• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.83-89
• /
• 2014

Purpose : In case of the intensity modulated radiation therapy (IMRT) using Tomotherapy and linear accelerator (Linac), it was to compare and to evaluate the imaging dose of MVCT and CBCT that were performed daily for the correct set up of the patient. Materials and Methods : The human body model Phantom (Anderson rando Phantom, USA) was divided into the three parts as Head, Thorax, pelvis, and after GafChromic EBT3 film cut to the size of $0.5{\times}0.5cm2$.in the center of the recording area were situated on the ant, post, left, and right surface of the phantom and 2cm in depth from the ant, post, left, right, and center surface of the phantom, the surface dose and inner dose were measured repeatedly three times, respectively, using the tomotherapy (Hi Art) and the OBI of NovalisTx. The measured film calculated the output value by RIP version6.0 and then the average value of the dose was calculated by the one-way analysis of variance. Results : Using the human body model phantom, the results of MVCT and CBCT performance were that measurements of MVCT inner dose were showed $15.43cGy{\pm}6.05$ in the head, $16.62cGy{\pm}3.08$ in the thorax, $16.81cGy{\pm}5.24$ in the pelvis, and measurements of CBCT inner dose were showed $13.28{\pm}3.68$ in the head, from $13.66{\pm}4.04$ in the thorax, $15.52{\pm}3.52$ in the pelvis. The measurements of surface dose were showed in case of MVCT performance, $11.64{\pm}4.05$ in the head, $12.16{\pm}4.38$ in the thorax, $12.05{\pm}2.71$ in the pelvis, and in case of CBCT performance, $14.59{\pm}3.51$ in the head, $15.82{\pm}2.89$ in the thorax, $17.48{\pm}2.80$ in the pelvis, respectively. Conclusion : In case of Inner dose, the MVCT using MV energy showed higher than the CBCT using kV energy at 1.16 times in the head, at 1.22 times in the thorax, at 1.08 times in the pelvis, and in case of surface dose, the CBCT was higher than MVCT, at 1.25 times in the head, at 1.30 times in the thorax, at 1.45 times in the pelvis. Imaging dose was a small amount compared to the therapeutic dose but it was thought to affect partially to normal tissue because it was done in daily schedule. However, IMRT treatment was necessarily parallel with the IGRT treatment through the image-guide to minimize errors between planned and actual treatment. Thus, to minimize imaging dose that the patients receive, when planning the treatment, it should be set up a treatment plan considering imaging dose, or it must be performed by minimizing the scan range when shooting MVCT.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1626-1631
• /
• 2012

Sixty strains of lactic acid bacteria were isolated from kimchi and used as a starter for fermented tofu. Among the isolated strains, strain KL-6 showed antimicrobial activity against various pathogens, antioxidative activity, and viability in artificial gastric juice and artificial bile acid. The selected strain KL-6 was identified as Pediococcus acidilactici KL-6 by morphological and physiological tests, including Gram staining, catalase test, and 16S rRNA sequencing. The fermentation characteristics of tofu with a kimchi ingredient mixture (Control) consisting of red pepper, garlic, ginger, sugar, salt, jeotgal, and juice of chinese cabbage were compared with those of tofus inoculated with strain KL-6 and the kimchi ingredient mixture (TL) or a pre-fermented kimchi ingredient mixture (TPL) for 24 hr at $37^{\circ}C$. The pH levels of all tested tofu samples decreased after 1 week of fermentation, reaching 3.96 (control), 3.97 (TL), and 4.03 log cfu/g (TPL) after fermentation for 14 weeks at $20^{\circ}C$. Total aerobe content of fermented tofu increased until 2 weeks of fermentation, but decreased steadily thereafter. The number of lactic acid bacteria reached $10^6$ cfu/g after 1 week of fermentation in TL and TPL, whereas it took 2 weeks for the control. The number of lactic acid bacteria in all tested tofu samples reached $10^3$ cfu/g after 14 weeks of fermentation at $20^{\circ}C$. Coliform bacteria were not detected in TL or TPL after 1 week of fermentation. The sensory scores of TL and TPL were higher than that of control in terms of taste, flavor, texture, and overall acceptability. The sensory quality of TPL was the best among all tested fermented tofu samples.

