• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.309.2-309.2
• /
• 2013

Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 일반적으로 Na을 함유하고 있는 소다회유리를 기판으로 사용하여 제작되며, 높은 광전 변환 효율로 인해 많은 연구가 이루어지고 있다. 특히 제조 비용 절감과 양산성 향상을 위해 현재 유연 기판 CIGS 박막 태양전지에 대한 연구가 활발히 이루어지고 있으며, 폴리이미드 기판에서 20.4%의 최고 효율이 보고되었다. 유연 기판은 유리 기판 대비 무게가 가볍기 때문에 유리 기판 태양전지보다 활용도가 높으며, 우주용으로 사용할 경우 단위 무게 당 발생되는 전력이 높은 장점이 있다. 본 연구에서는 폴리이미드 기판을 이용하여 유연 CIGS 박막 태양전지를 제작하였다. 후면 전극 Mo은 DC sputtering으로 증착하였으며, Mo의 증착 압력에 따라 폴리이미드 기판의 잔류 응력과 전기적 특성을 분석하여 증착 압력을 결정하였다. 광흡수층인 CIGS는 다단계 동시 증발 법으로 증착하였으며, 2nd stage 공정온도는 유리 기판 대비 저온인 $475^{\circ}C$로 공정을 진행하였다. 저온공정인 $475^{\circ}C$ 공정에서는 Ga의 함량이 높아질수록 성능이 감소하였으며, Na 공급을 통해 Voc와 FF가 향상되어 성능이 향상됨을 알 수 있었다. 버퍼층 CdS는 습식 공정인 CBD법으로 증착하였으며, 공정변수인 thiourea의 농도와 CdS 박막의 두께 변화를 통해 폴리이미드 기판 CIGS 박막 태양전지에서 CdS 버퍼층의 최적의 조건을 도출하였다. 최종적으로 제작된 폴리이미드 기판 유연 CIGS 박막 태양전지는 반사 방지막 없이 개방전압 0.511V, 단락전류밀도 32.31mA/cm2, 충실도 64.50%, 변환효율 10.65%를 나타내었다.

• Korean Journal of Materials Research
• /
• v.25 no.3
• /
• pp.138-143
• /
• 2015

Aluminum nitride, a compound semiconductor, has a Wurtzite structure; good material properties such as high thermal conductivity, great electric conductivity, high dielectric breakdown strength, a wide energy band gap (6.2eV), a fast elastic wave speed; and excellent in thermal and chemical stability. Furthermore, the thermal expansion coefficient of the aluminum nitride is similar to those of Si and GaAs. Due to these characteristics, aluminum nitride can be applied to electric packaging components, dielectric materials, SAW (surface acoustic wave) devices, and photoelectric devices. In this study, we surveyed the crystallization and preferred orientation of AlN thin films with an X-ray diffractometer. To fabricate the AlN thin film, we used the magnetron sputtering method with $N_2$, NH3 and Ar. According to an increase in the partial pressures of $N_2$ and $NH_3$, Al was nitrified and deposited onto a substrate in a molecular form. When AlN was fabricated with $N_2$, it showed a c-axis orientation and tended toward a high orientation with an increase in the temperature. On the other hand, when AlN was fabricated with $NH_3$, it showed a-axis orientation. This result is coincident with the proposed mechanism. We fabricated AlN thin films with an a-axis orientation by controlling the sputtering electric power, $NH_3$ pressure, deposition speed, and substrate temperature. According to the proposed mechanism, we also fabricated AlN thin films which demonstrated high a-axis and c-axis orientations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.822-831
• /
• 2000

