• Korean Journal of Environment and Ecology
• /
• v.36 no.5
• /
• pp.507-524
• /
• 2022

In this study, we revealed the location environment and community structural characteristics after extensively investigating Korea's warm-temperate island areas and categorizing vegetation through TWINSPAN analysis. Based on it, this study aims to suggest the direction of the vegetation restoration plan for warm-temperate forests by deriving a restoration strategy for each vegetation type. The vegetation types were clearly divided into eight types, and communities I through IV were good evergreen broad-leaved forests dominated by Machilus thunbergii and Castanopsis sieboldii. On the other hand, communities V through VIII were Pinus thunbergii forest, deciduous broad-leaved forest, and artificial forest, and retrogressive succession vegetation in the warm-temperate areas. The environmental factors derived from the DCA analysis were altitude (average temperature of the coldest month) and distance from the coastline (salt tolerance). The distribution pattern of warm-temperate forests has been categorized into M. thunbergii, C. sieboldii and Cyclobalanopsis spp. forest types according to the two environmental factors. It is reasonable to apply the three vegetation types as restoration target vegetation considering the location environment of the restoration target site. In communities V through VIII, P. thunbergiiand deciduous broad-leaved formed a canopy layer, and evergreen broad-leaved species with strong seed expansion frequently appeared in the ground layer, raising the possibility of vegetation succession as evergreen broad-leaved forests. The devastated land where forests have disappeared in the island areas is narrow, but vegetation such as P. thunbergii and deciduous broad-leaved forests, which have become a retrogressive succession, forms a large area. The restoration strategy of renewing this area into evergreen, broad-leaved forests should be more effective in realizing carbon neutrality and promoting biodiversity.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 1999.04a
• /
• pp.1-1
• /
• 1999

부유대용융법에 의하여 불순이온의 종류와 각 이온의 주입 농도를 달리하는 Rutile 단결정을 성장하였다. 성장된 결정으로부터 제조한 박편시료를 이용하여 결정결함과 광투과도에 미치는 각 불순이온의 영향을 조사하였다. 결정성장용 주원료로 99.99%의 TiO2를 사용하고, 불순이온 주입을 위한 원료로서 99.99%의 Al2O3, H3BO3, Ga2O3, Sc2O3, V2O5, Fe2O3, ZrO2, Er2O3, Cr2O3를 각각 사용하였다. 불순이온의 종류에 따르는 영향을 조사하기 위하여 TiO2 99.8 atomic%-불순이온 0.2atomic%의 조성이 되도록 각 이온별로 원료를 정밀하게 평량하고 균일 혼합하였다. 불순 이온의 첨가량에 따르는 영향을 조사하기 위하여 Al2O3는 각각 pure, 0.2, 0.4, 0.6 atomic%를, Cr2O3는 pure, 0.003, 0.05, 0.2 atomic%를 각각 치환하여 원료를 조합하였다. 균일 혼합된 원료를 직경 8mm의 고무 튜브에 넣고 CIP(Cold Isostatic Press0에서 2000kg/$\textrm{cm}^2$의 압력으로 성형한 후 150$0^{\circ}C$에서 1시간 소결함으로서 결정성장용 다결정 원료를 합성하였다. 합성된 다결정을 double ellipsoidal mirror 내에 설치하고,halogen lamp로 가열하여 원료의 한쪽 끝을 용융한 다음, 20rpm의 회전속도, 3-5mm/hr의 성장속도로 하는 유속 1$\ell$/min의 O2 분위기속에서 부유대용융법에 의하여 결정을 성장하였다. 성장된 결정을 성장축에 수직한 방향으로 각각 절단, 연삭, 연마한 박편을 이용하여 편광하에서 low-angle grain boundaries 및 기타의 결정결함을 관찰하였으며, 0.3$\mu\textrm{m}$~0.8$\mu\textrm{m}$ 범위 및 0.6$\mu\textrm{m}$~3.4$\mu\textrm{m}$ 범위에서의 투과 및 흡수 스펙트럼을 측정하였다. 결정 성장 결과 B3+, Er3+, Cr3+ 이온은 Ti4+ 이온과 이온의 크기 차이가 심하여 결정의 정상적인 성장을 방해하는 물성을 나타냈고, V5+, Cr3+ 이온은 흑색의 결정, Fe3+ 이온은 적갈색의 결정으로 성장되었다. Al3+, Zr4+, Al3+의 순서로 투과도가 높아지는 것이 관찰되었다. 불순이온의 농도에 따른 영향으로서 Al3+ 이온의 경우 주입농도가 높아질수록 low angle boundary와 oxygen deficiency가 감소하였고, 투과율은 조금 감소하거나 큰 차이가 없는 것으로 나타났다. 반면에 Cr3+ 이온을 주입한 경우 0.003 atomic%에서 최적의 물성을 보였으며, 주입농도가 높아질수록 결정성장이 어려워지고 광의 투과도가 급격히 저하되었다.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.2
• /
• pp.137-168
• /
• 2020

