• Korean Journal of Remote Sensing
• /
• v.26 no.3
• /
• pp.297-304
• /
• 2010

Since the change in Doppler centroid according to moving targets brings alteration to the phase in azimuth differential signals of synthetic aperture radar (SAR) data, one can measure the velocity of the moving targets using this effect. In this study, we will investigate theoretically measuring the velocity of an object from azimuth differential signals by using range compressed data which is the interim outcome of treatment from the simulated SAR raw data of moving targets on the background of sea clutter. Also, it will provide evaluation for the elements that affect the estimation error of velocity from a single SAR sensor. By making RADARSAT-1 simulated image as a specific case, the research includes comparisons for the means of velocity measurement classified by the directions of movement in the four following cases. 1. A case of a single target without currents, 2. A case of a single target with tidal currents of 0.5 m/s, 1 m/s, and 3 m/s, 3. A case of two targets on a same azimuth line moving in a same direction and velocity, 4. A case of a single target contiguous to land where radar backscatter is strong. As a result, when two moving targets exist in SAR image outside the range of approximately 256 pixels, the velocity of the object can be measured with high accuracy. However, when other moving targets exist in the range of approximately 128 pixels or when the target was contiguous to the land of strong backscatter coefficient (NRCS: normalized radar cross section), the estimated velocity was in error by 10% at the maximum. This is because in the process of assuming the target's location, an error occurs due to the differential signals affected by other scatterers.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.142-150
• /
• 2019

Muzzle Velocity is one of the most important measurement items for evaluation of ammunition. The muzzle velocity is defined as the velocity when the projectile leaves the muzzle. Particularly, since the muzzle velocity is closely related to the performance of the propellant, precise measurement of muzzle velocity is required. Doppler radar is used to measure the muzzle velocity, but the quality of Doppler radar signal depends on the test site environment. In this paper, a method to remove the clutter that degrades the signal quality of Doppler radar by improving the structure of the test site and the signal processing method is suggested. For the application of the improved signal processing method, a program for acquiring Doppler radar's raw Doppler data was created. Statistical verification of the velocity data obtained through the improvement of the test site structure and signal processing method proved that the proposed method is effective for the removal of clutter as compared with the existing method.

• Advances in Computational Design
• /
• v.8 no.4
• /
• pp.309-325
• /
• 2023

An innovative inertial reactive armor is being developed through a multi-discipline project. Unlike the well-known explosive or non-explosive reactive armour that uses high-energy explosives or bulging effect, the proposed inertial reactive armour uses active disc elements that is set to rotate rapidly upon impact to effectively deflect and disrupt shaped charges and kinetic energy penetrators. The effectiveness of the proposed armour highly depends on the tangential velocity of the impact point on the rotating disc. However,for a single layer armour with an array of high-speed rotating discs, the tangential velocity is relatively low near the center of the disc and is not available between the gap of the discs. Therefore, it is necessary to configure the armor with double layers to increase the tangential velocity at the point of impact. This paper explores a multi-objective geometry design optimization for the double-layered armor using Nelder-Mead optimization algorithm and integration tools of the python programming language. The optimization objectives include maximizing both average tangential velocity and high tangential velocity areas and minimizing low tangential velocity area. The design parameters include the relative position (translation and rotation) of the disc element between two armor layers. The optimized design results in a significant increase of the average tangential velocity (38%), increase of the high tangential velocity area (71.3%), and decrease of the low tangential velocity area (86.2%) as comparing to the single layer armor.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3
• /
• pp.107-112
• /
• 2006

The elastic waves in a plate are dispersive waves due to the characteristics of Lamb waves. However, S0 symmetric mode is less dispersive in the frequency region below the first cut-off frequency. The wave Propagation velocities vary with the direction in anisotropic plates such as Carbon Fiber Reinforced Plastic (CFRP) Plates. The wave vector direction and energy flow vector direction are same in isotropic plates. However, the wave vector direction same as the phase velocity direction is not in accordance with the energy flow direction same as the group velocity direction in anisotropic plates. In this study. the dispersion curves or the phase velocity from anti-symmetric and symmetric Lamb wave dispersion equation are calculated for unidirectional laminated composite plate. Slowness surface is sketched using phase velocity under the first cut-off frequency. The direction and magnitude of group velocity are corrected with this slowness surface. The measured group velocities are in good agreement with the corrected group velocity curve except near the fiber direction zone which is called the cusp region.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.424-431
• /
• 2006

Roll drafting, a mechanical operation attenuating fiber bundles to an appropriate thickness, is an important operation unit for manufacturing staple yams. It influences not only the linear density regularity of the slivers or staple yams that are produced, but also the quality of the textile product and the efficiency of the thereafter processes. In this research, the dynamic states of the fiber bundle in the roll drafting zone were analyzed by simulation, based on the mathematical model that describes the dynamic behavior of the flowing bundle. The state variables are the linear density and velocity of the fiber bundles and we simulated the dynamics states of the bundle flow, e.g., the profiles of the linear density and velocity in the draft zone for various values of the model parameters and boundary conditions, including the initial conditions to obtain their influence on the dynamic state. Results showed that the mean velocity profile of the fiber bundle was strongly influenced by draft ratio and process speed, while the input sliver linear density has hardly affected the process dynamics. Velocity variance of individual fibers that could be supposed to be a disturbing factor in drafting was also influenced by the process speed. But the major disturbance occurred due to the velocity slope discontinuity at the front roll, which was strongly influenced by the process speed. Thickness of input sliver didn't play any important role in the process dynamics.

