• Title/Summary/Keyword: VHF/UHF

Search Result 80, Processing Time 0.022 seconds

A Study on Optimal ERP and Antenna HAAT for Transmission of the 8-VSB DTTB (8-VSB DTTB 송신을 위한 최적 ERP와 안테나 HAAT에 관한 연구)

  • 김재섭;임승우
    • Journal of the Korea Computer Industry Society
    • /
    • v.2 no.9
    • /
    • pp.1147-1154
    • /
    • 2001
  • In this paper, we make plans for facilities, the 8-VSB DTV transmission system, installed in the near future, based on presently NTSC TV operating it. First of all we estimate transmission power for analog NTSC, digital 8-VSB terrestrial broadcasting and the effective condition of optimal receiving power result from it. It's also to estimate optimal receiving condition by using Longley-Rice's Field Strength calculating method that is to guess a profile between transmitting station and many receiving points. The 8-VSB DTV Propagation aims to high-speed transmission rates of 19.39Mbps datum to enable HDTV(High Definition Television) at NTSC 6MHz bandwidth. First of all, an optimization of field strength between transmission station and receiver must deal with considerable. Because of these reasons, 8-VSB DTV transmission needs effective extension for NTSC TV service coverage. Finally we present the transmitting output that is expected in changing NTSC VHF to DTV UHF for maintaining the transmitting output of NTSC TV that is equal to 8-VSB DTV in service coverage.

  • PDF

Performance Evaluation of SHF Sensor for Partial Discharge Signal Detection on DC Rectifier (DC 정류기 부분방전 신호검출을 위한 SHF 센서의 성능평가)

  • Jung, Ho-Sung;Park, Young;Na, Hee-Seung;Jang, Soon-Ho
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.61 no.7
    • /
    • pp.1056-1060
    • /
    • 2012
  • Online monitoring system is becoming an essential element of railway traction system for utilized to condition based malignance management and various techniques currently employed in railway traction system. Among the various techniques, it is efficient to detect partial discharge signals by electromagnetic wave detection in order to detect insulation fault of rectifier. Although VHF (Very High Frequency), UHF (Ultra High Frequency) sensors were adopted to detect partial discharge of power facilities, due to characteristics of urban railway, excessive noise occurs from 500 MHz to 1.5 GHz on UHF bandwidth. In this paper a new measurement system able to monitoring the conditions of power facilities on DC substation in metro was studied and set up. The system uses UHF sensors to measure the partial discharge of the rectifier due to electric faulting and dielectric breakdown. Comparison and estimation for performance of SHF sensor which had devised to detect partial discharge signal of urban railway rectifier has conducted. In order to estimate performance of SHF sensor, we have compared the sensor with existing UHF sensor on sensitivity upon frequency bandwidth generated by pulse generator, and also we have verified performance of the SHF sensor by detection results of partial discharge signal from urban railway rectifier.

The Study on Empirical Propagation Path Loss Model in the Antler Terminal Environment (엔틀러 터미널 환경에서 실험적인 패스 로스 모델에 관한 연구)

  • Kim, Kyung-Tae;Kim, Jin-Wook;Jo, Yun-Hyun;Kim, Sang-Uk;Yoon, In-Seop;Park, Hyo-Dal
    • Journal of Advanced Navigation Technology
    • /
    • v.17 no.5
    • /
    • pp.516-523
    • /
    • 2013
  • In this paper, The path loss model of Air Traffic Control(ATC) telecommunication radio channel has been studied at the Incheon International Airport(IIA) with the terminal with two antlers. We measured two frequencies among VHF/UHF channel bands. The transmitting site radiated the Continuous Wave(CW). The propagation measurement was taken using the moving vehicle equipped with receiver and antenna. The transmitting power, frequency and antenna height are the same as the current operating condition. The path loss exponent and intercept parameters were extracted by the basic path loss model and hata model. The path loss exponents at passager terminal areas were 3.32 and 3.10 respectively in 128.2 MHz and 269.1 MHz. The deviation of prediction error is 9.69 and 9.65. The new path loss equation at the terminal area was also developed using the derived path loss parameters. The new path loss was compared with other models. This result will be helpful for the ATC site selection and service quality evaluation.

