• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.226-230
• /
• 2003

In this thesis I analyzed that V5.2 protocol function is effective to fulfill all of the services that are provided at the existing local exchange. I analyzed this in five methods that refer to ETSI inside patronage. I experimented turnaround time by Start-up method and verified V5.2 protocol function when Start-up. Also I confirmed stability of system by the reconstruction-ability experiment related E1 switch over. I verified V5.2 protocol function through PSTN call process that uses a special service test and local call simulator. As a result of experiment, I confirmed the best method when simultaneous Start-up. V5.2 protocol function was excellent and It becomes switch over at 1/1000 seconds when E1 is out of service. V5.2 protocol function was effective to fulfill all of the special services that are provided at local exchange and its long call process ability was superior to KT standard with 4 fails in 20000 calls. Through the experiment, it was proved that V5.2 interface will become a significant element of communication network when after LE side expanse of v5 interface ID with TDX-100 exchanger and the AN occurrences OOS by message transmission limit and call disconnect when E1 switch over are improved.

• Current Photovoltaic Research
• /
• v.6 no.2
• /
• pp.31-38
• /
• 2018

Multijunction solar cells present a practical solution towards a better photovoltaic conversion for a wider spectral range. In this review, we compare different types of multi-ijunction solar cell. First, we introduce thin film multijunction solar cell include to the thin film silicon, III-V material and chalcopyrite material. Until now the maximum reported power conversion efficiencies (PCE) of solar cells having different component sub-cells are 14.0% (thin film silicon), 46% (III-V material), 4.4% (chalcopyrite material) respectively. We then discuss the development of multijunction solar cell in which c-Si is used as bottom sub-cell while III-V material, thin film silicon, chalcopyrite material or perovskite material is used as top sub-cells.

• Korean Journal of Remote Sensing
• /
• v.32 no.5
• /
• pp.435-452
• /
• 2016

Land Surface Temperature (LST) has been operationally retrieved from the Communication, Ocean, and Meteorological Satellite (COMS) data by the spilt-window method (CSW_v2.0) developed by Cho et al. (2015). Although the CSW_v2.0 retrieved the LST with a reasonable quality compared to the Moderate Resolution Imaging Spectroradiometer (MODIS) LST data, it showed a relatively poor performance for the strong inversion and lapse rate conditions. To solve this problem, the LST retrieval algorithm (CSW_v2.0) was updated using the simulation results of radiative transfer model (MODTRAN 4.0) by considering the diurnal variations of air temperature. In general, the upgraded version, CSW_v3.0 showed a similar correlation coefficient between the prescribed LSTs and retrieved LSTs (0.99), the relatively smaller bias (from -0.03 K to-0.012 K) and the Root Mean Square Error (RMSE) (from 1.39 K to 1.138 K). Particularly, CSW_v3.0 improved the systematic problems of CSW_v2.0 that were encountered when temperature differences between LST and air temperature are very large and/or small (inversion layers and superadiabatic lapse rates), and when the brightness temperature differences and surface emissivity differences were large. The bias and RMSE of CSW_v2.0 were reduced by 10-30% in CSW_v3.0. The indirect validation results using the MODIS LST data showed that CSW_3.0 improved the retrieval accuracy of LST in terms of bias (from -0.629 K to -0.049 K) and RMSE (from 2.537 K to 2.502 K) compared to the CSW_v2.0.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.26-36
• /
• 2022

Recently, studies have been conducted to cluster vehicles and disseminate safety messages in a VANET environment for driver safety and smoothy traffic. This paper proposes cluster management scheme for safety message dissemination through V2V communication and V2I communication in a VANET environment with high vehicle density and mobility. The proposed scheme reduces packet loss by selecting CH considering reception quality, total data owned by vehicles, moving speed, and connected vehicles, and maintaining cluster head candidates, which are the main agents of message dissemination, considering frequent cluster departures and subscriptions. In addition, the proposed scheme reduces duplicate messages by utilizing clusters by collaborating with a Road side unit(RSU). To prove the excellence of the proposed scheme, various performance evaluations are performed in terms of message packet loss and the number of RSU processing requests. As a result of performance evaluation, the cluster management scheme proposed in this paper shows better performance than the existing scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.526-531
• /
• 2014

