• Journal of Life Science
• /
• v.27 no.10
• /
• pp.1161-1167
• /
• 2017

In order to find a new antimicrobial bacterium, we performed screening for antimicrobial activity of bacteria isolated from the eggs of a sea hare. The newly identified strain was designated as Phaeobacter inhibens KJ-2, based on the biochemical characterization and 16S rRNA gene sequence analysis. A colony of P. inhibens KJ-2 showed a circular and ruler-like smooth form at the edge, and a brown color. However, when maintained with a longer incubation time, its coloring was transformed into dark brown. From the result of SEM, P. inhibens KJ-2 is a bacillus which has a length of $0.8{\sim}1.0{\mu}m$ and a width of $0.4{\sim}0.6{\mu}m$. The optimal growth and antimicrobial activity were observed by shaking the culture for 24 hr at $20^{\circ}C$, which showed potent activity against pathogenic bacteria including Vibrio logei, Vibrio campbellii, Vibrio mimicus, Vibrio vulnificus, and Vibrio salmonicida. The antimicrobial activity was proportional to the amount of produced acylated homoserine lactones (AHLs). Therefore, we suggest that production of antimicrobial materials from P. inhibens KJ-2 is regulated by Quorum sensing (QS).

• Archives of Pharmacal Research
• /
• v.26 no.7
• /
• pp.564-568
• /
• 2003

Pharmacokinetic and pharmacodynamic properties of gliclazide were studied after an oral administration of gliclazide tablets in healthy volunteers. After an overnight fasting, gliclazide tablet was orally administered to 11 volunteers; Additional 10 volunteers were used as a control group (i.e., no gliclazide administration). Blood samples were collected, and the concentration determined for gliclazide and glucose up to 24 after the administration. Standard pharmacokinetic analysis was carried out for gliclazide. Pharmacodynamic activity of the drug was expressed by increase of glucose concentration ($\Delta$PG), by area under the increase of glucose concentration-time curve ($AUC_{$\Delta$PG}$) or by the difference in increase of glucose concentration ($D_{$\Delta$PG}$) at each time between groups with and without gliclazide administration. Pharmacokinetic analysis revealed that $C_{max}, T_{max}$, CL/F (apparent clearance), V/F (apparent volume of distribution) and half-life of gliclazide were $4.69\pm1.38 mg/L, 3.45\pm1.11 h, 1.26\pm0.35 L/h, 17.78\pm5.27 L, and 9.99\pm2.15 h$, respectively. When compared with the no drug administration group, gliclazide decreased significantly the $AUC_{$\Delta$PG}$ s at 1, 1.5, 2, 2.5, 3 and 4 h (p＜0.05). The $\Delta$PGs were positively correlated with $AUC_{gliclazide}$ at 1 and 1.5 h (p＜0.05), and the correlation coefficient was maximum at 1 h (r = 0.642) and gradually decreased at 4 h after the administration. The $AUC_{$\Delta$PG}$s were positively correlated with $AUC_{gliclazide}$ at 1, 2, 3 and 4 h (p＜0.05), and the maximum correlation coefficient was obtained at 2 h (r=0.642) after the administration. The $D_{$\Delta$PG}$ reached the maximum at 1 h, remained constant from 1 h to 3 h, and decreased afterwards. Therefore, these observations indicated that maximum hypoglycemic effect of gliclazide was reached at approximately at 1.5 h after the administration and the effect decreased, probably because of the homeostasis mechanism, in health volunteers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.351-352
• /
• 2012

