addition, the antenna is designed to take into account for array application. The fabricated antenna has a 9.1 % fractional bandwidth for the voltage standing wave ratio(VSWR) 2:1 and the maximum gain of 4.24 dBi. The front-to-back ratio(FBR) is larger than 15 dB.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1031-1036
• /
• 2019

This study describes the technique of the beam pattern measurement of array antenna for VHF band radar using drone and active beam pattern measuring device. There is no anechoic chamber for measuring the beam pattern of a large size antenna in the country. In this study, to test the antenna beam pattern characteristics of the developed VHF band radar, the antenna beam pattern characteristics were tested by Drone mounting an Active Beam Pattern Measuring Device. By comparing the results of the pre-simulation analysis with the measured results for the antenna, we could confirm that the beamwidth and side-lobe characteristics are satisfactory. Through the antenna beam pattern measurement technology using Drone and Active Beam Pattern Measuring Device, the beam pattern measurement technology of array antenna of low frequency band and large antenna for low band radar will be used.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.5
• /
• pp.531-541
• /
• 1989

To protect VHF FM radio receiver from the strong interference signal, the study of antenna processor causes a strong interference signal(CW, AM, FM) to be suppressed a level below a weaker desired signal by pointing a spatial null(effective attenuation = 35dB) in the direction of the interference against a stational jamming signal.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.609-612
• /
• 2009

VHF helical antenna with sleeve is vary effective for reduce hand effect, but usually helical antenna has a small bandwidth. It is not sufficient for receive and transmission of signals. The paper deals with the application of these helical antenna. And we propose the design of frequency switching circuit for using helical antenna with sleeve.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.473-476
• /
• 2018

Herein, a $2{\times}2$ subarray antenna is designed to implement a VHF band active electronically scanned array. The Yagi-Uda antenna is used as a radiating element. The bandwidth enhancement and miniaturization of the Yagi-Uda antenna are achieved by optimizing the diameter of a driven element and the length of a director. In addition, the grid reflector is utilized to improve the front-to-back ratio(FBR) and to reduce both the wind resistance and overall system weight. The fabricated $2{\times}2$ subarray antenna fully covers the VHF target band($0.98{\sim}1.02f_c$). The measured maximum gain is 10.61 dBi and the FBR is larger than 26 dB.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.473-478
• /
• 2015

In this paper, we suggest a flexible multiband antenna which can be equipped on an inflatable life-jacket. The antenna can send distress alert and location data of survivors to assist rescue operation when crew or people are in distress. The antenna operate in three frequency bands such as VHF-DSC band (156MHz), COSPAS-SARSAT band (406MHz) and GPS band (1,575MHz). The GPS band is implemented with a square ring-slot planar antenna, the COSPAS-SARSAT band and the VHF-DSC band antenna is implemented by monopole type. In order to give flexibility of substrate to be equipped on life-jacket, FR4-epoxy substrate of thickness 0.2mm is used to make antenna. The reflection coefficients of the fabricated antenna are -8.8dB, -20.4dB and -10.7dB at each bandwidth like VHF-DSC, COSPAS-SARSAT and GPS band, respectively, when people are wearing life-jacket integrated multiband antenna.