• Pediatric Infection and Vaccine
• /
• v.21 no.2
• /
• pp.81-95
• /
• 2014

Purpose: Hematopoietic cell transplantation (HCT) recipients are vulnerable to invasive infection by Haemophilus influenzae type b (Hib) and Streptococcus pneumoniae (Sp). This study was performed to evaluate immune responses after Hib and Sp vaccination in Korean pediatric HCT recipients. Methods: Patients were prospectively enrolled at Samsung Medical Center during 2009-2011. ELISA tests to detect anti-PRP IgG antibody and antibodies to Sp serotypes 4, 6B, 9V, 14, 18C, 19F, and 23F were performed at the Center for Vaccine Evaluation and Study, Ewha Medical Research Institute. Results: Ten patients (two allogeneic, eight autologous recipients) with median age 5.4 years (range 2.7-12.2 years) were enrolled. Before Hib vaccination, 60% of patients' anti-PRP IgG titers were below $0.15{\mu}g/mL$. After vaccination, 100% of patients' anti-PRP IgG titers increased above $0.15{\mu}g/mL$ (cut-off value for detection) and $1.0{\mu}g/mL$ (cut-off value for seroprotection). For pneumococcus, in 2-5 year-old patients, pre-vaccination geometric mean concentrations (GMCs) of IgG for six serotypes (4, 6B, 9V, 14, 18C, and 23F) were below $0.35{\mu}g/mL$ and at 5 months post-vaccination GMCs of IgG for all seven serotypes increased to above $0.35{\mu}g/mL$. In patients older than 5 years, pre-vaccination GMCs of IgG for four serotypes (4, 9V, 14, and 23F) were below $0.35{\mu}g/mL$ and at 3 months post-vaccination GMCs of IgG for all seven serotypes increased to above $0.35{\mu}g/mL$. Conclusion: Most HCT recipients had low or no protective antibodies to Hib and Sp before vaccination, but showed good immune responses to protective levels after vaccination.

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.62-69
• /
• 2005

The purpose of this study has been performed to investigate the possibility of external audit program using thermoluminescence dosimetry for electron beam in korea. The TLD system consists of LiF powder, type TLD-700 read with a PCL 3 reader. In order to determine a calibration coefficient of the TLD system, the reference dosimeters are irradiated to 2 Gy in a $^{60}CO$ beam at the KFDA The irradiation is performed under reference conditions is water phantom using the IAEA standard holder for TLD of electron beam. The energy correction factor is determined for LiF powder irradiated of dose to water 2 Gy in electron beams of 6, 9, 12, 16 and 20 MeV (Varian CL 2100C). The dose is determined according to the IAEA TRS-398 and by measurement with a PTW Roos type plane-parallel chamber. The TLD for each electron energy are positioned in water at reference depth. In this study, to verify of the accuracy of dose determination by the TLD system are performed through a 'blind' TLD irradiation. The results of blind test are $2.98\%,\;3.39\%\;and\;0.01\%(1\sigma)$ at 9, 16, 20 MeV, respectively. The value generally agrees within the acceptance level of $5\%$ for electron beam. The results of this study prove the possibility of the TLD quality assurance program for electron beams. It has contributed to the improvement of clinical electron dosimetry in radiotherapy centers.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.174-186
• /
• 1996