UV LED에서 p-GaN층의 높은 일함수와 자체 면저항이 크기 때문에 current spreading layer인 ITO (indium tin oxide) 투명전극이 사용되고 있다. 따라서 높은 UV 파장대 투과율과 낮은 면 저항이 매우 중요하다. 본 연구에서, RF magnetron sputter를 사용하여 ITO 투명전극을 glass(boro33)에 120 nm 두께로 증착하였다. 그 후 RTA (rapid thermal annealing)을 이용해 120초 동안 $600^{\circ}C$에서 Air, $N_2$ (15 sccm), vacuum 환경에서 열처리를 하여 UV-Vis-NIR spectrophotometer를 사용해 ITO 박막의 투과율을 측정하고, Hall measurement system을 이용하여 전기적 특성을 측정하였다. Fig. 1과 같이 열처리 환경에 따라 ITO 박막의 투과율이 변하고 또한 Table 1과 같이 전기적 특성도 변함을 알 수 있었다. Air 환경에서의 열처리는 reference 샘플과 비교 했을 때 400 nm 이하의 파장에서 투과율이 증가하였지만 400 nm 이상의 파장에서는 투과율이 낮아짐을 볼 수 있고, 면 저항 (Ohm/sq)은 오히려 reference (as deposited) 샘플과 비교하여 24 Ohm/sq 증가하는 것을 알 수 있었다. 반면에 $N_2$, vacuum 환경에서 열처리는 reference (as deposited) 샘플 보다 380 nm 파장대에서 16% 정도 높은 투과율을 보였고, 면저항 역시 2배 이상 낮아졌다. 둘 다 비슷한 투과율과 면저항을 나타내었지만 vacuum 환경이 좀 더 우수한 광학적 특성을 나타내었고 반면에 $N_2$ 환경은 좀 더 낮은 면저항을 나타내었다. ITO 박막을 증착한 후 vacuum 환경에서 열처리를 통하여 제작된 UV-LED (중심 파장 380 nm)가 Fig. 2와 같이 입력 전류 450 mA에서 광출력이 46% 정도 향상 되었고 안정된 I-V 특성 보였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.73-82
• /
• 2012

The main and side reactions of the three selective catalytic reduction (SCR) reactions with ammonia over a vanadium-based catalyst have been investigated using synthetic gas mixtures in the temperature range of $170{\sim}590^{\circ}C$. The three SCR reactions are standard SCR with pure NO, fast SCR with an equimolar mixture of NO and $NO_2$, and $NO_2$ SCR with pure $NO_2$. Vanadium based catalyst has no significant activity in NO oxidation to $NO_2$, while it has high activity for $NO_2$ decomposition at high temperatures. The selective catalytic oxidation of ammonia and the formation of nitrous oxide compete with the SCR reactions at the high temperatures. Water strongly inhibits the selective catalytic oxidation of ammonia and the formation of nitrous oxide, thus increasing the selectivity of the SCR reactions. However, the presence of water inhibits the SCR activity, most pronounced at low temperatures. In this study, the experimental results are analyzed by means of a dynamic one-dimensional isothermal heterogeneous plug-flow reactor (PFR) model according to the Eley-Rideal mechanism.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.20.2-20.2
• /
• 2011

BMNO dielectric materials with a pyrochlore structure have been chosen and they have quite high dielectric constants about 210 for the bulk material. In the case of thin films, 200-nm-thick BMNO films deposited at room temperature showed a low leakage current density of about $10^{-8}\;A/cm^2$ at 3 V and a dielectric constant of about 45 at 100 kHz. Because high dielectric constant BMNO thin films kept an amorphous phase at a high temperature above $900^{\circ}C$. High dielectric constant BMNO thin films grown at room temperature have many applications for flexible electronic devices. However, because the dielectric constant of the BMNO films deposited at room temperature is still low, percolative BMNO films (i.e., those were grown in a pure argon atmosphere) sandwiched between ultra-thin BMNO films grown in an oxygen and argon mixture have greater dielectric constants than standard BMNO films. However, they still showed a leakage problem at a high voltage application. Accordingly, a new nano-structure that uses BMNO was required to construct the films with a dielectric constant higher than that of its bulk material. The fundamental reason that the BMNO-Bi nano-composite films grown by RF-Sputtering deposition had a dielectric constant higher than that of the bulk material was addressed in the present study. Also we used the graphene as bottom electrode instead of the Cu bottom electrode. At first, we got the high leakage current density value relatively. but through this experiment, we could get improved leakage current density value.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.7
• /
• pp.532-536
• /
• 2011

The silicon nitride films were prepared by chemical vapor deposition using inductively coupled plasma. During the deposition, the substrate was heated at $150^{\circ}C$ and power 1,000 W. To evolution low temperature manufacture, we have studied the role of source gases, $SiH_4$, $NH_3$, $N_2$, and $H_2$, to produce Si-N and N-H bond in a-SiNx:H film growth. $SiH_4$, $NH_3$, and $N_2$ flow rate fixed at 100, 10, and 10 sccm, $H_2$ flow rate varied from 0 to 10 sccm by small scale. To get the electrical characteristics, we makes MIM structure, and analysis surface bonding state. Experimental data show that Si-N and N-H bond is increased and hence electrical characteristics is showed 3 MV/cm breakdown-voltage, and leakage-current $10^{-7}\;A/cm^2$.

