• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.375-383
• /
• 2005

An experiment was conducted to study the protective role of polyherbal feed supplement (Growell) during induced mycotoxicosis in broilers. A total of 240 Vencobb broilers were divided at day old stage into eight equal groups. Group A served as control and was given plain feed, group B, D, F and H were given Growell at 0.35 g/kg of feed. Group C, D, G and H were given dietary aflatoxin $B_1$ at 0.2 ppm and groups E, F, G and H were given ochratoxin A at 0.2 ppm in feed to study effect of Growell on individual aflatoxicosis, ochratoxicosis and combined mycotoxicosis of broilers. The chicks were given their respective feeds from 1st day to 6th week of age and were vaccinated at 7th and 28th day of age with Lasota strain of Newcastle disease virus. There was no statistically significant effect of mycotoxins individually or in combination on body weight of broilers. However, body weights were highest in group B and lowest in co-mycotoxicated group G. Feed conversion ratio was best in group B followed by A, D, F, E, H and G. Significant improvement in haemoglobin values was observed in broilers due to feeding of Growell in ochratoxin and co-mycotoxicated groups. There was no significant effect of mycotoxin treatment on PCV, TEC and TLC of broilers. Due to single and combined mycotoxicosis, there was reduction in serum total protein, albumin, cholesterol and triglyceride and rise in alkaline phosphatase, creatinine and uric acid levels. Supplementation of diets with Growell reduced the alterations induced due to mycotoxins. There was a significant rise in per cent organ weight of liver and reduction of that of spleen, bursa of Fabricius and thymus of broilers fed mycotoxins. Protection from alteration in per cent organ weight of these organ by supplementation of Growell was recorded. The observed impaired immune response and histopathological changes in liver, kidney, spleen, bursa of Fabricius and thymus of broilers given mycotoxins were protected by supplementation of Growell.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.581-590
• /
• 2016

Resistance to anoikis, a cell-detachment induced apoptosis, is one of the malignant phenotypes which support tumor metastasis. Molecular mechanisms underlying the establishment of this phenotype require further investigation. This study aimed at exploring protein expression profiles associated with anoikis resistance of a metastatic breast cancer cell. Cell survival of suspension cultures of non-metastatic MCF-7 and metastatic MDA-MB-231 cells were compared with their adherent cultures. Trypan blue exclusion assays demonstrated a significantly higher percentage of viable cells in MDA-MB-231 than MCF-7 cell cultures, consistent with analysis of annexin V-7-AAD stained cells indicating that MDA-MB-231 possess anti-apoptotic ability 1.7 fold higher than MCF-7 cells. GeLC-MS/MS analysis of protein lysates of MDA-MB-231 and MCF-7 cells grown under both culture conditions identified 925 proteins which are differentially expressed, 54 of which were expressed only in suspended and adherent MDA-MB-231 but not in MCF-7 cells. These proteins have been implicated in various cellular processes, including DNA replication and repair, transcription, translation, protein modification, cytoskeleton, transport and cell signaling. Analysis based on the STITCH database predicted the interaction of phospholipases, PLC and PLD, and 14-3-3 beta/alpha, YWHAB, with the intrinsic and extrinsic apoptotic signaling network, suggesting putative roles in controlling anti-anoikis ability. MDA-MB-231 cells grown in the presence of inhibitors of phospholipase C, U73122, and phospholipase D, FIPI, demonstrated reduced ability to survive in suspension culture, indicating functional roles of PLC and PLD in the process of anti-anoikis. Our study identified intracellular mediators potentially associated with establishment of anoikis resistance of metastatic cells. These proteins require further clarification as prognostic and therapeutic targets for advanced breast cancer.

• Korean Journal of Materials Research
• /
• v.20 no.7
• /
• pp.374-378
• /
• 2010

$MgTiO_3$ thin films were prepared by r.f. magnetron sputtering in order to prepare miniaturized NPO type MLCCs. $MgTiO_3$ films showed a polycrystalline structure of ilmenite characterized by the appearance of (110) and (202) peaks. The intensity of the peaks decreased with an increase in the chamber pressure due to the decrease of crystallinity which resulted from the decrease of kinetic energy of the sputtered atoms. The films annealed at $600^{\circ}C$ for 60min. showed a fine grained microstructure without micro-cracks. The grain size and roughness of the $MgTiO_3$ films decreased with the increase of chamber pressure. The average surface roughness was 1.425~0.313 nm for $MgTiO_3$ films prepared at 10~70 mTorr. $MgTiO_3$ films showed a dielectric constant of 17~19.7 and a dissipation factor of 2.1~4.9% at 1MHz. The dielectric constant of the films is similar to that of bulk ceramics. The dielectric constant and the dissipation factor decreased with the increase of the chamber pressure due to the decrease of grain size and crystallinity. The leakage current density was $10^{-5}\sim10^{-7}A/cm^2$ at 200kV/cm and this value decreased with the increase of the chamber pressure. The small grain size and smooth surface microstructure of the films deposited at high chamber pressure resulted in a low leakage current density. $MgTiO_3$ films showed a near zero temperature coefficient and satisfied the specifications for NPO type materials. The dielectric properties of the $MgTiO_3$ thin films prepared by sputtering suggest the feasibility of their application for MLCCs.

