• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.365-379
• /
• 1994

Pool boiling experiments were carried out to study the effect of electric field on nucleate boiling heat transfer. CFC-11 and its alternative HCFC-123 were used as working fluids. Boiling on both single tube and a bundle of five tubes was investigated. Heat flux varied from 5 to $25kW/m^2$ while the applied voltage changed from 0 to 1kV. The results showed that at low heat flux where boiling was not present or very weak, electric field-induced forced convection helped increase the heat transfer coefficients of CFC-11 and HCFC-123 significantly(4-15 times increase). However, at higher heat flux, nucleate boiling of CFC-11 which is a highly dielectric fluid, was not affected significantly by the application of electric field. In contrast to CFC-11, even at high heat flux, nucleate boiling of CFC-11 which has a relatively larger electric conductivity than CFC-11, was vigorously increased up to 2-4 times. The additional power required to apply the electric field was 1-2% of the total power consumption by the heater. The increase in overall heat transfer coefficient of evaporators with HCFC -123 was about 40%, suggesting a considerable reduction in evaporator size with EHD technique.

• Korean Journal of Clinical Pharmacy
• /
• v.16 no.1
• /
• pp.63-68
• /
• 2006

Gabapentin, 1-(aminomethyl-1-cyclohexyl)acetic acid, is anew antiepileptic drug related to ${\gamma}-aminobutyric$ acid(GABA) currently being introduced in therapy worldwide. The bioavailability and pharmacokinetics of gabapentin capsules were examined in 22 volunteers who received a single oral dose in the fasting state by randomized balanced $2{\times}2$ crossover design. After dosing, blood samples were collected for a period of 24 hours and analyzed by liquid chromatography-tandem mass spectrometry (LC/MS/MS). Time course of plasma gabapentin concentration was analyzed with non-compartmental and compartmental approaches. $WinNonlin^{(R)}$, the kinetic computer program, was used for compartmental analysis. One compartment model with first-order input, first-order output with no lag time and weighting by $1/(predieted\;y)^2$ was chosen as the most appropriate pharmacokinetic model for the volunteers. The major pharmacokinetic parameters $(AUC_{0-24hr},\;AUC_{inf},\;C_{max}\;and\;T_{max})$ and other parameters $(K_a,\;K_{el},\;V_d/F\;and\;Cl/F)$ of $Gapentin^{TM}$ (test drug) and $Neurontin^{TM}$ (reference drug) were estimated by non-compartmental analysis and compartmental analysis. The 90% confidence intervals of mean difference of logarithmic transformed $AUC_{0-24hr}\;and\;C_{max}$ were $log(0.9106){\sim}log(1.l254)\;and\;log(0.8521){\sim}log(1.0505)$, respectively. It shows that the bioavailability of the test drug is equivalent with that of the reference drug. There was no statistically significant difference between the two drugs in all pharmacokinetic parameters.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.3
• /
• pp.422-430
• /
• 2014

Pasture-based automatic milking systems (AMS) require cow traffic to enable cows to be milked. The interval between milkings can be manipulated by strategically allocating pasture. The current experiment investigated the effect of replacing an allocation of grazed pasture with grazed soybean (Glycine max) with the hypothesis that incorporating soybean would increase voluntary cow traffic and milk production. One hundred and eighty mixed age, primiparous and multiparous Holstein-Friesian/Illawarra cows were randomly assigned to two treatment groups (n = 90/group) with a $2{\times}2$ Latin square design. Each group was either offered treatments of kikuyu grass (Pennisetum clandestinum Hoach ex Chiov.) pasture (pasture) or soybean from 0900 h to 1500 h during the experimental period which consisted of 2 periods of 3 days following 5 days of training and adaptation in each period with groups crossing over treatments after the first period. The number of cows trafficking to each treatment was similar together with milk yield (mean ${\approx}18$ L/cow/d) in this experiment. For the cows that arrived at soybean or pasture there were significant differences in their behaviour and consequently the number of cows exiting each treatment paddock. There was greater cow traffic (more cows and sooner) exiting pasture allocations. Cows that arrived at soybean stayed on the allocation for 25% more time and ate more forage (8.5 kg/cow/d/allocation) relative to pasture (4.7 kg/cow/d/allocation). Pasture cows predominantly replaced eating time with rumination. These findings suggest that replacing pasture with alternative grazeable forages provides no additional incentive to increase voluntary cow traffic to an allocation of feed in AMS. This work highlights the opportunity to increase forage intakes in AMS through the incorporation of alternative forages.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.353-353
• /
• 2014