A Study on optimal ERP and HAAT of antenna for the 8-VSB DTTB (8-VSB DTTB의 최적 ERP와 안데나 HAAT에 관한 연구)

  • 김선미;박근희;류광진;김영곤;노순국;박창균
    • Proceedings of the IEEK Conference
    • /
    • 2001.06a
    • /
    • pp.365-368
    • /
    • 2001
  • 현재 운용중인 NTSC송신시스템을 근거로 가까운 장래에 설치되어 운용될 8-VSD DTV전송시스템의 재원을 설계한다. 먼저 아나로그 NTSC와 디지털 8-VSH DTV의 지상파 방송의 경우 최적의 수신전계를 유지할 수 있는 조건을 검토하고, Longley-Rice의 전계강도 산출법을 이용해서 수신을 위한 최소한의 전계강도의 임계값을 산출한다 8-VSH DTV전송은 NTSC 6MHz대역에서 HDTV가 가능하도록 19.39Mbps의 데이타를 고속으로 전송하는데 그 목표fmf 두고 있으므로 무엇보다 송 · 수신점 사이의 전계강도의 최적화는 중요한 문제이므로 8-VSB DTV전송은 NTSC 서비스 커버리지에 비하여 확장되거나 효율적이어야만 한다. 본 연구에서는 산출결과 NTSC가 8-VSH DTV와 동일한 서비스 커버리지를 유지하기 위하여 NTSC VHF에서 DTV UHF로 전환시 필요한 송신출력과 NTSC UHF에서 DTV UHF로의 전환시 필요한 송신출력을 산출한다.

  • PDF

An Optimal ERP and Antenna HAAT Of 8-VSB for Digital Multimedia Broadcasting

  • Kim, Seon-Mi;Park, Jung-Jin;Choi, Dong-You;Ryu, Kwang-Jin;Choi, Dong-Woo;Park, Chang-Kyun
    • Proceedings of the IEEK Conference
    • /
    • 2002.07c
    • /
    • pp.2055-2058
    • /
    • 2002
  • It designs the general description of 8-VSB DTV transmission system will be installed and operated in future on the basis of NTSC TV transmission system in operation now. First of all, it investigates a condition that can maintain optimum received field in case of ground wave broadcasting with analog NTSC and digital 8-VSB DTV. Also it calculates critical value of minimum field strength fur receiving by using field strength calculation method of Longley-Rice. The 8-VSB DTV transmission sets its goal in transmission of data with 19.39Mbps at high speed in order to be available of HDTV in the band of NTSC 6MHz. Accordingly, the optimum of field strength between transmission and receiving points most of all is important problem. So,8-VSB DTV transmission should be enlarged or effective compared with NTSC service coverage. This study is to calculate the transmission power necessary in switching from NTSC VHF to DTV UHF and from NTSC UHF to DTV UHF for maintaining service coverage that NTSC is equal to 8-VSB DTV as a result of calculation.

  • PDF

CR beaconing method in Indoor CR Network for Coexistence with WLAN system (Indoor CR 네트워크에서의 WLAN 과 공존하는 CR beaconing 방법)

  • Kim, Hyun-Ju;Yoo, Sang-Jo
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.05a
    • /
    • pp.1306-1309
    • /
    • 2007
  • 본 논문에서는 indoor 환경에서 CR 네트워크를 이용하기 위한 방안으로 CR-Wi-Fi device 시스템을 제안했으며 IU 을 보호하는 방법으로 CR beaconing 을 제안했다. IU 가 출현하면 UHF, VHF band 와 ISM band 로 동시에 이를 알리고 CR 네트워크가 간섭을 주는 경우 사용 중이던 채널 사용을 중지 혹은 이동하도록 명령해야 한다. 본 논문에서는 CR beaconing 방식을 제안하여 보다 효과적인 IU 보호 및 복구를 수행하도록 하였다.