• Macromolecular Research
• /
• v.13 no.2
• /
• pp.120-127
• /
• 2005

Conventional poly(methyl methacrylate) (PMMA) bone cement has been widely used as an useful biopolymeric material to fix bone using artificial prostheses. However, many patients had to be reoperated, due to the poor mechanical and thermal properties of conventional PMMA bone cement, which are derived from the presence of unreacted MMA liquid, the shrinkage and bubble formation that occur during the curing process of the bone cement, and the high curing temperature ($above 100^{\circ}C$) which has to be used. In the present study, a composite PMMA bone cement was prepared by impregnating conventional PMMA bone cement with ultra high molecular weight polyethylene (UHMWPE) powder, in order to improve its mechanical and thermal properties. The UHMWPE powder has poor adhesion with other biopolymeric materials due to the inertness of the powder surface. Therefore, the surface of the UHMWPE powder was modified with two kinds of silane coupling agent containing amino groups (3-amino propyltriethoxysilane ($TSL 8331^{R}$) and N-(2-aminoethyl)-3-(amino propyltrimethoxysilane) ($TSL 8340^{R}$)), in order to improve its bonding strength with the conventional PMMA bone cement. The tensile strengths of the composite PMMA bone cements containing $3 wt\%$ of the UHMWPE powder surface-modified with various ratios of $TSL 8331^{R}$ and $TSL 8340^{R}$ were similar or a little higher than that of the conventional PMMA bone cement. However, no significant difference in the tensile strengths between the conventional PMMA bone cement and the composite PMMA bone cements could be found. However, the curing temperatures of the composite PMMA bone cements were significantly decreased.

• Journal of Acupuncture Research
• /
• v.15 no.2
• /
• pp.117-133
• /
• 1998

The purpose of this morphological study was to investigate the relationship to facial nerve and LI4 related to the large intestine meridian. The common locations of the spinal cord and brain projecting to the LI4 and facial nerve were observed fallowing injection of transsynaptic neurotropic virus, pseudorabis virus(PRV), into the LI4 and facial nerve of the rat. After survival times of 96 hours following injection of PRV, the rats were perfused, and their spinal cord and brain were frozen sectioned(30${\mu}m$). These sections were stained by PRV immunohistochemical staining method, and observed with light microscope The results were as follows: 1. The PRV labeled spinal cord segments projecting to the LI4 and facial nerve were founded in cervical, thoracic, lumbar and sacral segments. Dense labeled areas of each spinal cord segment were founded in lamina IV, V, X, lateral spinal nucleus, intermediolateral nucleus and dorsal nucleus. 2. The PRV labeled medulla oblongata projecting to the LI4 and facial nerve were founded in the A1 noradrenalin cells/C1 adrenalin cells/caudoventrolateral reticular nucleus, rostroventrolateral reticular nucleus, medullary reticular nucleus, nucleus tractus solitarius, raphe obscurus nucleus, raphe pallidus nucleus, raphe magnus nucleus, gigantocellular nucleus, lateral paragigantocellular nucleus, and spinal trigeminal nucleus.

• Corrosion Science and Technology
• /
• v.12 no.6
• /
• pp.274-279
• /
• 2013

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. During the FAC, a protective oxide layer on carbon steel dissolves into flowing water leading to a thinning of the oxide layer and accelerating corrosion of base material. As a result, severe failures may occur in the piping and equipment of NPPs. Effect of alloying elements on FAC of pipe materials was studied with rotating cylinder FAC test facility at $150^{\circ}C$ and at flow velocity of 4m/s. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO) and temperature. Test solution was the demineralized water, and DO concentration was less than 1 ppb. Surface appearance of A 106 Gr. B which is used widely in secondary pipe in NPPs showed orange peel appearance, typical appearance of FAC. The materials with Cr content higher than 0.17wt.% showed pit. The pit is thought to early degradation mode of FAC. The corrosion product within the pit was enriched with Cr, Mo, Cu, Ni and S. But S was not detected in SA336 F22V with 2.25wt.% Cr. The enrichment of Cr and Mo seemed to be related with low, solubility of Cr and Mo compared to Fe. Measured FAC rate was compared with Ducreaux's relationship and showed slightly lower FAC rate than Ducreaux's relationship.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.396-399
• /
• 2008

