• 제목/요약/키워드: VDT작업

검색결과 94건 처리시간 0.022초

자연채광을 이용한 인공조명의 제어방법에 관한 실험적 연구 (A experimental study on artificial illumination control)

  • 차광석;김회서
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1993년도 추계학술발표회논문집
    • /
    • pp.38-43
    • /
    • 1993
  • 현재의 오피스는 공간이 좁고, 바닥위의 배선이 장애물이며, 형광전구가 노출된 조명으로 실내 작업환경에 대한 고려가 매우 미약한 점에 의심할 여지가 없다고 생각된다. 특히 OA기기의 도입에 따른 집무 공간의 감소, 프린터 소음, 기기의 발생열, 배선, VDT(Visual Display Terminal:화면이 있는 OA기기) 작업과 관련된 환경 관리, 작업관리, 건강관리의 필요성등의 문제가 발생하고 있다. 그러므로 쾌적한 분위기를 구성요소로 조명은 실의 LAY OUT, 표면처리, 배색등 인테리어 디자인과 함께 그 효과를 최대한으로 연출하도록 되리라 생각된다. 따라서, 자연채광 이용을 통하여 절감될 수 있는 인공조명(형광등)의 제어방법으로서 본 논문에서는 점멸방식(ON,OFF)을 시도하였으며 점멸에 따른 급격한 조도저하를 보다 심리적인 차원을 고려한 실내조명 조광장치(천정형태와 외부에 댄 반사판)로 인한 실내조도 분포의 영향에 대하여 파악하고자 하였다.

  • PDF

컴퓨터 워크스테이션의 인간공학적 디자인 (Ergonomic Design of Computer Workstation)

  • 정석길;이상도
    • 디자인학연구
    • /
    • 제12권1호
    • /
    • pp.157-166
    • /
    • 1999
  • 컴퓨터의 도입과 함께 VDT 증후군이라는 새로운 사회문제가 제기되고 있다. 다양한 체격의 사용자가 무리 없는 자세로 VDT작업을 수행하기 위해서는 인간공학적인 설계기준이 필요하다. 본 연구에서는 선 연구의 설계지침을 이용하여 설계 권장치수를 먼저 제시하였다. 이에 대찬 타당성 검증을 위해 사용자의 선호치수를 구하였고, 그것과 설계지침에 따른 차이를 분석하였다. 그리고 안락감과 신체불편도 평가를 통한 주관적 평가와 근전도(EMG)분석을 통한 객관적 평가를 사용하여 각 설계치수가 인체에 미치는 영향을 비교분석 하였다. 워크스테이션에서 중요한 키보드의 높이는 팔꿈치보다 높이가 낮다면 손과 손목에 영향을 미치고, 높으면 목과 어깨에 피로를 가져다준다. 본 연구 실험결과 한국인을 위한 키보드책상의 권장치수는 고정식일 때 660mm 조절식일 때 540-774mm를 추천한다. 그 외 설계권장치수는 본문에 제시하였으며 이와 같은 인간공학적 권장치수는 결론적으로 사용자의 신체에 맞게끔 조절범위를 제공하므로 설계 분야에 중요한 기초자료가 되리라본다.

  • PDF

사무실 조명에서의 Discomfort Glare 계산법 적용 및 평가 (Evaluation of Discomfort Glare Indices in Office Lighting)

