• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.565-569
• /
• 2003

We designed a transflective-type LCD using a twisted VA mode. Generally, a VA mode had a blue shift due to intrinsic properties. We solved this problem using spectroscopic compensation film. We used the front scattering film and negative C-plate to improve characteristics of the viewing angle and contrast ratio. As a result, we found that proposed the transflective-type TVA mode had a contrast ratio of about 80:1, a response time of 22 ms, and a reflectance of 25% in comparison with the standard MgO reflector.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.118-119
• /
• 2000

최근에 많이 사용되는 휴대용기기의 표시장치인 액정표시장치를 보면 반사형 액정표시장치가 많이 사용되고 있다. 반사형 액정표시장치는 표시장치의 전력소모의 많은 부분을 차지하는 backlight 를 주변 광원으로 대체하여 전력소모를 줄일 수 있는 표시장치로서 많이 연구되고있다. 최근에 연구되고있는 반사형 표시장치를 살펴보면 반사형 TN (Twisted Nematic) LC 모드가 주류를 이루고 있으나 콘트라스트비가 낮은 단점이 있다$^{[1]}$ . 이를 극복하기 위하여 반사형 VA (Vertical Aligned) LC 모드가 제시되어진다. VA LC 모드는 TN LC 모드와 반대로 음의 유전율 이방성을 가지는 액정물질을 이용하여 유리기판에 수직으로 배향시킨 모드로서, 전압이 인가되지 않은 초기상태에는 액정 cell 이 복굴절을 전혀 나타내지 않는다. TN LC 모드와 정확히 역의 구조를 가진다. 그리하여 초기상태에서 편광판 한 장과 광대역 λ/4 위상지연판을 사용하여 뛰어난 어두운 상태를 구현할 수가 있다. (중략)

• Information Display
• /
• v.5 no.5
• /
• pp.10-12
• /
• 2004

우수한 화질특성을 나타내는 새로운 반투과형 액정모드를 개발했다. 단일 셀캡 구조에서 감마(Gamma) 보정없이 투과모드와 반사모드를 동시에 구동하기 위해 유기막을 이용하여 반사모드 영역의 액정 Cap을 두 가지로 분리하는 새로운 설계구조를 도입했다. 반사모드 영역의 액정 Cap을 순수한 액정 $Cap(C_{LC})$과 유기막 $Cap(C_{OL})$으로 분리함으로써 액정에 걸리는 실제 전압을 조절하게 되어 단일 셀캡 구조에서도 감마 보정없이 우수한 특성을 나타내는 반투과형 VA 액정모드를 개발하였다. 이러한 Cap-Divided 방식의 신규 VA 액정모드는 높은 콘트라스트, 광시야각 특성 및 공정 단순화의 장점이 있기 때문에 향후 반투과형 LCD에 적극적인 채용이 기대되어진다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.545-548
• /
• 1999

The electro-optical characteristics of photo-aligned vertical-alignment (VA)-liquid crystal display (LCD) with non-polarized ultraviolet (UV) light irradiation of 45\`on homeotropic polyimide (Pl) surface were investigated. LC alignment on photo-aligned VA-LCD is attributed to photo-depolymerized reaction of the polymer with non-polarized UV light irradiation on PI surface. We had good voltage-transmittance (V-T) characteristics of photo-aligned VA-LCD. The response time of photo-aligned VA-LCD was slower than that of the rubbing-aligned VA-LCD. Finally, we suggest that the slow response time of photo-aligned VA-LCD depends on the LC domain.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.549-552
• /
• 1999

We have developed an novel vertical-alignment (VA) - $\pi$ cell mode that provides a wide viewing angle and fast response times for negative dielectric anisotropy nematic liquid crystal (NLC) on a homeotropic polyimide (PI) surfaces. We had the good voltage-transmittance curves and low driving voltages were achieved with the novel VA - $\pi$ cell mode without negative compensation film. Iso-viewing angle characteristics using the novel VA - $\pi$ cell mode without negative compensation film of NLC was also successfully observed. As well a fast response time of 31.7ms for the novel VA - $\pi$ cell mode was measured. Consequently, It is seen that by using the novel VA - $\pi$ cell mode the iso-viewing angle, fast response time, and low driving voltage characteristics can be achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.332-336
• /
• 2000

We have developed a novel vertical-alignment(VA) -$\pi$ cell mode that provides a wide viewing angle and fast response times for nematic liquid crystal(NLC) with negative dielectric anisotropy on a homeotropic polymide(PI) surfaces. Good voltage-transmittance curves and low driving voltages were achieved with the new VA-$\pi$ cell mode without a negative compensation film. Iso-viewing angle characteristics using the new VA-$\pi$ cell mode without a negative compensation film was also successfully observed. As well a fast response time of 31.7 ms for a new VA-$\pi$ mode was measured. Consequently the iso-viewing angel fast response time and low driving voltage characteristics using a VA-$\pi$ cell can be achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.883-886
• /
• 2000

We have developed a novel vertical-alignment(VA) - 1/6$\pi$ mode that provides a wide viewing angle for nematic liquid crystal (NLC) with negative dielectric anisotropy on a homeotropic polyimide (PI) surfaces. Good voltage-transmittance curves were achieved with the new VA - 1/6$\pi$ cell model without a negative compensation film. The viewing angle of a new VA -1/6$\pi$ cell without a negative compensation film was wider than that of a conventional VA cell. Finally, the wide viewing angle using the new VA-1/6$\pi$ cell mode can be achieved.

• Information Display
• /
• v.14 no.1
• /
• pp.13-22
• /
• 2013

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.4
• /
• pp.100-105
• /
• 1998

This paper proposes a new control strategy of bidirectional uninterruptible power supply (UPS) with the performance of active power filter which compensates the harmonics and reactive power. With only one power stage, it is working simultaneously as the AC/DC rectifier/battery charger and DC/AC inverter to the operation of battery charging or back-up power supplying. Therefore the operation of the proposed system can be divided into the modes, such as the active power filter mode and the battery back-up power mode. And a novel closed-loop control strategy is used to calculate the reference current. The performance of the proposed 5[kVA] system is verified by the simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1362-1363
• /
• 2011

본 논문은 250[kVA]의 용량을 갖는 Induction machine을 이용하여 FESS(Flywheel Energy Storage System)를 PSCAD/EMTDC를 통하여 전동모드(Motoring mode)와 발전 모드(Generating mode)에 관하여 시뮬레이션 한 논문이다.