• Childhood Kidney Diseases
• /
• v.9 no.2
• /
• pp.269-274
• /
• 2005

Nephrogenic diabetes insipidus(NBI) is characterized by an inability to concentrate urine despite normal or elevated plasma concentrations of the antidiuretic hormone; arginine vasopressin(AVP). Polyuria with hyposthenuria, and polydipsia are the cardinal clinical manifestations of the disease. Ninety percent of congenital nephrogenic diabetes insipidus patients are males with the X-linked recessive form of the disease; the mutation is in the AVP receptor 2 gene(AVPR2), which is located in chromosomal region Xq28. We report a case of NDI who suffered from unexplained fever and failure to thrive, which has been recognized since about ,3 months after birth. His genomic DNA analysis identified a novel AVPR2 gene mutation as W200C. (J Korean Soc Pediatr Nephrol 2005;9:269-274)

• Journal of Sericultural and Entomological Science
• /
• v.18 no.1
• /
• pp.27-39
• /
• 1976

In this study several kinds of spun silk yarn-synthetic filament compounded yarn was manufactured, and several fabrics woven from above mentioned silk compound yarn for evaluation of serviceability as clothing materials. The following results were obtained: 1. Degumming agents are in the order of sodium silicate, sodium hydroxide, sodium carbornate, soap and water. 2. When the concentration of sodium hydroxide is exceeded 3%, degradation of floss silk property is resulted because of excessive dissolving out of silk protein. 3. Degumming effect is much improved by concentration of degumming agent and less by its treating time. 4. Simultaneous application of more the 2 kinds of degumming agent is desirable for improvement of floss silk. 5. Application of natural organic acid brings very good results in keeping original scooping and color of the silk. 6. Load and elongation it increased by compound with synthetic filament yarn. 7. Even the evenness of compound yarn is largely dependent on the quality of floss silk and extent of degumming, the C.V.% of silk compound yarn in the experiment was 8-12%. 8. Single bath dyeing technique was impossible for their cloth, and dyeing was performed in 2 bath system separately for silk and synthetic fiber. 9. Shrinkage ratio due to the dyeing of fabric was 23% in case of polyester and spun silk fabric. 10. The final woven cloth can be applicable to (a) Blouse in care of thin cloth (compound silk fabric) (b) Korean costume for women in case of thick cloth. (compound hand spun silk fabric)

• Journal of Microbiology and Biotechnology
• /
• v.12 no.6
• /
• pp.972-978
• /
• 2002

Streptomyces sp. AD001 is a Gram-positive soil actinomycetes secreting an uncharacterized 2,4-dichlorophenol (DCP) oxidizing enzyme, whose activity is similar to the previously known Actinomycetes lignin-peroxidase (ALiP). This extracellular peroxidase was purified from Streptomyces sp. AD001 as a single protein band on an SDS-PACE by ammonium sulfate fractionation, Q-sepharose, concanavalin A, and Bio-Gel HTP column chromatographies. The molecular mass of the purified peroxidase was determined by SDS-PAGE to be 45.2 kDa, and 49.7 kDa with MALDI-TOF-MS, respectively. The highest level of peroxidase activity was observed at pH 7.5 and $30^{\circ}C$. The amino terminal sequence of the purified peroxidase (G-E-P-E-E-G-N-V-D-G-T-L) showed no significant homologies to my known proteins, suggesting that Streptomyces sp. AD001 may secrete a novel kind of bacterial peroxidase Initial rate kinetic data of the 2,4-DCP oxidation were best modeled with a random-binding bireactant system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E1
• /
• pp.1-7
• /
• 2001

The elemental characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The aerosol particles were samples at 12 individual size ranges between 0.01 and 30㎛. Collected aerosol particles were separated into both soluble and insoluble components. The concentrations of 15 elements in both components were determined by a PIXE analysis using a 2.0 MeV-proton beam. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The maximum rations of S in July and December were 5.5 and 3.8 %, and they appeared in the size range of 0.47∼1.17㎛(stage No. 6 or 7) . The ratios of a S at non-separated size were 3.1 and 2.2 % in July and December, respectively, On the other hand, the maximum rations of Si in July and December were 7.0 and 5.4% and they appeared in the size range of 5.1∼30㎛(stage No. 0∼2). The ratios of Si at the non-separated size were 2.1 and 1.8% in July and December, respectively, The mass diameter of 12 elements ranged between 0.59㎛ of S and 3.20 of Fe. More than 90% of atmospheric aerosols consisted of the light elements such as C, N, O, H and Al. The soluble component was dominant in the smaller size range and the insoluble component in the larger size range. Large portions of Si. Ti and Fe existed in insoluble state. By contrast, S, Cl, Ca, Zn and Br were dissolved in water.