• Title/Summary/Keyword: V2C

Search Result 9,802, Processing Time 0.046 seconds

Effects of phase changes on mechanical properties of Ti-Nb alloys (Ti-Nb계 합금의 상변화가 기계적 성질에 미치는 영향)

  • Park, Hyo-Byeong
    • Journal of Technologic Dentistry
    • /
    • v.27 no.1
    • /
    • pp.9-17
    • /
    • 2005
  • The use of titanium alloys as biomaterials is increasing due to their superior biocompatibility and enhanced corrosion resistance compared to conventional stainless steels and cobalt-based alloys. Ti-6Al-4V ($\alpha+\beta$type) alloy instead of pure titanium ($\alpha$type) is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength and corrosion resistance. But it has been reported recently that the vanadium element expresses cytotoxicity and the aluminium element is related with dementia of Alzheimer type and neurotoxicity. In order to overcome their detrimental effects, $\beta$-phase stabilizer Nb was chosen in the present study. This paper was described the influence of phase changes of Ti-Nb alloys on mechanical properties. Ti-3wt.%Nb($\alpha$type),Ti-20wt.%Nb($\alpha+\beta$type) and Ti-40wt.%Nb($\beta$type) alloys were melted by vacuum arc furnace. The specimens were homogenized at 1050$^{\circ}C$ for 24hr and were then hot rolled to 50% reduction. Each alloys were solution heat treated at $\beta$ zone and $\alpha+\beta$ zone after homogenization and then were aged. The mechanical properties of Ti alloys were analysed by hardness test, tensile test, elongation test and SEM test. The results can be summarized as follows: 1) The higher hardness value of $\alpha+\beta$type alloy was obtained compared to the, $\alpha,\beta$type alloys. 2) The aged treated showed better hardness compared to the solution heat treated, homogenized. 3) In the case of solution and aging treatment at $\beta$region, the $\alpha+\beta$type alloy showed the most highest tensile strength and $\beta$type alloy showed the best elongation.

  • PDF

Source of the Variation in Meat and Bone Meal Nutritional Quality

  • Hendriks, W.H.;Cottam, Y.H.;Morel, P.C.H.;Thomas, D.V.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.17 no.1
    • /
    • pp.94-101
    • /
    • 2004
  • The gross composition, gross amino acid content, apparent ileal amino acid digestibility and apparent ileal digestible amino acid content from 64 commercially produced meat and bone meals were statistically analysed. The samples were produced by 22 plants over a 2.5 year period with eight plants using batch dry rendering and 14 plants using low temperature rendering. A linear model with method and time of year (period) as fixed effects, plant within method as a random effect and sheep percent as a covariate was fitted to the composition data. The majority of the variation in the gross composition, amino acid digestibility and digestible amino acid content was explained by differences between plants using the same method. Neither rendering season nor origin of the raw materials contributed significantly to the observed variation in meat and bone meal protein quality. Rendering method (low temperature or batch rendering) had a significant effect on the variation observed in gross fat content, gross energy content, pepsin nitrogen digestibility, protein solubility and total lanthionine content. The digestibility of a number of amino acids and the apparent digestible content of arginine, cysteine, aspartic acid, proline and hydroxyproline were also significantly affected by rendering method. On average, batch dry and low temperature rendering systems produce meat and bone meals of similar nutritional quality. The variation between plant and within plant, however, is large, indicating that purchasing meat and bone meal from the same plant does not guarantee a consistent quality.

A Study on the Pattern Distribution of Yin-Yang Ren [음양인] (Used on Questionnaire) (음양인 유형분류에 관한 연구 (설문지를 중심으로))

  • 이상범;최경미;박영배
    • The Journal of Korean Medicine
    • /
    • v.25 no.1
    • /
    • pp.1-20
    • /
    • 2004
  • Objectives : Based on the analysis of Yin-Yang[음양] characteristics and symptoms, each person is classified into Yin-Yang. Also the validity of the result is statistically analized. Methods : From Feb. to May. 2003, the data were collected through a questionnaire given to 690 patients. The questionnaire was composed of 34 items which were about personality, habit, sweat, response to coldness, thirst, bowel, urine, physical shape, and menstruation for women only. SD(Semantic Differential Technique) used for each item, each item is measured as a contrast of two opposite symptoms. Reliability analysis was used to select items and categories. Based on means of items in each category the Yin-Yang index was developed. The validity of Yin-Yang index was investigated using classification and clustering analysis. In statistical analysis, SPSS V10.0.7 PC was used. Results : The obtained results are summarized as follows: 1) We constructed Yin-Yang index based on the middle point of the sum of categorical means. Then we classified each person into Yin or Yang. 2) To investigate the validity of the distribution of personal Yin-Yang degree, the crosstabulation of results from clustering and classification was used. The hit ratio for classification was much higher than Maximum Chance Criterion($C_{max}$), and concurrence in crosstabulation was successful. Therefore we can infer that the distribution of Yin-Yang was valid. Conclusions : Based on Yin-Yang characteristics and symptoms, we was analyzed personal degree of Yin-Yang, and confirmed the validity of its distribution. Therefore this index can be used further for Bian-Zheng [변증] and classification of the constitution.