  • PDF

Methodology of Interference Analysis Between TACAN/DME Beacons and Ground-based Link-16 Terminals (TACAN/DME 비콘과 Link-16 지상국 간의 간섭분석 방법)

  • Suh, Kyoung-Whoan
    • Journal of Advanced Navigation Technology
    • /
    • v.20 no.1
    • /
    • pp.45-52
    • /
    • 2016
  • In this paper, the method of interference analysis and its simulation have been suggested for the frequency sharing between aeronautical radio navigation systems and Link-16 platforms. In order to get the criteria for interoperability, the algorithm of interference analysis and protection ratio are derived to assure frequency sharing. Also the receiving power of wireless system has been illustrated with the help of radio propagation model of ITU-R Rec. P.1546 in VHF-UHF band. Finally the required receiving power or separation distance between DME/TACAN beacons and Link-16 ground station terminals has been considered based on system link budget in terms of evaluating interoperability as well as actual applications. As a result, if the suggested interference analysis and test set-up are applied to the field trial, it will lead to easy means to make a decision on interoperability over the existing incumbent systems.

Analysis on Interference Impact of WiFi on DTV (DTV에 대한 WiFi의 간섭영향 분석)

  • Cheng, Yan-Ming;Cho, In-Kyoung;Lee, Il-Kyoo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.11B
    • /
    • pp.1357-1362
    • /
    • 2011
  • TV White Spaces (TVWS) are freed up after transition from analog television to Digital Television (DTV). Some wireless communications are allowable to operate in TVWSs, such unlicensed Wireless Fidelity (WiFi). Because TVWSs are located in the VHF and UHF bands, TVWSs can provide significantly better coverage and wall penetration inside buildings and other structures than the 2.4 GHz and 5 GHz WiFi frequencies currently in use. Therefore, this paper assumes that WiFi will be deployed in TVWSs. However, the interference impact of WiFi on DTV has to be taken into account. The interference probability in DTV receiver was evaluated by using Spectrum Engineering Advanced Monte-Carlo Analysis Tool (SEAMCAT). As a result, when 20 WiFi UEs are simultaneously operating at the maximum transmit power of 23 dBm and the guard band is 22 MHz, the protection distance should be at least 6 km to meet the interference probability of 5% in DTV receiver.

Implementation of Modular 3-Band RF for Disaster Voice Communication (재난음성통신을 위한 Modular 3-Band RF 개발)

  • Park, Jin-Hee;Lee, Soon-Hwa
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.13 no.6
    • /
    • pp.23-28
    • /
    • 2013
  • Because characteristics of diversity, large-scale and unpredictability of disaster are very difficult to make predict of disaster, rapid disaster response activity is important to reduce damage from disaster. Therefore emergency communication technology is essential to information sharing between field personnel in the field. Because the heterogeneous radios defined as some of 100MHz VHF, 400MHz UHF, and 800MHz emergency communication RF band are used in Korea, the field personnels need to have multiple radios. In order to use one radio per personnel, radio voice intercommunication is very necessary. We study on modular 3-Band RF to communicate between heterogeneous radios through single multi-band antenna and verify scalable of the number of equipped radios.

Folded Ultra Wideband Monopole Antenna for SDR Application (Software Defined Radio (SDR) 무전기용 접힌 평면 구조의 초광대역 안테나)

  • Oh, Jun-Hwa;Oh, Il-Young;Yook, Jong-Gwan
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.46 no.12
    • /
    • pp.52-58
    • /
    • 2009
  • We propose a folded monopole antenna with loads, and analyze the roles of design parameters which affect the return loss of the proposed antenna. VSWR < 3 bandwidth of the antenna is 30 ~ 2000 MHz, ranging from the HF/VHF/UHF bands. For operating travelling antenna, we connect six loads at the end of the antenna. The reflected wave is drastically reduced due to the six loads. For improved return loss properties, we use Klopfenstein tape that determine positions and values of six loads. The propose antenna has omni-directional radiational patterns like that of conventional monopole antennas. For wideband impedance transformation, we use the balun which operating frequency region is 10 ~ 1900 MHz. We expect the proposed antenna has important role for the wideband and multi-rold multi-functional communication systems.