• Food Science of Animal Resources
• /
• v.37 no.6
• /
• pp.898-905
• /
• 2017

Enhanced meat is defined as fresh meat that has been minimally processed to improve quality and consistency. The present work investigated the quality of enhanced pork loins manufactured with the extract of red perilla leaves (ERP). ERP was prepared by the aqueous extraction of red perilla leaves followed by lyophilization. Enhanced pork loins were produced by injecting brine (15% v/w). The treatments consisted of a control (brine containing no ERP), ERP 0.2 (brine containing ERP at a concentration of 2 g/kg of pork loin), and ERP 0.4 (brine containing ERP at a concentration of 4 g/kg of pork loin). The enhanced pork loins were stored at $4^{\circ}C$ for 7 d, and its quality parameters were investigated. Addition of ERP decreased the $L^*$-value and increased the $a^*$- and $b^*$-values of enhanced pork loins compared to those of the control group at all storage intervals (p<0.05). A significantly lower pH than that of the control was found in ERP 0.4 after 7 d of storage. The malondialdehyde contents of the cooked pork loins were significantly lower in ERP 0.2 and ERP 0.4 than in those of the control after 4 and 7 d of storage (p<0.05). While ERP 0.4 received relatively low scores in taste, flavor, and overall acceptability of the cooked pork loins (p<0.05), no significant differences were found between the control and ERP 0.2. Enhanced pork loins can be produced using ERP to improve their oxidative stability.

• Women's Health Nursing
• /
• v.3 no.2
• /
• pp.208-223
• /
• 1997

This study was made to suggest the nursing strategies for promoting the behaviors about bone mass health behaviors in order to prevent middle aged women's osteoporosis. This study was a descriptive-correlational design that also concerned to the types which improve bone mass promoting behaviors by inspecting patterns of health locus of control method out of recognizable variables of health improving models influencing on these bone mass promoting behaviors. For these purpose, data were collected by self reported questionnaire in middle school, from 158 women living in Seoul. The measuring tools used in this study about bone mass promoting behaviors and multidimensional health locus of control, were developed by author on the basis of literature review and analyzed by SPSS-PC window, into pearson's correlation, ANOVA, multiple regression, cluster analysis. Data was analyzed as follows. 1. 6 Multidimensional health locus of control scale clusters were existed. : a)cluster I (pure internal), b)cluster II(pure chance), c) cluster III(Believer in control), d), cluster IV(Type VI), e)cluster V(yea sayer), f) cluster VI(nay sayer). There were no findings of the powerful others external cluster and double external cluster. 2. The higher the value of internal health locus of control was, the better the bone mass promoting behaviors were(r=.2891, $p=.00^{**}$). The higher the value of chance external health locus of control was, the worse the bone mass promoting behaviors were(r=-.1367, $p=.00^{**}$). 3. On the basis of these relationships, 6 clusters were significantly different in the bone mass promoting behaviors(F=2.27, $p=.05^*$). The value of bone mass promoting behaviors was ranked the order of type VI>believer in control>pure internal>yea sayer>nay sayer>pure chance external highly. 4. Bone mass promoting behaviors were not significantly different as to age. Suggestion. Based on the results from the study, I would like to make some suggestions as follows. 1) To delay the loss of bone mass in middle aged women, the study on the cluster of the multidimensional health locus of control should be conducted repeatedly. 2) The tool of multidimensional health locus of control should be developed through a qualitative method adjusted on Korean' health culture.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.169-176
• /
• 2012

Based on our experience in developing resistive humidity sensor, interdigital gold electrodes with different fingers and gaps have been fabricated on a glass epoxy (GE) substrate using screen printing techniques. The basic structure of the electrode consisted of a 3-, 4- and 5-fingers with gaps of 310 and 460 ${\mu}m$. Gold electrode/GE was prepared by first printing silver nanopaste, followed by consecutive electroless plating of Cu, Ni and then Au. Copolymer of [2-(methacryloyloxy)ethyl] dimethyl benzyl ammonium chloride (MDBAC) and methyl methacrylate (MMA) was used as a humidity-sensing polyelectrolyte, which was fabricated by a screen printing method on the Au electrode/GE substrate. The flexible humidity sensor showed acceptable linearity between logarithmic impedance and relative humidity in the range of 20-95%RH, low hysteresis of 1.5%RH, good response and recovery time of 75 sec at 1 V, 1 kHz, and $25^{\circ}C$. Electrode construction had a significant influence on the humidity-sensing characteristics of polymeric humidity sensors. The activation energy between electrode and ion conducting polyelectrolyte plays an important role in explaining the differences of humidity sensing characteristics such as temperature dependence, sensitivity, linearity and hysteresis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.214-218
• /
• 2020