  • PDF

Application of Semi-continuous Ambient Aerosol Collection System for Elemental Analysis (대기입자의 원소성분 배출특성연구를 위한 반-연속식 입자채취시스템 적용)

  • Park, Seung-Shik;Ko, Jae-Min;Lee, Dong-Soo
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.28 no.1
    • /
    • pp.39-51
    • /
    • 2012
  • Aerosol slurry samples were collected in 60-min interval using Korean Semi-continuous Elements in Aerosol Sampler (KSEAS) between May 19 and June 6, 2010 at an urban site of Gwangju. The $PM_{2.5}$ samples were collected with a flow rate of 16.7 L/min and particles are grown by condensation of water vapor in a condenser maintained at ${\sim}5^{\circ}C$ after saturation by direct injection of steam. The resulting droplets are collected in a liquid slurry with a airdroplet separator. Concentrations of 16 elements (Al, Fe, Mn, Ca, K, Cu, Zn, Pb, Cd, Cr, Ti, V, Ni, Co, As, Se) in the collected slurry samples were determined off-line by ICP-MS. KSEAS sample analysis encompassed the sampling periods for which 24-hr average elemental species concentrations were calculated for comparison with those derived from 24-hr integrated filter samples. Relationship between elemental species measured by two methods indicated high correlation coefficients (r), mostly greater than r of 0.80. However, we note that concentrations of Al, K, Ca, Mn, and Fe, which are often associated with crustal elemental particles, in the KSEAS samples, were substantially lower (1.4~11 times) than those found in the typical filter-based samples. This discrepancy is probably due to difficulties in transferring insoluble dust particles to the collection vials in the KSEAS. Temporal profiles of elemental concentrations indicate that some transient events in their concentrations are observed over the sampling periods. For the elemental species studied, atmospheric concentrations during the transient events increased by factors of 4 in Mn~80 in Zn, compared to their background levels. Principle component analyses were applied to the hourly KSEAS data sets to identify sources affecting the concentrations of the metal constituents observed. In this study, we conclude that hourly measurements for particle-bound elemental constituents were extremely useful for revealing the short-term variability in their concentrations and developing insights into their sources.

Effect of Thermal Processing of Cereal Grain on the Performance of Crossbred Calves Fed Starters Containing Protein Sources of Varying Ruminal Degradability

  • Pattanaik, A.K.;Sastry, V.R.B.;Katiyar, R.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.13 no.9
    • /
    • pp.1239-1244
    • /
    • 2000
  • In order to investigate the effect of incorporation of thermally processed cereal (maize) grain and differently degradable protein sources in the calf starter, twenty four newly born crossbred $(Bos\;taurus{\times}Bos\;indicus)$ calves were assigned at random to six diets in a $3{\times}2$ factorial design involving three protein sources viz. groundnut meal (GN), cottonseed meal (CS) and meat and bone meal (MB), each along with two differently processed grain, namely ground raw (R) and pressure cooked (P) maize. The corresponding calf starters with green oats (Avena sativa) were given free-choice from 14 d onwards till the end of the 90 d experimental feeding. A restricted milk diet was fed till the age of weaning at 60 d. Total DM intake was not affected by cereal or protein sources. However, daily intake of DM (59.23 vs 66.45 g) and CP (12.38 vs 14.10 g) per kg $W^{0.75}$ was reduced (p<0.05) due to cereal processing. Better (p<0.05) feed and protein efficiencies after weaning and during entire period in calves fed processed maize resulted in a trend of higher $(p{\leq}092)$ growth rate especially when GN was the source of protein. In comparison among protein sources, calves fed MB diets tended to grow faster $(p{\leq}098)$ concurrent with a higher CP intake before weaning. It is thus evident that thermal processing of maize in the calf starter seems to improve calf performance. Moreover, results indicated that feeding of protein and starch sources of matching ruminal degradability may prove beneficial for early growth of crossbred calves.