Air passengers may be compensated for damages based on the above agreement when the passenger suffers an accident to the extent that they are recognized as an accident under Article 17 of the Montreal Convention in 1999. If a flight or cabin crew and passengers both undergo an accident, passengers are subjected to compensation under the Montreal Convention however flight cabin crews will be compensated by the Labor Law, which is the governing law in the labor contract with the airline. The flight or cabin crew boarding the aircraft work is on a work contract, not a passenger transport contract. Therefore, if the flight or cabin crew on the aircraft is injured due to an accident, and the air carrier is liable for default due to a labor contract, the Labor Law, workers or survivors claim damages due to illegal acts against the employer. In which case, civil law will apply. In this regard, if a Chinese cabin crew working for a Chinese airline dies due to an accident in the Republic of Korea, whether the family of the deceased claims damages against the Chinese airline or not has international court jurisdiction in the Republic of Korea, which is the place of tort. We examined whether it is the law of the Republic of Korea or whether it's the Chinese law, the law applicable to the work contract, is applied. Also, Seoul District Court 1995.5.18. The sentence 94A 14144 was found that if the injured crew during the flight work was not satisfied with the insurance compensation under the Labor Standards Act and the Industrial Accident Compensation Insurance Act, he could claime to damage under the civil law against an air carrier or third parties responsible for the accident. This law case shows that you can claim a civil damage as a cause. In case of death due to an existing illness while on the way to work, the Korea Workers'Compensation and Welfare Service did not recognize the death of the deceased as an occupational accident, and the trial was canceled by the parents of the deceased for the survivor's benefit and funeral expenses. (Seoul Administrative Court 2017.8. 31. Although the sentence was judged as an occupational disaster in 2016, the 2016 8816 Decision), it was defeated in the appeals court (Seoul High Court 2018.7.19.Sentence 2017 No. 74186) and I criticized the judgment of the appeal by analyzing the deceased's disease and related the cause of it to workload. Sometimes, a flight or cabin crew is on board not for the flight duty such as transferring to another flight or returning to the home base or lay-over place after their scheduled flight, this is called "Deadheading". If the crew who is not considered the same as a passenger, but is not on duty, is injured in an accident, does the crew claim compensation for damages under the labor contract or whether the Montreal Convention is applied to the passenger. In conjunction with the discussion, there was a similar case, In re Mexico City Aircrash of October 31, 1979, 708 F.2d 400 (9th Cir. 1983), Demanes v. United Airlines, 348 F.Supp. 13 (C.D.Cal. 1972), Sulewski v. Federal Express Corp., 749 F.Supp. 506 (S.D.N.Y. 1990) and reviewed by the European Court of Justice (CJEU) at Wucher Helicopter GmbH and Euro-Aviation Versicherungs AG v. After examining several acts in several countries it's undeniably crucial to clearly understand the definition of "passenger" as stated in the Fridolin Santer case.