  • 허남돈;김훈
    • 조명전기설비학회논문지
    • /
    • 제16권6호
    • /
    • pp.13-21
    • /
    • 2002
  • 실내공간에서 보편적으로 사용되는 조명방식으로 TAL 및 전반조명방식 등을 언급할 수 있는데, 일반적으로 우리나라 실내 조명환경에서는 전반조명방식을 채택하고 있다. 여기서, 가장 주요한 조명기술 요소가 바로 Glare이며, 특히 VDT를 사용하는 작업환경에서는 더욱 그러하다. 이러한 실내 조명환경에서의 Glare에 대한 연구 및 평가법은 CIE 및 IESNA 등에서 꾸준히 연구되어 제시되고 있으며, 각종 실내 조명환경에 따라 다르게 적용되고 있다. 한편, 국내의 실내 조명상황에 대해 Glare평가를 위한 G 분류가 제시되고 있지만, 평가에 있어 그 한계성이 있으며, 이 외에는 좀더 상세한 Glare 규정이 없는 실정이며, 각종 실내 조명환경에 적용하기가 어려운 게 사실이다. 본 논문에서는, 위에서 제시하고 있는 주요 Glare규정들을 가지고, 국내의 조명상황에 맞춰 실내 공간 및 조명기구 등을 각각 선정한 후, Glare 평가법들을 적용하였다. 또한 국내의 실내 조명환경에 적합한 Glare Index를 제시하고자, 평가법 상호간의 비교 및 적합성을 꾀하고자 하였으며, 더 나아가 국내에 맞는 Glare Index를 마련하고자 하였다.

VDT작업에서의 근골격계 질환 예방을 위한 새로운 팔 지지대 제안 (Proposal of a Movable Armrest for Preventing the Musculoskeletal Disorders)

  • 박경수;김상수;조일행;홍기범
    • 대한인간공학회지
    • /
    • 제25권2호
    • /
    • pp.1-10
    • /
    • 2006
  • In spite of the rapid increase of computer use in our everyday life, not much effort is undertaken to take measures to prevent Musculoskeletal Disorders(MSDs). In this paper, we suggest a movable armrest which would lower the exposure to the MSDs, especially on the vicinity of arm. The aim of this study is to determine whether there are differences in wrist angle variations, forearm muscular loads, comfort and normal performance between the invented movable armrest and a conventional armrest when using a computer mouse. Eight experienced VDU workers performed a standardized simple task set which consists of 15 detailed tasks with each armrest. The wrist angle variations in the right arm were registered by electrogoniometer and the muscle activities in the shoulder, deltoid and two extensors in the forearm were also registered by electromyograph. The subjects rated perceived comfort while performing the tasks with each armrest. Working with the invented armrest, compared to general, gave significantly decreased wrist angle variations at most of the detailed tasks of both biaxial movements. Moreover, as the distance of targets increased, the difference of muscle activities in two different situations trend to be increasing. At the same time, in work with invented armrest, the subjects rated more comfort and they showed decreased normal performances in 8 detailed tasks which were mainly caused by macro moving time.

컴퓨터 작업에서 마우스 종류에 따른 상완 부하 평가 (Assessment of the Upper Limb Work Load according to the Mouse Size in VDT Tasks)

  • 송영웅;김경아
    • 대한산업공학회지
    • /
    • 제37권3호
    • /
    • pp.209-215
    • /
    • 2011
  • The objective of this study was to determine whether there are differences in hand muscle activities (APB : abductor pollicis brevis, ED : extensor digitorum, ECU : extensor carpi ulnaris, and EI : extensor indicis) and subjective discomfort according to the three mouse sizes (small, medium, large) and two task types (pointing and scrolling). The mouse size and task type showed significant interaction effects on the total NEMG (p = 0.004) and on the NEMG of the abductor pollicis brevis muscle (p = 0.001). The total NEMG and the NEMG of APB showed the highest value in the 'scrolling' task using the 'small' mouse. However, the NEMG of the EI was different according to the mouse size, and the 'small' mouse showed the lowest value. The subjective discomfort was the lowest in the 'medium' mouse, and all nine subjects preferred the 'medium' size. The hand-size related anthropometric variables showed different correlations according to the task type and mouse size with the NEMGs and subjective discomfort. The results of this study could be used as a basic information for the determination of the proper mouse size according to the hand size.