Identification, Characterization and Phylogenic Analysis of Conserved Genes within the p74 Gene Region of Choristoneura fumiferana Granulovirus Genome

  • Rashidan, Kianoush Khajeh;Nassoury, Nasha;Giannopoulos, Paresa N.;Mauffette, Yves;Guertin, Claude
    • BMB Reports
    • /
    • v.37 no.6
    • /
    • pp.700-708
    • /
    • 2004
  • The genes located within the p74 gene region of the Choristoneura fumiferana granulovirus (ChfuGV) were identified by sequencing an 8.9 kb BamHI restriction fragment on the ChfuGV genome. The global guanine-cytosine (GC) content of this region of the genome was 33.02%. This paper presents the ORFs within the p74 gene region along with their transcriptional orientations. This region contains a total of 15 open reading frames (ORFs). Among those, 8 ORFs were found to be homologues to the baculoviral ORFs: Cf-i-p , Cf-vi, Cf-vii, Cf-viii (ubiquitin), Cf-xi (pp31), Cf-xii (lef-11), Cf-xiii (sod) and Cf-xv-p (p74). To date, no specific function has been assigned to the ORFs: Cf-i, Cf-ii, Cf-iii, Cf-iv, Cf-v, Cf-vi, Cf-vii, Cf-ix and Cf-x. The most noticeable ORFs located in this region of the ChfuGV genome were ubiquitin, lef-11, sod, fibrillin and p74. The phylogenetic trees (constructed using conceptual products of major conserved ORFs) and gene arrangement in this region were used to further examine the classification of the members of the granulovirus genus. Comparative studies demonstrated that ChfuGV along with the Cydia pomonella granulovirus (CpGV), Phthorimaea operculella granulovirus (PhopGV), Adoxophyes orana granulovirus (AoGV) and Cryptophlebia leucotreta granulovirus (ClGV) share a high degree of amino acids sequence and gene arrangement preservation within the studied region. These results support a previous report, which classified a granuloviruses into 2 distinct groups: Group I: ChfuGV, CpGV, PhopGV and AoGV and Group II: Xestia c-nigrum granulovirus (XcGV) and Plutella xylostella granulovirus (PxGV). The phylogenetic and gene arrangement studies also placed ClGV as a novel member of the Group I granuloviruses.

The Characteristics and Change of Colors on Fashion Collections in 1990s

  • Kim, Honey;Kim, Young-In
    • International Journal of Costume and Fashion
    • /
    • v.7 no.2
    • /
    • pp.18-31
    • /
    • 2007
  • The purpose of this study is to examine color characteristics and color changes of the fashion collections through 1990s, and to provide the efficient color information for color planning upon fashion themes. For this research, a total of 30,084 colors were collected from Paris, Milan, London, New York Collections in 1990s. Those colors were first measured by the Pantone Textile Color Specifier and COS Color System and spectrophotometer(color eye 580). These measured color values $L^{\ast}a^{\ast}b^{\ast}$of CIE were converted into H V/C of Munsell System, and 12 tones of PCCS with 5 achromatic colors. The characteristics of collected colors were analyzed in general and by place, season and year. The results of the study are as follows : First, the hues of purple blue, yellow red, red, yellow and the tones of grayish, pale, white, black, dark grayish, dull, light grayish appeared mostly. Yellow was shown quite frequently in spring/summer while purple, purple blue, red and yellow red in fall/winter. White, pale, light, light grayish and light gray were shown more frequently in spring/summer while Black, dark grayish, grayish, dark gray and dark in fall/winter. Second, the characteristics of colors by 4 representative places were similar to the general characteristics of colors in 1990's. Third, There were distributed widely Red, Yellow Red, Yellow in the early 1990s, Green Yellow, Green, Blue Green in the mid of 1990s, and Purple Blue, Purple in the late of 1990s. The distribution range of chromatic colors showed wide in both of the early of 1990s and the mid of 1990s for a while, and achromatic colors of grayish, gray and black appeared mostly in the late of 1900s.

고온고압처리에 따른 천연갈색다이아몬드의 광학특성분석

  • Seo, Jin-Gyo;An, Yong-Gil;Park, Jong-Wan
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.52-52
    • /
    • 2010
  • 본 연구에서 우리는 HPHT 처리 전 FT-IR spectrometer를 이용한 사전분석을 통해 type Ia brown 다이아몬드를 IaA, IaB, IaAB (A>B), IaAB (A=B), IaAB (A$1700-1800^{\circ}C$, 5 GPa에서 다이아몬드가 흑연화 되지 않는 범위 하에 HPHT처리를 시행하였다. 자외선-가시광선 분광분석기(UV-Vis Spectrometer, Shimadzu UV 3101PC)를 사용하여 350~800 nm에서의 가시광선 범위를 0.1nm의 분해능으로 투과(Transmittance) 모드로 측정하였고, 퓨리에 변환 적외선 분광분석기(FT-IR spectrometer, Jasco-4100)을 사용하여 $400{\sim}6000cm^{-1}$의 범위에서 $4cm^{-1}$ 의 분해능으로 흡수(Absorption) 모드로 측정한 후 HPHT 처리 전후를 비교 분석하였다. 또한 광루미네선스(Photoluminescence) 분석은 325 nm He-Cd laser를 광원으로 한(PL, Spectra-pro 2150i, Spectra-pro 2300i micro-spectrometer) 및 532 nm green laser를 광원으로 한(PL, SAS 2000)를 사용하여 각각 350~600 nm, 550~1100 nm의 범위에서 0.1nm step으로 측정하여 HPHT 처리전과 후를 비교 분석하였다. HPHT처리 후 모든 시료는 N3 center (415.4 nm), H4 center (496.4nm) 및 platelet와 연관된 ($1363\;cm^{-1}$)의 peak가 감소하였고, H3 center (503.2 nm)와 G-band가 증가하는 경향을 나타내었다. 또한 HPHT 처리 시 질소의 B집합보다 A집합이 더 감소하는 경향을 나타내었으며, A 또는 B집합의 파괴에서 발생된 질소 원자에 의해 질소의 interstitial center (594 nm)가 증가함을 알 수 있었다. HPHT 처리 후 모든 시료는 (N-V)- center가 생성됨을 확인 할 수 있었다. 결론적으로 본 연구를 통해 HPHT 처리를 통해 다이아몬드 내에 존재하는 질소결합관련 상태의 변화를 확인할 수 있었다.