• Korean Journal of Food Science and Technology
• /
• v.14 no.2
• /
• pp.151-155
• /
• 1982

Effects of vitamins, metabolic intermediates and several inorganic mineral salts on the biomass and lipid accumulation of Mucor plumbeus were investigated after 15 days of incubation at $37^{\circ}C$ under static culture condition. The optimum concentrations of various vitamins were ${\gamma}/l$ for biotin, and 0.01 g/l for nicotinic acid, pyridoxine, thiamine and riboflavin. Among them pyridoxine was the most stimulatory. The maximum felt weight and lipid content per 50ml medium were $2.82{\pm}0.14\;g$ and 62.8%. Triglyceride content of neutral lipid produced under this condition was 64.9%. The major fatty acids were oleic acid (50.0%), linoleic (23.8%) and palmitic acid (13.9%). Malonic acid was considered not to be desirable even though it stimulated the biomass and lipid accumulation because triglyceride content was lowered considerably comparing with control. $MgSO_4{\cdot}7H_2O$ was the most stimulatory among the various magnesium salts and its optimum concentration was 5 g/l. Mucor plumbeus did not require $NaH_2PO_4$ for the stimulation of felt and lipid production. However, the addition of $MnCl_2$ at the concentration of 2 g/l was stimulatory to show $2.76{\pm}0.28\;g$ of felt/50 ml and 56.4% lipid content, and 73.9% triglyceride in the neutral lipid.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.545-552
• /
• 1998

This study was undertaken to clarify the effects of electrical stimulation on the biochemical properties of plaice sarcoplasmic reticulum and myofibrils at early period of death. The plaices were electrically stimulated (110V/60 Hz) In sea water bath for 15, 35, and 60 seconds, and killed instantly by spiking at the head. Killed samples were investigated for the changes in $Ca^{2+}$-ATPase activity of FSR (fragmented sarcoplasmic reticulum), LSR (light SR), HSR (heavy SR), and SDS-PAGE pattern of FSR. $Ca^{2+}$-ATPase activity of FSR increased until $45^{\circ}C$ and inactivated over $50^{\circ}C$. $Ca^{2+}$-ATPase activity of FSR remarkably decreased according to the duration of electrical stimulation. Myofibrillar $Mg^{2+}$-ATPase activity of electrically stimulated plaices in the presence of $Ca^{2+}$ was higher than that of sample instantly killed by spiking. $Mg^{2+}$-ATPase activity of myofibrils increased by electrical stimulation and the activity decreased during storage at $5^{\circ}C$. Myofibrillar $Mg^{2+}$-ATPase activity in sample killed by spiking was not affected by $Ca^{2+}$ ion. Myofibrillar $Mg^{2+}$-ATPase activity of electrically stimulated sample in the absen-re of $Ca^{2+}$ decreased during storage at $5^{\circ}C$, whit $Mg^{2+}$-ATPase activity in unstimulated sample did not show any change. $Ca^{2+}$-sensitivity of myofibrils showed no differences between electrically stimulated sample and sample killed by spiking, and the was no change during at $5^{\circ}C$.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.1
• /
• pp.10-19
• /
• 2020

BACKGROUND: This study was to carry out risk assessment of contamination of cadmium (Cd), lead (Pb), and inorganic arsenic (I-As) in agricultural products of 25 crops from the abandoned mine areas. The 36 typical investigation sites located in Gyeongbuk provincial area were selected by considering the heavy metal levels, that had been known that the amount of the heavy metals exceeded the contamination level based on the previous survey. METHODS AND RESULTS: Cadmium, lead, and total arsenic (T-As) concentrations were determined using microwave device and ICP-MS. Inorganic arsenic was determined by HPLC-ICP-MS. The limits of quantification for heavy metals were 0.59 ㎍/kg for Cd, 0.42 ㎍/kg for Pb, 0.55 ㎍/kg for T-As, and sum of As (III) (1.74 ㎍/kg) and As (V) (2.25 ㎍/kg) for I-As, respectively. The contents of Cd, Pb, and I-As (only rice) were N.D.-0.958 mg/kg, N.D.-0.227 mg/kg, and 0.082 mg/kg, respectively, in the agricultural products. For risk assessment, dietary exposures of heavy metals through usual intake were 5.20×10^-4-7.15×10⁰ ㎍/day for Cd, 7.00×10^-5-7.75×10^-1 ㎍/day for Pb, and 1.17×10¹ ㎍/day for I-As, taking 0.01-14.37%, 0.01-2.05%, and 15.16% as risk indices, respectively. CONCLUSION: It requires to consider the critical levels of heavy metals in agricultural products due to unexpectedly high levels in a few places, while concentrations of heavy metals in the samples were relatively low in most areas.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.69-76
• /
• 2008