In this study, Mg_xZn_1-xO thin films, which can be applied not only to active layers of light-emitting devices (LEDs), such as UV-LEDs, but also to solar cells, high mobility field-effect transistors, and power semiconductor devices, are fabricated using the sol-gel method. ZnO and Mg_0.3Zn_0.7O solution synthesized by the sol-gel method and the thin film were grown by spin coating on a Si (100) substrate and sapphire substrate. The solutions are synthesized by dissolving precursor materials in 2-methoxyethanol (2-ME) solvent, and then monoethanolamine (MEA) was added to the mixed solution as a sol stabilizer. Zinc acetate dihydrate is used as a ZnO precursor, while Mg nitrate hexahydrate and Mg acetate tetrahydrate are used as an MgO precursor. Then, the optical and structural characteristics of the fabricated thin films are compared. The molar concentration of the Zn precursor in the solvent is fixed at 0.3 M, and the amount of the Mg precursor is 30% of Mg²⁺/Zn²⁺. The optical characteristics are measured using an UV-vis spectrophotometer, and the transmittance of each wavelength is measured. Structural characteristics are measured using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Composition analyses are performed using energy dispersive X-ray spectroscopy (EDS). The Mg_0.3Zn_0.7O thin film was well formed at the ratio of the Mg precursor added regardless of the type of Mg precursor, and the c-axis of the thin film was decreased, while the band gap was increased to 3.56 eV.

• Journal of Pharmacopuncture
• /
• v.9 no.2
• /
• pp.49-65
• /
• 2006

Objective : The purpose of this study is to investigate nucleotide sequence and extract cytotoxicity of Scolopendrae corpus. The nature and taste of Scolopendrae corpus is hot, Warm and toxic, and the effect of this is dispelling wind, anti-spasmodic action and detoxication so it has been used for C.V.A, facial palsy, sensory disorder at extremities, wounds and arthritis. Methods : Scolopendrae corpus were collected by locality on the market. They were morphologically classified. Their nucleotide sequence was investigated and compared among them. In addition, the water-alcohol extract cytotoxicity of them was studied by MTT-based cytotoxicity assay. Results : It was shown that the each Scolopendrae corpus by locality is almost identical at genetic result and is identified as Scolopendra subspinipes mutilans L. Koch. Nucleotide sequence of Scolopendra subspinipes mutilans L. Koch in this study will help to discriminate other species of Scolopendrae corpus. The water-alcohol extract of Scolopendra subspinipes mutilans L. Koch did not induce cytotoxicity on Hep G2, L929 cell and peritoneal macrophages. Besides, it did not influence nitrite production of peritoneal macrophages. These results can be used as basic data for genetic discrimination with another species of scolopendrae corpus.

• The Korean Journal of Pain
• /
• v.20 no.2
• /
• pp.116-122
• /
• 2007

Background: Lumbar zygapophysial joints are a common source of chronic lower back pain and radiofrequency thermocoagulation (RF) of the medial branches (MB) has been shown to be effective at providing substantial pain relief for chronic low back pain. Therefore, we carried out this study to determine the short term outcomes and prognostic factors of RF on the MB of patients with lumbar facet syndrome. Methods: We performed RF in fourteen patients who showed greater than 80% pain relief up to three times after a diagnostic MB block was conducted using 0.3 ml of 0.5% bupivacaine. Using 10 cm curved electrodes with 10-mm active tip, a 60 second, $80^{\circ}C$ lesion was made after electrical stimulation at 50 Hz for sensory and 2 Hz for motor nerve testing. The degree of pain relief was then assessed after 2 weeks, and again after 3 months using a visual analog scale (VAS) and a four point Likert scale. The outcome was regarded as 'success' if at least a 50% reduction in the VAS was observed. Possible prognostic factors between the two groups were also evaluated Results: The success rate was 71.4% (10/14) after three months of follow-up. However, there were transient complications, such as neuritis like syndrome, in 4 patients. In addition, short symptom duration and low minimal voltage (< 0.4 V) for sensory stimulation were shown to be the relevant prognostic factors for a successful outcome. Conclusions: RF may be an alternative to repeated MB block or intraarticular injection for palliation of lumbar facet syndrome. For better outcomes, early diagnosis and strict patient selection should be coupled with efforts to avoid anatomically incorrect RF.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.148-158
• /
• 1994