본 연구에서는 Sputter를 이용하여 Room Temp.에서 증착된 NbOx 박막의 열처리에 따른 결정도를 분석하고, 이러한 결정도의 변화가 Metal Insulator Transition특성에 의한 Threshold switching에 어떠한 영향을 미치는 지에 대하여 연구하였다. NbOx 박막의 threshold switching 특성 분석을 위해, 1.4um의 TiN 위에 15nm의 NbOx를 증착하고 Top Electrode로 Pt를 증착하여 측정하였다. 증착된 NbOx는 Nb metal target으로 Reactive Sputter를 이용하여 Room Temp.에서 증착하였으며, 조성은 Partial Oxygen Pressure를 이용하여 조절하였다. 증착된 박막의 결정도는 TEM 및 XRD를 통하여 분석하였고 조성은 XPS를 이용하여 분석하였다. Sputter로 NbOx 증착 시 Partial Oxygen Pressure에 따른 조성을 XPS로 확인한 결과, Partial Oxygen Pressure 2%에서 NbOx의 조성을, 5%이상일 경우, Nb2O5의 조성을 가지는 것으로 확인되었다. Partial Oxygen Pressure 2%에서 증착한 NbOx 박막의 열처리에 따른 결정도를 분석한 결과, As-Dep상태에서는 amorphous상태였다가 600'C이상으로 1분간 열처리를 하였을 때 NbOx의 결정도가 증가함을 확인하였다. I-V 특성 측정 결과, 열처리 온도가 증가함에 따라 initial current가 점진적으로 증가하는 경향을 보이는데, 이는 열처리 시 amorphous상에서 poly-crystalline으로 미세구조의 변화가 일어나면서 grain boundary가 생성되며 생성된 grain boundary를 통해 leakage current가 증가하는 것으로 추측된다. 또한, 결정도가 증가함에 따라 electro-forming voltage가 감소하는 경향을 보이며 안정된 threshold switching 특성을 보이고 있다. 특히, 700'C 1분간 열처리 시에는 electro-forming 과정이 없이 threshold switching이 나타나는 현상이 관찰되었다. 이로 미루어 보아, threshold switching에서 나타나는 forming 현상은 local joule heating에 의해 박막이 결정화 되는 과정으로 추측된다. 결론적으로, 박막의 결정도가 initial current 및 Threshold switching 특성에 큰 영향을 미치는 것으로 예상된다.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.57-70
• /
• 1989

The purpose of this study was to investigate the effect of salivary gland on the calcification of dentin in rats. 80 Sprague-Dawley male rats that weighed approximately 120gm were used in this study. 5 rats among them were shared as controls. 75 rats received sialoadenectomy were divided into submaxillary adenectomy group, parotidectomy group, and submaxillary-parotid gland combined removal group. In experimental groups, 25 rats in each of the 3 groups were sacrificed at the following intervals; 3 days, 1, 2, 3 and 4 weeks. All animals were sacrificed by vascular perfusion with 10% formalin. The maxillary incisors including periapical tissues were removed and defatted in 20% KOH solution at $0^{\circ}C$ for 24 hours, and dehydrated with acetone. Each tooth specimen was attached on the stab for scanning electron microscopic study. Gold was coated on the each specimen in the thickness of 300${\AA}$ at D.C. 1400V, 6mA for 6 minutes with coating machine (Eiko IB-3). Inner dentinal surfaces of the specimens were observed with SEM (Hitachi S-450). The results were as follows, 1. Parotidectomy groups were found to be inhibited the formation of dentinal calcification compared to submaxillary adenectomy groups in the eady stages. 2. Combined removal of submaxillary and parotid gland was appeared to cause more severe inhibition effect on the dentinal calcification than that of each salivary gland separately. 3. Inhibition of the calcification and mineralization of dentin caused by sialoadenectomy was more extreme from 3 day to 2 weeks after beginning of the experiments. However it was tended to be normalized after that. 4. Salivary gland was responsible for alterations in calcification and mineralization of dentinal growth.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.4
• /
• pp.535-540
• /
• 2012

