• The Journal of Engineering Geology
• /
• v.16 no.1 s.47
• /
• pp.45-58
• /
• 2006

A new computer program SLOPILE(Ver 3.0) is developed to analyze stability of slopes containing an earth retention system composing of piles, nails and anchors. SLOPILE(Ver 3.0) can calculate the slope stability for both planar failure surfaces in infinite slopes and arc failure surfaces. In order to investigate a design adaptability of SLOPILE(Ver 3.0), analysis results of TALREN and SLOPE/W programs are compared with that of SLOPILE(Ver 3.0). SLOPILE(Ver 3.0) can calculate the slopes reinforced by earth retention system such as piles, nails and anchors. But, TALREN and SLOPE/W can not calculate the slope reinforced by piles. As a analysis result of the example case, SLOPILE(Ver 3.0) is accuracy and suitable program for the stability analysis of slopes reinforced by earth retention system. Therefore, SLOPILE(Ver 3.0) is the most suitable program to analyze the slope reinforced by the earth retention system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.70-79
• /
• 2016

Satrec Initiative successfully developed a high-resolution electro-optical camera system, EOS-D Ver.1.0. EOS-D Ver.1.0 is the main payload of DubaiSat-2 and Deimos-2, which are developed based on the SI-300 platform of Satrec Initiative. After the launch and early operation (LEOP) of DubaiSat-2 and Deimos-2, we performed refocusing for the telescope of EOS-D Ver.1.0 to compensate for the dimensional change of its metering structure by moisture out-gassing. Before and after refocusing, we conducted the performance evaluation of thermal control system(TCS) for EOS-D Ver.1.0 using the in-orbit telemetry data. The evaluation showed EOS-D Ver.1.0 was under well-controlled thermal environment, which demonstrates TCS was designed and developed to meet all requirements.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.221-231
• /
• 2005

Though Digital Map Ver. 2.0 is adequate to GIS, the possibility to gain information from its external form and the ease of producing paper map had retrogressed. In this research, concerned with the problems, we plan to make Digital Map Ver. 2.0, which satisfies the conditions of GIS. It will have geometrical and logical data structure, and also possess informative ability as much as that of Ver. 1.0. For the study, the process to analyze the topographic code, color, code priority order, etc. of paper relief map, digital map Ver. 1.0, and digital map Ver. 2.0 was taken. For the topographical feature with diverse expression, we changed the portrayal of digital map Ver. 2.0 to make it fit the regulations of map portrayal. At the point of topographic code priority order, the rule is to arrange them in the same order as the real territory. However, we made a special code in the case of any change of the locational order. According to the property of this study, we observe the regulations of map portrayal, for the elements related to subjective sense, such as colors. And we give priority on the data construction when the portrayal of topographical feature and the schema of GIS database system are contradictory.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.289-297
• /
• 2007

Normaly, the map generlization methode has been used for the making of small scale map using a large scale map. The object join methode is consumed of a lots of processing time and the manual process. The object Join technique used in the NGI based on the digital map ver. 1.0 have problems of poor Joining rate and a lots of processing time. This study has improved the object Join technique considering of the geometry and attribute information for the digital map ver. 2.0. Using improved technique increased joining rate of object and reduced the processing time.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.174-183
• /
• 2014

The Value-Added Processing System(VAPS) was developed for post-processing the KOMPSAT imagery. Recently software version and hardware specification of VAPS were changed for improving the VAPS performance. The purpose of this study is to describe about the improvement of existing VAPS(ver.1.0) and systematically evaluate the performance of the improved VAPS(ver.2.0). To this end, test-bed areas in South and North Korea were selected and then image processing tests were conducted using KOMPSAT-2 and KOMPSAT-3 imagery in both areas. In conclusion, VAPS(ver.2.0) had an ability to generate the high level products like ortho images and mosaic images. Image processing time using the Graphic Processing Unit(GPU) on ver.2.0 was enhanced up to 10 times than ver.1.0.