인텔리전트 빌딩의 공간특성을 고려한 배경결정과 형광등가구 설계 (Decision of the Luminous Intensity Distribution and Design of Fluorescent Luminaire based on Space Features of the Intelligents Building)

  • 이정욱;김홍범;한종성;김훈
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2000년도 학술대회논문집
    • /
    • pp.123-128
    • /
    • 2000
  • 공간의 효율적 조명시스템의 설계를 위해서는 그 공간의 물리적 조건들과 작업의 내용 등을 고려하여 표준적인 상황을 규정하고, 그 상황에서 가장 유용한 조명설계를 찾아내어 표준화해야 한다. 특히, 인텔리전트 빌딩에서는 OA도입으로 인한 VDT 작업환경, 취업인구의 고령화 등의 공간특성을 고려한 조명계획이 요구되며 이러한 조명계획을 구현할 수 있는 조명기구를 제작할 필요가 있다. 따라서 이 연구에서는 국내 인텔리전트 빌딩의 주요공간별 크기와 형태 및 특성을 조사하여 표준공간을 선정했고, 이를 반사판 설계에 반영하여 3가지 형태의 형광등기구를 설계, 분석하였다.

  • PDF

VDT 작업환경에서 작업시간이 근피로에 미치는 영향 (The Effect of Working Hour on Muscle Fatigue in Visual Display Workplace)

  • 한정수
    • 한국안전학회지
    • /
    • 제15권1호
    • /
    • pp.153-160
    • /
    • 2000
  • Occupational cumulative traumas (CTDs) are becoming one of leading ailments in industrialized worl $d^{(1.2)}$. The degree of muscle fatigue is important parameter to understand cause of occupational cumulative trauma disorders. To quantify degree of muscle fatigue, muscle EMG activity was measured during isometric and dynamic contractions(repetitive concentric/eccentric muscle contraction) and its analyzed data, such as RMS, median frequency, and median power were compared when the muscle was fresh and exhausted. When muscle become fatigue, it was observed that median frequency decreased and median power and RMS increased However, based on overall prolonged observation, median frequency increased and median power and RMS decreased. Therefore it was concluded that shifting patterns of RMS, median frequency, and median power values can be used as parameter to evaluate degree of muscle fatigue even in dynamic muscle contraction.

  • PDF

연령증가에 따른 수지교류성의 변화에 대하여 (On change of manual dexterity with ageing)

  • 신승헌;서승록
    • 대한인간공학회:학술대회논문집
    • /
    • 대한인간공학회 1993년도 추계학술대회논문집
    • /
    • pp.33-37
    • /
    • 1993
  • 근래 우리나라에서도 평균수명이 길어져 노동의욕이 있는 중고령자가 증가하는 한편, 출산율이저 하되어 젊은 근로자의 수가 감소되고 있다. 통계청의 인구통계과의 추계에 의하면 2000년에는 60세 이 상이 총인구에 점하는 비율이 10.7%, 65세 이상은 6.8%가 되고, 2020년에는 60세 이상이 19.5%, 65세 이 상도 12.5%에 도달한다는 것이다. 인구노령화로 인한 고령화 사회에 대한 준비를 서둘러야 할 때라고 생각된다. 또 고령화 사회로 되면 젊은 연령층의 경제적 부담이 증가되므로 중고령자의 노동인구를 이대 로 방치해 두는 것은 국가적으로나 사회복지적으로나 불경제라고 할 수 있다. 그런데, 문제가 되는 것은, 중고령자를 취업시키는 것이 오히려 사회의 생산성을 저하시키거나 경제적으로 불리하게 되어서는 안되는 것과 중고령노동자 자신의 안전을 확보해야 하는 것이다. 이러한 문제를 해결하기 위해서는 고용에 있어 서 어떠한 점에서 중고령노동자에게 특징과 문제가 있는가를 분명히 할 필요가 있다. 고령자는 청년자 보다 노동능력이 떨어지는 특징과 문제가 있는가를 분명히 할 필요가 있다. 고령자는 청년자 보다 노동능력이 떨어지는 경향이 있지만 개인차도 크고 고령자 중에는 청년자의 기능에 비교해도 뒤떨어지지 않는 자도 있다. 연령만으로 노동능력을 판정하는 것은 적절한 방법이라고 할 수 없다. 문헌에 의하면 역연령(chornological age)이 25세의 경우, 생리적 연령은 23세에서 27세로 4년 차이가 있다고 한다. 이러한 생리적 연령의 차이는 역연령이 더해감에 따라서 점차 크게 되어 역연령이 45세에서는 12년, 80세 에서는 20년이나 된다는 것이다. 이것은 인간에 있어서 시간적 경과를 나타내는 역연령 이외에 신체적 기능연령(functional age)가 있다는 것을 의미하는 것이다. 한편, 생산현장에서는 자동화, 기계화가 진보되어 육체적인 노동이 경감된 결과, 중고령자라도 할 수 있는 작업이 많아지고 있다. 또, VDT (Visual Dislay Terminal) 작업과 같은 정보처리 작업의 수요가 증가하여 그 인재의 부족이 지적되고 있다. 따라서 중고령자의 기능을 조사하여 어떠한 작업에 적합한가를 판단하는 것이 중요한 과제로 되었다. 그러나 노동에는 많은 기능이 관여 하고, 그 내용에 따라서 요구되는 기능이 서로 다르기 때문에 노동적응능력의 기본적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.

