• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.501-504
• /
• 2003

In this paper, for enhancement of property on a-Si:H TFTs We measure interface characteristics of ferroelectrics thin film and a-Si:H thin film. First, SrTiO$_3$ thin film is deposited bye-beam evaporation. Deposited films are annealed for 1 hour in N2 ambient at 150$^{\circ}C$ ∼ 600$^{\circ}C$. Dielectric characteristics of deposited SrTiO$_3$ films are very good because dielectric constant shows 50∼100 and breakdown electric field are 1∼1.5MV/cm. a-SiN:H,a-Si:H(n-type a-Si:H) are deposited onto SrTiO$_3$ film to make MFNS(Metal/ferroelectric/a-SiN:H/a-Si:H) by PECVD. After the C-V measurement for interface characteristics, MFNS structure shows no difference with MNS(Metal/a-SiN:H/a-Si:H) structure in C-V characteristics but the insulator capacitance value of MFNS structure is much higher than the MNS because of high dielectric constant of ferroelectrics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.468-473
• /
• 2003

In this paper, for enhancement of property on a-Si:H TFTs We measure interface characteristics of ferroelectrics thin film and a-Si:H thin film. First, SrTiO$_3$ thin film is deposited bye-beam evaporation. Deposited films are annealed for 1 hour in N2 ambient at $150^{\circ}C∼600^{\circ}C$. Dielectric characteristics of deposited SrTiO$_3$ films are very good because dielectric constant shows 50∼100 and breakdown electric field are 1 ∼ 1.5 MV/cm. a-SiN:H,a-Si:H(n-type a-Si:H) are deposited onto SrTiO$_3$ film to make MFNS(Meta1/ferroelectric/a-SiN:H/a-Si:H) by PECVD. After the C-V measurement for interface characteristics, MFNS structure shows no difference with MNS(Metal/a-SiN:H/a-Si:H) structure in C-V characteristics but the insulator capacitance value of MFNS structure is much higher than the MNS because of high dielectric constant of ferroelectric.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2013-2018
• /
• 2014

The adsorption and decomposition of trimethylene oxide ($C_3H_6O$) molecule on the Al(111) surface were investigated by the generalized gradient approximation (GGA) of density functional theory (DFT). The calculations employed a supercell ($6{\times}6{\times}3$) slab model and three-dimensional periodic boundary conditions. The strong attractive forces between $C_3H_6O$ molecule and Al atoms induce the C-O bond breaking of the ring $C_3H_6O$ molecule. Subsequently, the dissociated radical fragments of $C_3H_6O$ molecule oxidize the Al surface. The largest adsorption energy is about -260.0 kJ/mol in V3, V4 and P2, resulting a ring break at the C-O bond. We also investigated the decomposition mechanism of $C_3H_6O$ molecules on the Al(111) surface. The activation energies ($E_a$) for the dissociations V3, V4 and P2 are 133.3, 166.8 and 174.0 kJ/mol, respectively. The hcp site is the most reactive position for $C_3H_6O$ decomposing.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.9-12
• /
• 2004

The effect of x wt% CuO-y wt% $V_2O_5$ content on the microwave properties of $(Pb_{0.45}Ca_{0.55})[(Fe_{0.5}Nb_{0.5})_{0.9}Sn_{0.1}]O_3$ (PCFNS) ceramics was investigated. In order to decrease the sintering temperature and use as a Low Temperature co-firing Ceramics (LTCC), CuO-$V_2O_5$ are added in the PCFNS. The bulk density, dielectric constant (${\varepsilon}_r$) and quality factor(Q${\cdot}f_0$) increased with increase in CuO content within a limited value. The microwave properties were degraded with increases in $V_2O_5$ content. The temperature coefficient of the resonant frequency (${\tau}_f$) of PCFNS was shifted to positive value abruptly with increasing the $V_2O_5$ content, while the ${\tau}_f$ was slightly shifted to positive value with increasing the CuO content. The optimized microwave properties, ${\varepsilon}_r$ = 88, Q${\cdot}f_0$ = 6100 (GHz), and ${\tau}_f$ = 18 ppm/$^{\circ}C$, were obtained in $(Pb_{0.45}Ca_{0.55})[(Fe_{0.5}Nb_{0.5})_{0.9}Sn_{0.1}]O_3$ with 0.2wt% CuO 0.05 wt% $V_2O_5$ and sintered at $1000^{\circ}C$ for 3 h. The relationship between the microstructure and microwave dielectric properties of ceramics was studied by X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM)

• Food Science and Biotechnology
• /
• v.17 no.3
• /
• pp.603-607
• /
• 2008

Thirteen commercial antimicrobial products were examined to assess the sporicidal activity against Bacillus cereus spores at room temperature, 60 and $85^{\circ}C$. Neither the antimicrobials showed detectable antimicrobial activity against the B. cereus spores nor induced spore germination after the treatment at 0.5 or 1.0%(w/v, v/v) commercial antimicrobial agents at room temperature for 0.5 to 4 hr. However, when the antimicrobials such as chitosan, lactic acid, fermented pollen, grapefruit extract were applied with heat at $85^{\circ}C$ for 30 min, more than 1 log CFU/mL spores were additionally inactivated compared to only heat treatment without antimicrobials. Imposition of $60^{\circ}C$ to B. cereus spores with the higher concentration of 5.0%(v/v) lactic acid or 2.5%(w/v) thiamine dilaurylsulfate for the longer time incubation of 24 hr resulted in 3 log CFU/mL spore inactivation. This work showed that low concentrations of commercial antimicrobials by themselves did not inactivate B. cereus spores. However, when physical processes such as heat were combined together, antimicrobials showed a synergistic effect against B. cereus spores.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.19-26
• /
• 1972