• Transactions of Materials Processing
• /
• v.30 no.6
• /
• pp.306-310
• /
• 2021

In this study, IF steel, which has a body-centered cubic (BCC) crystal structure, was fabricated as a 25 mm-long cube, and then processed for one cycle without intermediate heat treatment by applying MADF Ver.1 and Ver.2 processes. MADF processing was performed with graphite lubrication for each pass at room temperature. The development of the microstructure and texture was analyzed and compared by the location of the specimen using EBSD measurements of the IF steel. Vickers hardness test and miniature tensile test were also performed to analyze the mechanical properties. The coarse grain size of 742.6 ㎛ of the as-received IF steel was refined to a grain size of 53.0 ㎛ after one cycle of MADF Ver.1 processing and 27.0 ㎛ after MADF Ver.2 processing. Vicker's hardness of the as-received IF steel at 94 Hv was increased to 185.6 Hv and 191.2 Hv after one cycle of MADF Ver.1 and Ver.2 processing, respectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.79-85
• /
• 2005

Early, national basic topographical map has been represented, stored, supplied in form of DXF(Data eXchange Format) and present digital map is equipped as over form. Since many parts of digital map has been equipped newly to use early digital map form for geographic information system. Especially, many structural editing and geographical search are demanded to exclude geometric inconsistency and logical inconsistency included in the existing digital map. As above, DXF is unsuitable data format to use in geographic information system. For the sake of efficient format, Digital Map Ver. 2.0 that is new map format was developed. In this study, we developed the Mobile Viewer program development which can let us see immediately the digital maps produced in the form of Digital Map Ver. 2.0.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.218-224
• /
• 2013

Graphene oxide (GO) was prepared by the Hummers and Offeman method from graphite. Two different types of functionalized graphene sheets (FGSs) were synthesized by using GO. Hexamethylamine (HDA) substituted vertically to the graphene sheet (Ver-HDA-GS) was synthesized from HDA and epoxy group in GSs. Whereas, horizontally substituted hexadecanol (HDO) to the GS(Hor-HDO-GS) was synthesized from HDO and alcohol groups via reduced GO (RGO), respectively. The structures of the GO, RGO, Ver-HDA-GS, and Hor-HDO-GS were identified by Fourier transform infrared (FTIR). In addition, we examined the thermal stability and morphology. Atomic force microscope (AFM) disclosed that Ver-HDA-GS consisted of one- or two-layer graphene regions. However, the Ver-HDA-GS layers showed average thickness of 1.76 nm. The thermal stabilities of the FGSs were better than those of the GO and RGO. The Ver- HDA-GS was well dispersed in common solvents such as dimethyl sulfoxide (DMSO), toluene, chloroform, and decalin.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.179-182
• /
• 2003

This paper describes the design and implementation of PLC home network system using HNCP ver.1.0. The developed home network system comprises a home server progranL a home master, and appliance emulators (e.g., for washing machine, microwave oven, and air-conditioner). Throughout the implementation of PLC home network system, the feasibility of HNCP ver.1.0 is verified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.921-930
• /
• 2013

Satrec Initiative successfully developed and verified a high-resolution electro-optical camera system, EOS-D Ver.1.0. We designed this system to give improved spatial and radiometric resolution compared with EOS-C series systems. The thermal control subsystem (TCS) of the EOS-D Ver.1.0 uses heaters to meet the opto-mechanical requirements during in-orbit operation and uses different thermal coatings and multi-layer insulation (MLI) blankets to minimize the heater power consumption. Also, we designed and verified a refocusing mechanism to compensate the misalignment caused by moisture desorption from the metering structure. We verified the design margin and workmanship by conducting the qualification level thermal vacuum test. We also performed the verification of thermal math model (TMM) by comparing with thermal balance test results. As a result, we concluded that it faithfully represents the thermal characteristics of the EOS-D Ver.1.0.