This work proposes a 12b 1kS/s 65uA 0.35um CMOS algorithmic ADC for sensor interface applications such as accelerometers and gyro sensors requiring high resolution, ultra-low power, and small size simultaneously. The proposed ADC is based on an algorithmic architecture with recycling techniques to optimize sampling rate, resolution, chip area, and power consumption. Two versions of ADCs are fabricated with a conventional open-loop sampling scheme and a closed-loop sampling scheme to investigate the effects of offset and 1/f noise during dynamic operation. Switched bias power-reduction techniques and bias circuit sharing reduce the power consumption of amplifiers in the SHA and MDAC. The current and voltage references are implemented on chip with optional of-chip voltage references for low-power SoC applications. The prototype ADC in a 0.35um 2P4M CMOS technology demonstrates a measured DNL and INL within 0.78LSB and 2.24LSB, and shows a maximum SNDR and SFDR of 60dB and 70dB in versionl, and 63dB and 75dB in version2 at 1kS/s. The versionl and version2 ADCs with an active die area of $0.78mm^2$ and $0.81mm^2$ consume 0.163mW and 0.176mW at 1kS/s and 2.5V, respectively.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2010

Fruit wine from Acanthopanax sessiliflorus(A. sessiliflorus) including many pharmacological components was manufactured and its functional properties were investigated. The fruit part of A. sessiliflorus contained 75.74${\pm}$0.49%(w/w) moisture, 12.51${\pm}$1.23%(w/w) crude protein, 4.20${\pm}$0.51.%(w/w) crude fat and 5.21${\pm}$1.64%(w/w) crude ash. Minerals of fruit were potassium(12.94${\pm}$0.08 mg/g), calcium(1.53${\pm}$0.06 mg/g) and magnesium(1.12${\pm}$0.05 mg/g). Initial soluble solid and fermentation temperature were 24-30$^{\circ}$Brix and 20${^{\circ}C}$ for manufacturing fruit wine from A. sessiliflorus. When initial soluble solid of a must was adjusted to more than 30$^{\circ}$Brix, ethanol production was suppressed slightly. The polyphenol content of the fruit wine fermented at 20${^{\circ}C}$(125.24${\pm}$1.86 mg/mL) was higher than those at 25${^{\circ}C}$(99.69${\pm}$2.11 mg/mL) and 30${^{\circ}C}$(95.55${\pm}$1.54 mg/mL). Electron donating activities of wines fermented at 20, 25 and 30${^{\circ}C}$ were 85.9${\pm}$2.3, 55.7${\pm}$2.5 and 55.2${\pm}$3.4%, respectively. The content of eleutheroside B increased up to 146.58${\pm}$4.10 $\mu$g/mL during fermentation. There was no significant effect of fermentation temperature on eleutheroside B content. The fruit part of A. sessiliflorus can be used as a valuable resource for development of nutraceutical foods.