In this study, the electric field distributions have been investigated by simulation in accordance with the various shapes of ITO-electrodes. Also we have measured the density of excited Xe atoms in the 1s5 state in discharge cell, where the gap distance of 60 um, gas pressure of 400 Torr, Xe contents of 7%, and sustaining voltage of 200 V are kept in this experiment. The maximum density of excited Xe atoms in the 1s5 state in a discharge cell for the fish-boned, T shaped and squared ITO electrodes have been measured to be $3.01\;{\times}\;10^{13}\;cm^{-3}$, $2.66\;{\times}\;10^{13}\;cm^{-3}$ and $2.06\;{\times}\;10^{13}\;cm^{-3}$, respectively. It is shown that the electric field distribution with different ITO Electrodes is essential factor for these maximum density of excited Xe atoms in discharge cell.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.5-18
• /
• 1996

The solid state cesium ion source os alumino-silicate based zeolite which contains cerium. The material is an ionic conductor. Cesiums are stably stored in the material and one can extract the cesiums by applying electric field across the electrolyte. Cesium ion bombardment has the unique property of producing high negative ion yield. This ion source is used as the primary source for the production of a negative ion without any gas discharge or the need for a carrier gas. The deposition of materials as an ionic species in the energy range of 1.0 to 300eV is recently recognized as a very promising new thin film technique. This energetic non-thermal equilibrium deposition process produces films by “Kinetic Bonding / Energetic Condensation" mechansim not governed by the common place thermo-mechanical reaction. Under these highly non-equilibrium conditions meta-stable materials are realized and the negative ion is considered to be an optimum paeticle or tool for the purpose. This process differs fundamentally from the conventional ion beam assisted deposition (IBAD) technique such that the ion beam energy transfer to the deposition process is directly coupled the process. Since cesium ion beam sputter deposition process is forming materials with high kinetic energy of metal ion beams, the process provider following unique advantages:(1) to synthesize non thermal-equilibrium materials, (2) to form materials at lower processing temperature than used for conventional chemical of physical vapor deposition, (3) to deposit very uniform, dense, and good adhesive films (4) to make higher doposition rate, (5) to control the ion flux and ion energy independently. Solid state cesium ion beam sputter deposition system has been developed. This source is capable of producing variety of metal ion beams such as C, Si, W, Ta, Mo, Al, Au, Ag, Cr etc. Using this deposition system, several researches have been performed. (1) To produce superior quality amorphous diamond films (2) to produce carbon nitirde hard coatings(Carbon nitride is a new material whose hardness is comparable to the diamond and also has a very high thermal stability.) (3) to produce cesiated amorphous diamond thin film coated Si surface exhibiting negative electron affinity characteristics. In this presentation, the principles of solid state cesium ion beam sputter deposition and several applications of negative metal ion source will be introduced.

• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.211-212
• /
• 2007

Stroke makes several physical deficits. Dysarthria is one of the most difficult problems in conventional medicine because of the weakness of neuromotor control. The purpose of this study is to find the acoustic characteristics of acupuncture therapy effects on post-stroke dysarthria. Seven patients with stroke(infarction or hemorrhage) were selected by CT or MR imaging. The authors applied acupuncture therapy by inserting needles into 8 acupuncture points, ipsilateral ST4, ST6 and contralateral LI4, ST36 on facial palsy side, and CV23, CV24, bilateral "Sheyu" for 4 weeks. Speech sample were composed of five simple vowels /a,e,i,o,u/ and meaningless polysyllabic words CVCVC(C: stops, affricated, fricative sounds, v: /e/). .VOT, total duration of each speech samples and vowel formant (F1&F2) were analyzed on Spectrogram. The results are as follows: 1. VOT of bilabial and velar stops was decreased post treatment. The VOT of bilabial glottalized pre and post treatment were statistically significant (p < 0.05). 2. Total duration of polysyllabic words was decreased post treatment. Decrement of total duration containing the bilabial was statistically significant (p<0.05). 3. First formant of round vowel /o/ pre and post treatment was statistically significant (p<0.05).

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.638-643
• /
• 1996

The efficiency of dewatering of soybean milk residue was improved by hydraulic pressing after pH adjustment to 4.5 with organic acids such as acetic and lactic acids. Water content of raw soybean milk residue was reduced from 80% to 72% by pressing after pH adjustment, while only to 78% by the conventional hydraulic press. The water content of the residue after pH adjustment was further reduced to 63% by hydraulic pressing with ohmic heating. The pH adjustment facilitated separation of cake from the filter cloth and reduced the solid content of the expressed liquid from 10 to 3%.