${\beta}$-D-Xylosidase (E.C. 3.2.1.37) from Bifidobacterium breve K-110, which hydrolyzes ginsenoside Ra1 to ginsenoside Rb2, was cloned and expressed in Escherichia coli. The ($His_6$)-tagged recombinant enzyme, designated as XlyBK-110, was efficiently purified using $Ni^{2+}$-affinity chromatography (109.9-fold, 84% yield). The molecular mass of XylBK-100 was found to be 55.7 kDa by SDS-PAGE. Its sequence revealed a 1,347 bp open reading frame (ORF) encoding a protein containing 448 amino acids, which showed 82% identity (DNA) to the previously reported glycosyl hydrolase family 30 of Bifidobacterium adolescentis ATCC 15703. The $K_m$ and $V_{max}$ values toward p-nitrophenyl-${\beta}$-D-xylopyranoside (pNPX) were 1.45mM and 10.75 ${\mu}mol/min/mg$, respectively. This enzyme had pH and temperature optima at 6.0 and $45^{\circ}C$, respectively. XylBK-110 acted to the greatest extent on xyloglucosyl kakkalide, followed by pNPX and ginsenoside Ra1, but did not act on p-nitrophenyl-${\alpha}$-L-arabinofuranoside, p-nitrophenyl-${\beta}$-D-glucopyranoside, or p-nitrophenyl-${\beta}$-D-fucopyranoside. In conclusion, this is the first report on the cloning and expression of ${\beta}$-D-xylosidase-hydrolyzing ginsenoside Ra1 and kakkalide from human intestinal microflora.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.403-408
• /
• 1993

Hydroxypropyl chitin(HPCH) was prepared from chitin by reacting it with propylene oxide. The formation of liquid crystalline character of HPCH was investigated using halogenated organic solvents. Solid state $^{13}C$ NMR spectra for chitin and HPCH confirmed the incorporation of hydroxypropyl moiety. The degree of substitution of HPCH was around 0.8 as detected by elemental analysis. WAXD patterns of chitin and HPCH showed that an incorporation of hydroxypropyl unit in chitin contributed to reducing the crystallinity and enhancing the solubility in organic solvents. Polarized light microscopic pictures of concentrated HPCH solution showed that HPCH formed cholesteric liquid crystalline character at about 25w/v% solution in dichloroacetic acid and 1, 2-dichloroethane. Inherent viscosity of HPCH solution in a mixed solvent showed a transient decrease.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.155-162
• /
• 2013

The objective of this study is to investigate the effects of Cynanchum wilfordii (CW) on cell viability, anti-oxidant activity, volatile fatty acid (VFA) production and methane gas production. Collected rumen fluid incubated with CW powder (1% w/v) for 12 and 24 hours were analyzed for pH, VFAs and methane. Alamar blue assay showed no significant difference on the viability of 3T3-L1 and C2C12 cells treated with CW for 24 hours. TBARS data showed a dose dependent increase on the antioxidant activity of CW. VFAs increased in the CW-treated groups compared to the control group. In addition, propionate increased more than other VFAs by the treatment with CW. There was a significant decrease in methane gas production in batch culture treated with CW in 12hrs. In conclusion, it was suggested that Cynanchum wilfordii could manipulate rumen fermentation considered by increasing VFA production and inhibition of methanogenesis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.57-58
• /
• 2000

we have grown vertically aligned carbon nanotubes on a large area of Co-Ni codeposited Si substrates by thermal chemical vapor deposition using $C_2H_2$ gas. The carbon nanotubes grown by the thermal chemical vapor deposition are multi-wall structure, and the wall suface of nanotubes is covered with defective carbons or carbonaceous particles. The carbon nanotubes range from 50 to 120 nm in diameter and about 130 ${\mu}m$ in length at $950\;^{\circ}C$. Steric hindrance between nanotubes at an initial stage of the growth forces nanotubes to align vertically. The turn-on voltage was about 0.8 $V/{\mu}m$ with a current density of 0.1 ${\mu}A/cm^2$ and emission current reveals the Fowler-Nordheim mode.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.139-145
• /
• 2005

In the study, in order to deposit TaN thin film using diffusion barrier and bottom electrode we made the Plasma Assisted ALD equipment and confirmed the electrical characteristic of TaN thin films deposited PAALD method, PAALD equipment depositing TaN thin film using PEMAT(pentakis(ethylmethlyamlno) tantalum) Precursor and $NH_3$ reaction gas is aware that TaN thin film deposited of high density and amorphous phase with XRD measurement The degree of diffusion and react ion taking place in Cu/TaN(deposited using 150 W PAALD)/$SiO_2$/Si systems with increasing annealing temperature was estimated from MOS capacitor property and the $SiO_2(600\;\AA)$/Si system surface analysis by C-V measurement and secondary ion material spectrometer(SIMS) after Cu/TaN/$SiO_2(400\;\AA)$ system etching. TaN thin film deposited PAALD method diffusion barrier have a good diffusion barrier property up to $500^{\circ}C$.