• The Korean Journal of Physiology and Pharmacology
• /
• v.17 no.1
• /
• pp.57-64
• /
• 2013

Cells can resist and even recover from stress induced by acute hypoxia, whereas chronic hypoxia often leads to irreversible damage and eventually death. Although little is known about the response(s) to acute hypoxia in neuronal cells, alterations in ion channel activity could be preferential. This study aimed to elucidate which channel type is involved in the response to acute hypoxia in rat pheochromocytomal (PC12) cells as a neuronal cell model. Using perfusing solution saturated with 95% $N_2$ and 5% $CO_2$, induction of cell hypoxia was confirmed based on increased intracellular $Ca^{2+}$ with diminished oxygen content in the perfusate. During acute hypoxia, one channel type with a conductance of about 30 pS (2.5 pA at -80 mV) was activated within the first 2~3 min following onset of hypoxia and was long-lived for more than 300 ms with high open probability ($P_o$, up to 0.8). This channel was permeable to $Na^+$ ions, but not to $K^+$, $Ca^+$, and $Cl^-$ ions, and was sensitively blocked by amiloride (200 nM). These characteristics and behaviors were quite similar to those of epithelial sodium channel (ENaC). RT-PCR and Western blot analyses confirmed that ENaC channel was endogenously expressed in PC12 cells. Taken together, a 30-pS ENaC-like channel was activated in response to acute hypoxia in PC12 cells. This is the first evidence of an acute hypoxia-activated $Na^+$ channel that can contribute to depolarization of the cell.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.309.2-309.2
• /
• 2014

산화아연은 넓은 밴드갭과 큰 엑시톤 에너지를 갖고 있어 광전자반도체 물질로 산화인듐주석의 대체물질로 유망하다. 그러나, 산화아연 박막 및 나노막대는 대부분 c-축 방향으로의 성장이 보고되고 있다. 하지만, c-축으로 성장하는 극성 산화아연은 자발분극과 압전분극을 갖으며 이는 quantum confinement Stark effect (QCSE)를 발생시킨다. 그러므로, 반극성과 무극성 산화아연의 연구가 활발히 진행 되고 있다. 더욱이, 산화아연 나노구조체는 넓은 표면적, 높은 용해도, 광범위한 적용분야 등의 이점으로 많은 연구가 이뤄지고 있다. 본 연구에서는 m-면 사파이어 기판 위에 원자층 증착법을 이용하여 비극성 산화아연의 박막을 형성 후 전기화학증착법을 이용하여 반극성 산화아연 막대를 성장하고 이에 대한 성장 메커니즘을 분석하였다. 반극성 (10-11) 산화아연 나노구조체를 성장하기 위하여 두 단계 공정을 이용하였다. 먼저 원자층 증착법을 이용하여 m-면 사파이어 기판 위에 60 nm의 산화아연 씨앗층을 $195^{\circ}C$에서 성장 하였다. X-선 회절분석을 통하여 m-면 사파이어 위에 성장한 산화아연 씨앗층이 무극성 (10-10)으로 성장한 것을 확인하였다. 무극성 산화아연 씨앗층 위에 나노구조체를 형성하기 위하여 전기화학 증착법을 이용하여 주 공정이 진행되었다. 전구체로는 질산아연헥사수화물 ($Zn(NO3)2{\cdot}6H2O$)과 헥사메틸렌테트라민을 ((CH2)6N4)을 사용하였다. 무극성 산화아연 기판을 질산아연헥사수화물과 헥사메틸렌테트라민을 용해한 전해질에 담근 뒤 $70^{\circ}C$에서 두시간 동안 -1.0V의 정전압을 인가하였다. SEM을 이용한 표면 분석에서 원자층 증착법을 이용해 성장한 무극성 산화아연 씨앗층 위에 산화아연 나노구조체를 성장 시, 한 방향으로 기울어진 반극성 산화아연 나노구조체가 성장하는 것이 관찰되었다. 산화아연 막대의 성장 시간에 따라 XRD를 측정한 결과, 성장 초기에는 매우 약한 $31.5^{\circ}$ (100), $34.1^{\circ}$ (002), $36^{\circ}$ (101) 부근의 피크가 관찰되는 반면, 성장 시간이 증가함에 따라 강한 $36^{\circ}$ 부근의 피크가 관찰되는 X-선 회절 분석 결과를 얻을 수 있었다. 이는, 성장 초기에는 여러 방향의 나노구조체가 성장하였지만 성장시간이 점차 증가함에 따라 (101) 방향으로 우선 성장되는 것을 확인하였다.