  • PDF

전화번호안내원의 단순반복작업에 의한 상지의 작업관련성 근골격계장애 영향 요인 (Affecting Factors of Upper Extremity Work-Related Musculoskeletal Disorder Among the Directory Assistance Operator)

  • 김영민
    • 대한정형도수물리치료학회지
    • /
    • 제13권2호
    • /
    • pp.85-95
    • /
    • 2007
  • Purpose: The purpose of this study was to investigate the prevalence and affecting factors of work-related musculoskeletal disorder (WRMSD) among the directory assistance operators. Methods: One hundred eighty-five female subjects who worked more than one year as directory assistance operators in a telecommunication company were surveyed with self-administered questionnaires. Subjects were divided into disorder and control group by the NIOSH criterion about WRMSD, and then analyzed. Results: One hundred seventy two subjects (93%) had upper extremity symptoms and seventy subjects (37.8%) were WRMSD. the frequency order of the disorder area was the shoulder 60(32.4%), the neck 37(20.0%), the wrist 20(10.8%), the finger 20(10.8%) and the elbow 5(2.7%). It was found that the difference factors of the WRMSD group were education level (p<0.01), stress from the customers (p<0.01), satisfaction about monitor (p<0.05), temperature (p<0.05), noise (p<0.01), ventilation (p<0.001), working time (p<0.05), and recess (p<0.001). Conclusion: Improving working condition and education for the workers to control the stress are necessary to decrease the WRMSD for the directory assistance operators.

  • PDF

범용 위험도 평가서를 이용한 조선업체 작업에서의 누적외상성질환에 대한 인간공학적 분석 (An Application of a Baseline Checklist for Risk Assessment of Cumulative Trauma Disorders in Shipyard Workers)

  • 박동현;한상환
    • 한국산업보건학회지
    • /
    • 제8권1호
    • /
    • pp.24-35
    • /
    • 1998
  • Cumulative trauma disorders(CTDs) have been a growing problems for US and European industries with higher incidence rate every year. The increase and their associated costs has led companies to form committes and implement programs to address this problem. In our country, we have just started to recognize and to work on the problems in industry. This study conducted an ergonomic analysis for typical jobs of ship building industry which was not usually surveyed for CTD problem. A baseline CTD checklist which was supposed to do a risk assessment was developed and applied in this study. Initially, we considered five major parts in the checklist which consisted of personal, frequency, posture, force, and miscellaneous information. Most jobs in ship building industry were much different from typical assembly work and VDT work that have been major part of the previous CTD studies. Specifically, job characteristics in terms of frequency and posture were quite different. There were relatively long cycle time, awkward postures for whole body (not just for upper extremities). Also, CTD risk scores based on checklist were a lot higher than the scores for VDT jobs which was a case of preceding application of the checklist. Specifically, grinding jobs turned out to be the most risky one in terms of CTDs. In conclusion, usual CTD prevention guidelines are not likely to he effective in this type of industry. An individual job based interventions are strongly suggested to have a good control of CTD problems in ship building industry.

  • PDF