The purpose of this study was to evaluate the adaptability to tooth structure of composite resin and glass ionomer cement according to filling methods. In this study. two class V cavities were prepared on the buccal and lingual surface of each tooth of forty extracted human premolars. and they were randomly assigned into 4 groups with 10 teeth. The cavities of each group were filled with the CLEARFIL FII self curing resin(Control Group), Z-100 light curing resin (Group 1). $Vitremer^{TM}$ light curing glass ionomer cement(Group 2) and Z-100 light curing resin over the $Vitremer^{TM}$ liner(Group 3). The specimens underwent temperature changed from $5^{\circ}C$ to $55^{\circ}C$ five hundred times. After thermocycling. specimens were immersed in 2% methylene blue solution and stored in 100% relative humidity at $37^{\circ}C$ for 24 hours. And then. the specimens sectioned buccolingually. Degree of dye penetration at tooth-restoration interfaces were examined by Tool maker's microscope(x 200) and Image analyzer. The results were as follows : 1. On the occlusal margin. among the experimental groups. the group 2 showed the highest dye penetration($2.40{\pm}0.68$) and the group 3 showed the lowest dye penetration($1.15{\pm}0.37$). There was significant difference among the experimental groups(p<0.001). 2. On the gingival margin, among the experimental groups, the group 1 showed the highest dye penetration($3.30{\pm}0.57$) and the group 2 showed the lowest dye penetration($1.65{\pm}0.49$). There was significant difference among the experimental groups(p>0.001). 3. About total degree of dye penetration, the group 1 showed the highest dye penetration($2.25{\pm}1.17$) and the group 3 showed the lowest dye penetration ($1.43{\pm}0.55$). There was significant difference among the experimental groups(p<0.001). 4. The sum of dye penetration at occlusal margin was less than gingival margin. There was significant difference between occlusal margin and gingival margin (p<0.001). The results showed that differences were more pronounced at the gingival margin. Composite restorations inserted over the glass-ionomer liner demonstrated significantly less leakage than single restoration that used composite resin or glass-ionomer cement.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.50-61
• /
• 1988

접착제(接着劑) 제조(製造)를 위하여 펄프폐액(廢液)중의 리그닌을 이용(利用)하는 연구(硏究)가 1930년경(年傾)부터 진행(進行)되여 아황산펄프폐액(廢液)중의 Lignosulfonate의 경우는 페놀수지(樹脂)나 요소수지(要素樹脂)에 증량(增量)시키거난 반응(反應)시키는 연구(硏究)인데 비하여 kraft 리그닌을 이용(利用)하는 경우는 페놀수지(樹脂)의 보문(報文)이 주류(主流)를 이루고 있으나 요소계(要素系) 공축합수지(共縮合樹脂)는 아직 발표(發表)된 바 없으며 또한 아직까지 리그닌을 이용(利用)한 상업적(商業的)인 접착제(接着劑)가 제조(製造)되어 활용(活用)되지 못하고 있는 실정(實情)이다. 따라서 본(本) 연구(硏究)는 합판제조(合板製造)의 원가절감(原價節減), 폐액이용(廢液利用)의 환경보존관점(環境保存觀點)에서 Krfat Pulp 폐액(廢液)중의 리그닌접착제(接着劑)의 제조(製造)하고져 실시(實施)하였으며, Urea-Lignin 접착제(接着劑)의 도포량(塗布量)은 일반적(一般的)으로 합판(合板)에 도포(塗布)되는 요소수지(要素樹脂)의 량(量)(320g/$m^2$)과 동일(同一)하고 압축응력(壓縮應力)은 균일(均一)하게 12kg/$cm^2$으로 하여 열압조건(熱壓條件)(온도(溫度), 시간(時間))의 영향(影響))을 아울러 규명(糾明)하였다. Urea-Formaldehyde와 Kraft lignin의 혼합비(混合比)는 중량비(重量比)(N.V.C)로 7:3으로 합성수지(合成樹脂)를 만들어 합판제조(合板製造)를 통(通)하여 구명(究明)를 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. 본(本) 실험(實驗)의 결과(結果) 요소수지(要素樹脂)의 약(約) 30%가 krfat lignin으로 대체(代替)할 수 있음을 보여준 바, Pulping 공정(工程)의 부산물(副産物)로 얻어진 폐액(廢液)은 합판제조시(合板製造時) 접착제(接着劑)의 대체원(代替源)으로 유효(有效)하다. 2. 경제적관점(經濟的觀點)에서 합판제조(合板製造)를 위한 최적열압조건(最適熱壓條件)은 $160^{\circ}C$에서 3분(分)으로 압착(壓搾)하는 것이 적절(適切)하였다.(상태(常態)): 16.49kg/$cm^2$, 내수(耐水) : 18.56kg/$cm^2$, 내온수(內溫水) : 12.53kg/$cm^2$). 3. 요소-리그닌 접착제(接着劑)로 제조(製造)된 합판(合板)의 전단인장강도(剪斷引長强度)는 양호(良好)한 접착력(接着力)을 나타냈으며, 내수접착력(耐水接着力)($30^{\circ}C$에서 3시간(時間) 심적후(沈積後) 시험(試驗)은 상태접착력(狀態接着力)과 별차이가 없거나 더 높은 인장강도력(引長强度力)을 보여준 바, 내수합판용(耐水合板用) 접착제(接着劑)로 상당한 전망(展望)을 나타냈다.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.269-279
• /
• 1984