• Journal of computational fluids engineering
• /
• v.19 no.3
• /
• pp.1-7
• /
• 2014

One of the most important factors in sailing yacht design is an accurate velocity prediction. Velocity prediction programs (VPPs) are widely used to predict velocity of sailing yachts. VPPs, which are primarily based on experimental data and experience of long years, suffer limitations applied in realistic conditions. Thus, in the present study, a high fidelity velocity prediction method using the computational fluid dynamics (CFD) is proposed. Using the developed method, velocity and motion of a 30 feet sloop yacht, which was developed by Korea Research Institute of Ship and Ocean (KRISO) and termed KORDY30, were predicted in upwind sailing condition.

• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.4
• /
• pp.77-81
• /
• 2017

Purpose : This study examined the effects of driving rehabilitation functional training on visual perception ability and driving reaction velocity. Those subjects were put under MVPT-3 test to see their visual perceptual functions before and after the 4weeks' driving rehabilitation function training and then put to TMT A-type test to see their driving reaction velocity performance. The followings are the results of this study. Methods : Using a driving simulator, driving rehabilitation functional training was performed targeting men and women aged in 20s 20 minutes per time, two times per week, for a month. Results : As for the change in visual perception, the Raw Score of MVPT-3 very significantly increased (p<.01), and the Standard Score also very significantly increased (p<.01). As for the change in reaction velocity, TMT A-type very significantly decreased (p<.01), and TMT B-type also very significantly decreased (p<.01). Conclusion : It could be found that driving rehabilitation functional training should be effective for both visual perception and reaction velocity. Consequently, the driving rehabilitation function training can be applied to clinics as training method for functional recovery and improvement of visual perceptual functions and driving reaction velocity performance ability of the patients. Thus, various functional programs should be studied in the future.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.2 no.1
• /
• pp.19-25
• /
• 2009

Pes planus is a condition where the arch of the foot collapses and comes in contact with the ground. The purpose of study was to confirm the effect of a patient-customized insole on both feet velocity of pes planus with and without the insole, in order to establish both feet velocity as a rehabilitation evaluation factor of pes planus in future. As a result, the average velocity shifts of both feet showed that left foot is 2.96%, right foot is 1.09% via gait experiment with 13 pes planus patients with and without insole. Therefore this study verified that the patient-customized insole effects on both feet velocity of pes planus. However further study needs to demonstrate both feet velocity as a rehabilitation evaluation factor in pes planus.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.9-18
• /
• 1998

In this paper, we present the degradation of focusing induced by velocity inhomogeneity in human tissue. For simulation, the fatty layer which is the major factor of degradation for its lower velocity, is modeled as a uniform velocity perturbation layer. And we simulate the degradation of resolution resulting from change of beam path due to refraction and the time delay due to velocity difference. We show that focusing error can be compensated for considering the velocity inhomogeneity only. The proposed compensation method can be operated in real time in the presently used digital focusing systems.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.33.3-34
• /
• 2015

We present the spectroscopic study of the globular clusters (GCs) in the massive elliptical galaxy M86 in the Virgo galaxy cluster. Using the spectra obtained from the Multi-Object Spectroscopy (MOS) mode of Faint Object Camera and Spectrograph (FOCAS) on the Subaru Telescope, we measure the radial velocities for 56 GCs in M86. The mean velocity of the GCs is derived to be $<v_p>=-335{\pm}41km/s$, which is different from the velocity of the M86 nucleus ($<v_{gal}>=-224{\pm}5km/s$) within ${\sim}2.5{\sigma}$. The mean velocity ($<v_p>=-342{\pm}60km/s$) of 33 blue GCs in M86 is similar to that ($<v_p>=-314{\pm}71km/s$) of 23 red GCs. We also derive the mean velocities of the GC systems in other 16 nearby early-type galaxies (ETGs) from the radial velocity data in the literature. The mean value of the differences between the mean velocity of the GC systems in each galaxy and the nucleus velocity of their host galaxies, is almost zero except the M86 GC system. But the scatter of the differences in the blue GC system is larger than that in the red GC system. We will discuss these results in the context of GC formation in ETGs.