Vehicular communications have been receiving much attention in intelligent transport systems(ITS) by combining communication technology with automobile industries. In general, vehicular communication can be used for vehicle-to-vehicle(V2V) and vehicle-to-infrastructure( V2I) communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environment(WAVE). WAVE system transmits signal in 5.835~5.925 GHz frequency band with orthogonal frequency division multiplexing(OFDM) signaling. In this paper, after 32 bit processed the channel monitoring in MAC(Media Access Control) layer of WAVE system implemented according to IEEE 802.11p standard, data were received and we evaluated the performance, we built the test bed consisting of OBU(On Board Unit) in the real expressway. We transmitted WSM(WAVE Short Message) and received WSM between OBU wirelessly. And then, we calculated channel occupancy time per one frame and throughput, and evaluated the performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.183-189
• /
• 2018

With the recent advancement of vehicle wireless communication technology, many vehicular clouds have been proposed. The existing research focused on cloud services through data collection based on vehicular networks of mobile V2V (Vehicle-to-Vehicle) and V2I (Vehicle-to-Infrastructure). In this paper, we present a vehicular datacenter model that utilizes the vehicle in the parking space as a resource for the datacenter. Also, we derive resource allocation strategy based on the expected execution time considering the leave rate of each vehicle in our vehicular datacenter model. Simulation results show that our proposed resource allocation strategies outperform the existing strategy in terms of mean execution time.

• Annual Conference of KIPS
• /
• 2021.11a
• /
• pp.322-325
• /
• 2021

자율주행 자동차는 최근 들어 비약적인 발전을 거듭하고 있지만, 동시에 V2V, V2I 등 차량의 네트워킹에 따른 보안 문제에 대한 중요도 또한 함께 올라가고 있다. 이에 대비책으로 SCMS 를 중심으로 보안 기술이 발전하고 있지만, 중앙 데이터베이스에 대한 의존도는 여전히 높아 한 번의 보안 사고에도 심각한 피해가 우려되는 상황이다. 본 논문은 이러한 상황을 방지하기 위해 블록체인의 DID(Decentralized Identify, 탈중앙화 신원증명) 기술을 적용하는 방안을 설명하고, 그 예시로 긴급 차량에서의 DID 활용 방안을 제안한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.528-533
• /
• 2016

A low voltage high PSRR CMOS Bandgap circuit capable of generating a stable voltage of less than 1 V (0.8 V and 0.5 V) robust to Process, Voltage and Temperature (PVT) variations is proposed. The high PSRR of the circuit is guaranteed by a low-voltage current mode regulator at the central aspect of the bandgap circuitry, which isolates the bandgap voltage from power supply variations and noise. The isolating current mirrors create an internal regulated voltage $V_{reg}$ for the BG core and Op-Amp rather than the VDD. These current mirrors reduce the impact of supply voltage variations. The proposed circuit is implemented in a $0.35{\mu}m$ CMOS technology. The BGR circuit occupies $0.024mm^2$ of the die area and consumes $200{\mu}W$ from a 5 V supply voltage at room temperature. Experimental results demonstrate that the PSRR of the voltage reference achieved -118 dB at frequencies up to 1 kHz and -55 dB at 1 MHz without additional circuits for the curvature compensation. A temperature coefficient of $60 ppm/^{\circ}C$ is obtained in the range of -40 to $120^{\circ}C$.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.220-227
• /
• 2014

This paper presents a control method of Single-Inductor Dual-Output DC-DC Converter using Common mode feedback and differential feedback loops. To generate duty used for differential mode feedback loop, this paper propose relative sawtooth circuit using current divider circuit which makes ramp signal with variable dead-time. Two outputs of the Single-Inductor Dual-Output DC-DC Converter are specified for 2.8 V and 4.2 V with input voltage 2.5 V. The maximum conversion efficiency of designed SIDO DC-DC Converter is 95% at total output power of 539mW. Cross regulations of Boost1 and Boost2 are 3.57% and 4% each, when increasing twice times output current.

• Journal of applied mathematics & informatics
• /
• v.8 no.2
• /
• pp.531-537
• /
• 2001

In order for all participants at video conference to communicate mutually, the conference key should be necessary. In this paper, we present the communication protocol that generates a conference key efficiently based on $(\upsilon,\kappa,\lambda)$-configuration, one class of block designs, which minimizes message transmission overhead needed for this key. Especially, in the case of ${\lambda}=1$, the protocol requires only $O(\sqrt[v]{v})$ messages, where v is the number of participants.