The optimum conditions for measuring cadmium content of less than 0.2ppm by flame atomic absorption spectrophotometry were investigated. The cadmium in urine was extracted by APDC-MIBK for the analysis by atomic absorption spectrophotometry after ashing them by a wet method. 1. Optimum conditions by APDC-MIBK and DDTC-MIBK extractions. The acidic aqueous solution was prepared with appropriate amount of 0.IN nitric acid, 5ml of 25% (W/V) sodium potasstum tartarate, 10ml of saturated ammonium sulfate, and 2ml of 2% APDC(or 1 ml of 5% DDTC) chelating agent. The total volume of solution was adjusted to 55 ml and pH to $2{\sim}10$ (or$7{\sim}10$). The aqueous solution was extracted with 10ml MIBK. Concentration of Triton X-100 did not effect the absorbance for APDC-MIBK extraction of cadmium, but absorbance decreased as the concentration increased for DDTC-MIBK extraction. The sensitivity and detection limits for the cadmium determination from APDC-MIBK extraction were 0.0038ppm and 0.0102, 0.0022ppm and 0.0116 for DDTC-MIBK, and 0.0132ppm and 0.0034 for 0.1N nitric acid. APDC-MIBK and DDTC-MIBK extractions were 3 times higher than 0.1N nitric acid for the sensitivity. 2. Excretion of cadmium in 24-hour urine by APDC-MIBK extraction. Determination of cadmium in urine by atomic absorption spectrophotometry of A.A. (Cd=2 mA) mode and B.C. (Cd=4 mA) mode and B.C. (Cd=4mA, $D_2=20mA$) mode showed some difference (p<0.05). The difference of cadmium determination and recovery according to method of standard additions and standard calibration curve method in urine was not significant (p>0.05, $93.48{\pm}11.78%,\;94.83{\pm}22.00%$). Excretion of cadmium in 24-hour urine collection from normal person and variance analysis within measurement variation was not significant (p>0.05), but between interindividual was significant (0.05). Determination of cadmium content by two different methods of flame atomic absorption spectrophotometry and dithizone colorimetry showed that the results from the two methods can be described by a regression line with a good correlation (y=1.0153x-0.2927, x=Cd by D.C., y=Cd by A.A.S., $r=0.8651^*$, p<0.01).