A newly developed quartz frequency modulator utili3ing a V. V. C. diode is briefly described. Its electrical characteristics-including modulation linearity, modulation distortion, and carrier frequency stability depending upon the variation of the environmental temperature and the applied power voltage, etc.-are suitable for the modulator of a mobile or a portable F.M. transmitter according to the experimental results. The excellent over-all electrical characteristics were proved from the experimental development of the two kinds of transceivers. One is the single channal transceiver which contains a direct frequency modulator at the carrier frequency of 52.750 MHg. The other is the dual channel transceiver (the frequencies are selected from about 40 channels without tuning adjustment) whose operational frequency is composed of a modulated frequency of 10.7 MHz and the frequency generated at a channel control oscillator, As mentioned above, it is realized that the electrical characteristics of this modulation method are suitable for portable F. M. transceivers.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.280-285
• /
• 2014

In order to evaluate the insulation deterioration in the stator windings of five gas turbine generators(137 MVA, 13.8 kV) which has been operated for more than 13 years, diagnostic test and AC dielectric breakdown test were performed at phases A, B and C. These tests included measurements of AC current, dissipation factor, partial discharge (PD) magnitude and capacitance. ${\Delta}I$ and ${\Delta}tan{\delta}$ in all three phases (A, B and C) of No. 1 generator stator windings showed that they were in good condition but PD magnitude indicated marginally serviceable and bad level to the insulation condition. Overall analysis of the results suggested that the generator stator windings were indicated serious insulation deterioration and patterns of the PD in all three phases were analyzed to be internal, slot and spark discharges. After the diagnostic test, an AC overvoltage test was performed by gradually increasing the voltage applied to the generator stator windings until electrical insulation failure occurred, in order to determine the breakdown voltage. The breakdown voltage at phases A, B and C of No. 1 generator stator windings failed at 28.0 kV, 17.9 kV, and 21.3 kV, respectively. The breakdown voltage was lower than that expected for good-quality windings (28.6 kV) in a 13.8kV class generator. In the AC dielectric breakdown and diagnostic tests, there was a strong correlation between the breakdown voltage and the voltage at which charging current increases abruptly ($P_{i1}$, $P_{i2}$).

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.202-205
• /
• 2010

Purpose: Male nipple hypertrophy is a rare condition but is a social embarrassment for individual. The currently available techniques of nipple reduction already described in the literature for female patients are discussed, but the goal of treatment is different in male patients. In male patient, the diameter as well as vertical height should be reduced simultaneously to achieve better aesthetic results. Our new technique can reduce the diameter of the hypertrophic nipple as well as the vertical height efficiently and simply. Methods: A 19-years-old man with nipple hypertrophy on the right chest presented. The flap is designed based on the site of left nipple, symmetry, the diameter, and the projection desired. The widths of the V flaps determine projection, whereas the diameter of the C flap determines the diameter of the nipple and top of the new nipple. Unnecessary hypertrophic tissues are extirpated and the V flaps are elevated. The nipple base is reduced by purse-string suture technique. The V flaps are wrapped around, and C flap is used as a cap. Results: No complication including nipple necrosis or sensory loss were found during follow-up period. The normal symmetry of the nipple contour was restored. Conclusion: We describe a simple technique for male nipple reduction using a C-V flap with purse-string suture. In our experience, this technique has provided good aesthetic result and patient satisfaction.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.249-253
• /
• 2009

This paper dealt with the insulation evaluation by a measurement of partial discharge(PD) on traction motors used in a hybrid vehicle. The PD method has been accepted as an effective and a non-destructive. technique to evaluate insulation performance of low-voltage electric and electronic devices. In this paper, the PD measurement system which was manufactured with a coupling network, a low noise amplifier, and an associated electronics is described. The PD measurement system has the frequency bandwidth of $1[MHz]{\sim}30[MHz]$ at -3 [dB] and the stable sensitivity of 19 [mV/pC] for the traction motor. From the experimental results, discharge inception voltage (DIV) and apparent charge (q) were $1,100[V_{rms}]$ and 105 [pC] for the used motor, and $1,400[V_{rms}]$ and 84 [pC] for the new one. By comparing the DIV and q, we could evaluate the insulation condition for the traction motors.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.69.1-69.1
• /
• 2010

IC 443 is famous for its interaction with nearby molecular clouds and intense H2 emission lines in infrared. Therefore, it has been studied extensively for the understanding of molecular shocks. We observed H2 mission lines toward the shock-cloud interaction regions of IC 443, known as clumps B, C, and G. The observations were performed with the InfraRed Camera (IRC) onboard a satellite AKARI over 2.5-5.0 um, where previous space observations, e.g. Infrared Space Observatory (ISO) and Spitzer, do not cover. Our AKARI observations provide spectra of sequential pure-rotational and ro-vibrational H2 emission lines. For the clumps C and G, combining with previous mid-infrared observational results, we found that the H2 level populations show a significant separation between v=0 and v=1 levels; v=1 levels are under-populated than v=0 levels, therefore, the population cannot be described by two temperature LTE model, as many people have analyzed for the shocked H2 gas. We also applied the thermal admixture model, dN(H2; T)~T^(-b) dT, with varying ortho-to-para ratios according to the temperature, to describe the level population, and obtained plausible ranges of the H2 gas density and power-law index b.