  • PDF

Comparison of Passivation Property on Hydrogenated Silicon Nitrides whose Antireflection Properties are Identical (반사방지 특성을 통일시킨 실리콘 질화막 간의 패시베이션 특성 비교)

  • Kim, Jae Eun;Lee, Kyung Dong;Kang, Yoonmook;Lee, Hae-Seok;Kim, Donghwan
    • Korean Journal of Materials Research
    • /
    • v.26 no.1
    • /
    • pp.47-53
    • /
    • 2016
  • Silicon nitride ($SiN_x:H$) films made by plasma enhanced chemical vapor deposition (PECVD) are generally used as antireflection layers and passivation layers on solar cells. In this study, we investigated the properties of silicon nitride ($SiN_x:H$) films made by PECVD. The passivation properties of $SiN_x:H$ are focused on by making the antireflection properties identical. To make equivalent optical properties of silicon nitride films, the refractive index and thickness of the films are fixed at 2.0 and 90 nm, respectively. This limit makes it easier to evaluate silicon nitride film as a passivation layer in realistic application situations. Next, the effects of the mixture ratio of the process gases with silane ($SiH_4$) and ammonia ($NH_3$) on the passivation qualities of silicon nitride film are evaluated. The absorption coefficient of each film was evaluated by spectrometric ellipsometry, the minority carrier lifetimes were evaluated by quasi-steady-state photo-conductance (QSSPC) measurement. The optical properties were obtained using a UV-visible spectrophotometer. The interface properties were determined by capacitance-voltage (C-V) measurement and the film components were identified by Fourier transform infrared spectroscopy (FT-IR) and Rutherford backscattering spectroscopy detection (RBS) - elastic recoil detection (ERD). In hydrogen passivation, gas ratios of 1:1 and 1:3 show the best surface passivation property among the samples.

Resistive Switching Behavior of Cr-Doped SrZrO3 Perovskite Thin Films by Oxygen Pressure Change (산소 분압의 변화에 따른 Cr-Doped SrZrO3 페로브스카이트 박막의 저항변화 특성)

  • Yang, Min-Kyu;Park, Jae-Wan;Lee, Jeon-Kook
    • Korean Journal of Materials Research
    • /
    • v.20 no.5
    • /
    • pp.257-261
    • /
    • 2010
  • A non-volatile resistive random access memory (RRAM) device with a Cr-doped $SrZrO_3/SrRuO_3$ bottom electrode heterostructure was fabricated on $SrTiO_3$ substrates using pulsed laser deposition. During the deposition process, the substrate temperature was $650^{\circ}C$ and the variable ambient oxygen pressure had a range of 50-250 mTorr. The sensitive dependences of the film structure on the processing oxygen pressure are important in controlling the bistable resistive switching of the Cr-doped $SrZrO_3$ film. Therefore, oxygen pressure plays a crucial role in determining electrical properties and film growth characteristics such as various microstructural defects and crystallization. Inside, the microstructure and crystallinity of the Cr-doped $SrZrO_3$ film by oxygen pressure were strong effects on the set, reset switching voltage of the Cr-doped $SrZrO_3$. The bistable switching is related to the defects and controls their number and structure. Therefore, the relation of defects generated and resistive switching behavior by oxygen pressure change will be discussed. We found that deposition conditions and ambient oxygen pressure highly affect the switching behavior. It is suggested that the interface between the top electrode and Cr-doped $SrZrO_3$ perovskite plays an important role in the resistive switching behavior. From I-V characteristics, a typical ON state resistance of $100-200\;{\Omega}$ and a typical OFF state resistance of $1-2\;k{\Omega}$, were observed. These transition metal-doped perovskite thin films can be used for memory device applications due to their high ON/OFF ratio, simple device structure, and non-volatility.