• The Korean Journal of Pain
• /
• v.12 no.1
• /
• pp.36-42
• /
• 1999

Background: The current maximal recommended doses of lidocaine are 7 mg/kg with $5\;{\mu}g/ml$ of epinephrine. But in clinical practice, sometimes more doses of lidocaine are required to produce adequate regional anesthesia. Method: Twenty-two healthy women patients were divided into two groups and pretreated with valium 5 mg p.o., morphine 5 mg i.m., and midazolam 2 mg i.v. before operation. Of these, 7 mg/kg of 2% lidocaine with $5\;{\mu}g/ml$ of epinephrine were given to 11 patients epidurally. Initial 3 ml of epinephrine mixed lidocaine was given as a test dose and remaining doses were given 5 ml/30 sec with 3 min intervals. Radial arterial blood were drawn at 5, 10, 15, 20, 30, 45, 60, 90, 120 min to measure plasma lidocaine concentrations. After confirming all of the peak plasma concentrations of 7 mg/kg lidocaine were absolutely under $5\;{\mu}g/ml$, the other 11 patients were given 10 mg/kg of 2% lidocaine with $5\;{\mu}g/ml$ of epinephrine epidurally and blood samplings were taken according to the same method of 7 mg/kg group. The peak plasma concentration ($C_{max}$), time to reach to $C_{max}$ ($T_{max}$), time to reach to $T_4$, maximal sensory block level, systemic toxicity, and vital sign changes were investigated. Result: $C_{max}$ was significantly higher in 10 mg/kg group ($5.1{\pm}1.3\;{\mu}g/ml$) than 7 mg/kg group($3.3{\pm}0.5\;{\mu}g/ml$), but $T_{max}$ ($10.5{\pm}2.7$ min vs $10.9{\pm}3.1$ min) was not different. Time to reach $T_4$ was significantly shorter in 10 mg/kg group ($9.5{\pm}2.7$ min) than 7 mg/kg group ($12.7{\pm}3.2$ min) but maximal sensory block level ($T_{3.7{\pm}0.7}$ vs $T_{2.7{\pm}1.0}$) was not different. In four patients of 10 mg/kg group, peak plasma concentrations exceeded $5\;{\mu}g/ml$, but no systemic toxicities appeared. No significant vital sign changes were observed. Conclusion: The current maximal recommended doses of lidocaine, merely based on body weight are not always appropriate. Further studies are needed to determine more precise guideline of maximal doses that include various pharmacokinetic components.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.551-558
• /
• 1992

The extracellular endoinulase from Streptomyces sp. 556 was purified and characterized, The culture broth was fractionated by ammonium sulfate saturation followed by DEAE-cellulose column chromatography and 5ephadex G-200 gel filtration, The ultimately purified fraction revealed a single band in 7.5% polyacrylamide gel electropherogram. The purified enzyme showed the maximal activity at pH 5.5-6.0 and $50^{\circ}C$, but lost 93% of inulase activity after 30 min incubation at $55^{\circ}C$ . The essen.tial amino acid residue for catalytic activity appeared to be tryptophan. This endo inulase was activated by $Mn^{2+}$, whereas inactivated by $Ag^{+}$, $Hg^{+}$, $Cu^{2+}$, $Zn^{2+}$, $Fe^{3+}$ and $Mo^{6+}$ EDTA and 8-hydroxyquinoline inhibited the enzyme so that the enzyme was considered to be a metalloenzyme. The Km value for inulin was 0.287 mM, and no invertase or $\alpha$-glucosidase activity was found in the enzyme.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.2
• /
• pp.64-73
• /
• 2015

The distributions of Pb and Cd concentrations in the surface seawater of the East Sea were investigated during the R/V Lavrentyev cruise (July 2009) in which four transects from Russia shore to South were conducted to collect 26 surface water samples. The total dissolved concentrations of Pb and Cd were measured using ICP-MS (Perkin Elmer, DRC-e). In the coastal area, their concentrations of Russia shore (Pb, 0.08; Cd, 0.10 nM) were comparable for Cd but on the other hand, 6 times lower for Pb than Korea shore (Pb, 0.49; Cd, 0.11 nM). In the subregion, their concentrations of Warm region (Pb, 0.22; Cd, 0.01 nM) were about 1.7 times higher for Pb but 0.4 lower for Cd than Cold region (Pb, 0.13; Cd, 0.14 nM). The distributions of Pb and Cd concentrations were divided by lowest level at $10^{\circ}C$ of water temperature. Below $10^{\circ}C$, Pb and Cd concentrations increased when surface water temperatures decreased. Above $10^{\circ}C$, their concentrations increased with temperature, which showed highest concentrations in the Ulleung basin, directly influenced by flux from East Korean Warm Current and neighboring countrys (Korea and Japan). Specially, in the case of Pb, the concentrations decrease remarkablely with temperatures decrease from D10 directly influenced by flux from East Korean Warm Current, which shows highest Pb level. By comparing with other sea areas (Western Mediterranean, East Pacific), Pb concentrations in the East Sea were a little higher. The influence of East Korean Warm Current and neighboring countrys (Korea and Japan) may be relatively important. Therefore, the distribution of Cd may primarily be influenced by mixing of different water masses while the distribution of Pb may mainly be influenced by flux from East Korean Warm Current and atmospheric inputs. River inputs and interaction with particulate materials may also some roles for the distribution of these elements.