The purpose of this study was to compare the adaptation to tooth structure of light - cured glass ionomer cement with that of self -cured glass ionomer cement. In this study, class V cavities were prepared on the buccal surfaces of 10 extracted human premolar teeth, and teeth were randomly assigned 2 groups of 5 teeth each. The cavities of self-curing glass ionomer cement group were restored with the Fuji n. and the cavities of lightcuring glass ionomer cement group were restored with the Fuji II LC. The surfaces of glass ionomer cements were applied with All-Bond 2 adhesive, and cured with visible light. The restored teeth were stored in 100% relative humidity at $37^{\circ}C$ for 24 hours. And then. the roots of the teeth were removed with the tapered fissure bur and the remaining crowns were sectioned occlusogingivally through the center of glass ionomer restorations. Adaptation at tooth-restoration interface was assessed occlusally. axially, and gingivally by scanning electron microscope. The results were as follows : 1. On the occlusal margin, the group of self - curing glass ionomer cement showed closer adaptation to both enamel and dentin than the group of light-curing glass ionomer cement showing 5/lm gap between cement and tooth structure. 2. On the axial wall. the group of light-curing glass ionomer cement showing 5-$7{\mu}m$ gap between cement and dentin showed closer adaptation to dentin than the group of self -curing glass ionomer cement showing 10-$15{\mu}m$ gap between cement and dentin. 3. On the gingival margin, the group of light-curing glass ionomer cement showing 2-$5{\mu}m$ gap between cement and dentin(X 1200) showed closer adaptation to dentin than the group of self-curing glass ionomer cement showing 20pm gap between cement and dentin(X 600). 4. The group of self -curing glass ionomer cement showed closer adaptation on the occlusal margin than on the gingival margin, and the group of light-curing glass ionomer cement showed similar adaptation on both occlusal and gingival margins.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.277-283
• /
• 2005

LV transition curves for poly(ethylene-co-15.3 mol% octene) ($PEO_{15}$) and poly(ethylene- co-17.0 mol% octene) ($PEO_{17}$) were measured in cyclo-pentane and cyclo-hexane. Between $40{\sim}150^{\circ}C$, the LV curve for ($PEO_{15}$ + cyclo pentane) located $1.1{\sim}2.7$ bar higher than that for ($PEO_{17}$+ cyclo-pentane). In cyclo-hexane, similar behavior was observed for $PEO_{15}$ and $PEO_{17}$ solution except the pressure difference reduced to $0.9{\sim}l.6$ bar. If the backbone structure of $PEO_{15}$ were identical to that of $PEO_{17}$, the LV line for $PEO_{17}$ would locate at high pressures than that for $PEO_{15}$, since the number average molecular weight of $PEO_{17}$ (Ave. Mn=153,040) is 1.9 times higher 4han that of $PEO_{15}$ (Ave. Mn=82,200). The difference in the octene comonomer content between $PEO_{15}$ and $PEO_{17}$ is only 1.7 mole%, nevertheless this small difference in the backbone structure of the PEO greatly affected the location of the L-V curves in the mixtures comprised of PEO and cyclo-alkane.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.2
• /
• pp.103-109
• /
• 2022

In December 2019, the coronavirus disease 2019 (COVID-19) caused by the virus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) emerged in China and spread rapidly around the world, infecting millions of people. Cases of COVID-19 infection were observed to lead to viral pneumonia. Thirty-five patients admitted to the Gyeonggi Medical Center, South Korea, between November 2020 to January 2021, were found to have been infected with the influenza virus A and B, which cause symptoms similar to COVID-19. The records of these patients and those of COVID-19 patients who visited the hospital for medical examination were compared. The study patients included thirty patients with COVID-19 and/or influenza, five of those with influenza alone. A group of 121 patients without infection was used as control. Patients with COVID-19 and influenza had significantly higher lactate dehydrogenase levels than the patients with COVID-19 alone. The erythrocyte sedimentation rate (ESR) was higher in patients with COVID-19 alone than in other groups. Significant clinical outliers were observed in the COVID-19 and influenza infection group compared with the COVID-19 alone group. These results are expected to play an important role in the analysis of the hematological data of infected patients and the comparison of simultaneous and single infection data to determine clinical symptoms and other signs. These results may also assist in the development of vaccines and treatments for COVID-19.

• Progress in Medical Physics
• /
• v.17 no.4
• /
• pp.232-237
• /
• 2006

The aim of this study was to develop the calculation algorithm of source strength of Ir-192 source In terms of the absorbed dose to water instead of an apparent activity (Ci). For this work the Multi Purpose Brachytherapy Phantom(MPBP) was developed, which was designed to locate the source and the chamber precisely at a specific position Inside the water phantom. The reference point of measurement was set at the 5 cm distance along the transverse axis of the source. For a brachytherapy source calibration, the absorbed dose to water calibration factor ($N_{D.W.Q}$) of an lonization chamber were determined and then apply standard protocols of absorbed dose to water. The calibration factor ($N_{D.W.Q}$) of the ion chamber (TM30013, PTW, Germany) was determined using the EGSnrcCPP Monte Carlo Code. The calculated calibration factor ($N_{D.W.Q}$) was 5.28 cGy/nC. The calculated factor was then used to determine the absorbed dose to water from which the air kerma strength for an Ir-192 source can be easily derived at the reference point (5 cm). The calculated air kerma strength showed discrepancies of -0.6% to +1.8% relative to the air kerma strength provided by the vendor, In this work we demonstrated that the air kerma strength ($S_k$) could be determined from the absorbed dose to water calibration factor for Ir-192 source. In audition, this source calibration method could be applied directly to the dose Calculation formalism of AAPM report TG-43.