Application of omija(Schizndra chinensis Baillon) to improve the quality and preservation of nabka kimchi was attempted and the optimal amount of omija level and its effect on the sensory and microbiological properties of nab마 kimchi during fermentation were examined. Effects of omija juice which had been prepared by extracting omija seeds for 9 hr at room temperature (22.5$\pm$0.5$^{\circ}C$) with different ratios (0.5, 1.0, 1.5, 2.0%;w/v) of water were examined against control (kimchi prepared without omija). Organoleptic and microbiological properties of nabak kimchi were measured up to 25 days at 1$0^{\circ}C$ after preparation. Sensory properties were evaluated in the aspects of both acceptability and intensity characteristics. In whole, 0.5 and 1.0% treatments showed higher values of evaluation, compared to control, 1.5, and 2.0% treatments throughout the fermentation period. As fermentation progresses, however, sample of 1.0% treatment ranked first between day 4 to 7 and also so did sample of 0.5% treatment along with 1.0% treatment from behind day 10. As for color, control, 0.5% treatment, and 1.0% treatment were more favored than rest of the samples. In texture, 2.0% treatment showed the highest values, whereas control was rated the lowest. In the intensity of characteristics 1.5% and 2.0% treatments showed higher values except sweet taste in which 1.0% treatment ranked top during the initial 7 days and then 0.5% treatment took the first place at behind day 10. total cell counts and number of lactic acid bacteria were gradually increased and then decreased showing the maximum levels of microbial counts on different days, to say, day 2 for control and 0.5% treatment nd day 7 for 1.0, 1.5 and 2.0% treatments. The application of omija juice in nabak kimchi enhanced eating qualities of the fermented product and the fermentation-retarding effect of omija juice was clearly shown during the initial seven days of fermentation. The optimum levels of omija juice in nabak kimchi obtained through experiments were between 0.5 to 1.0% for color, fermentation-retarding effects, and savory taste of the product.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.817-820
• /
• 2004

The $Sr_{0.7}Bi_{2.6}Ta_2O_9$(SBT) thin films are deposited on Pt-coated electrode($Pt/TiO_2/SiO_2/Si$) using a RF magnetron sputtering method. The ferroelectric properties of SBT capacitors with annealing time were studied. In the SEM images, Bi-layered perovskite phase was crystallized at 10min and grains largely grew with annealing tune. SBT thin films are transformed from initial amorphous phase to the fully formed layer-structured perovskite. During the annealing process at $750^{\circ}C$, we found that an fluorite-like stage is formed after 3min. In the XRD pattern, the SBT thin films after 3min annealing time had (105) orientation. The ferroelectric properties of SBT capacitor with annealing time represent a favorable properties at 60 min. The maximum remanent polarization and the coercive electric field with 60 min are $12.40C/cm^2$ and 30kV/cm, respectively. The leakage current density with 60min is $6.81{\times}10^{-10}A/cm^2$.

• Transactions of Materials Processing
• /
• v.28 no.2
• /
• pp.63-70
• /
• 2019

This study investigates the effects of multi-axial diagonal forging (MADF) processing number on the microstructures of AA1100 fabricated using MADF processes. The cast AA1100 was annealed at $400^{\circ}C$ for 3hrs in $N_2$ atmosphere and cut into $25mm^3$ cubes for the MADF processes. The MADF process consist of plane forging with a thickness reduction of 30% and a diagonal forging with a diagonal forging angle of 135 degrees. In order to analyze the microstructural variations based on the number of repetitions, 1, 2, 3 and 4 cycles of the MADF process were performed. AA1100 specimens were successfully deformed without cracking of the surface for up to 4 cycles of MADF. The grain size, average misorientation and average grain orientation spread (GOS) of MADF processed materials were analyzed using EBSD technique. The results showed that MADF process effectively refined the microstructure of AA1100 with an initial average grain size of $337.4{\mu}m$. The average grain sizes of specimens which were MADF processed for 2, 3, 4 cycles were refined to be $1.9{\mu}m$, $1.6{\mu}m$, $1.4{\mu}m$, respectively. The grain refinement appeared saturated when AA1100 got MADF processed over 2 cycles. When the specimen was subjected to two or more cycles of MADF, the degree of decrease in the average grain size drastically decreased with an increase in the number of cycle due to the softening phenomena such as dynamic recovery or dynamic recrystallization during processing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.17-20
• /
• 1993

In this paper, the (1-x)($Sr_{0.50}$$Pb_{0.25}$$Ba_{0.25}$)$TiO_3$-x $Bi_2$$Ti_3$$O_{9}$(x=0,4,6,8[mol.%]) ceramics with paraelectric properties were, fabricated by mixed oxide method. The dielectric and structural properties of ceramics were studied with sintering temperature and addition of $Bi_2Ti_3O_{9}$, and the application for the high - voltage capacitor was investigated. In the specimens with sintering at 1350[$^{\circ}C$], sintered density was showed the highest value of 5.745[g/cm$^3$]. Increasing of sintering temperature, average grain size was increased. The specimen. ($Sr_{0.50}$$Pb_{0.25}$$Ba_{0.25}$)$TiO_3$sintered at 1350[$^{\circ}C$] showed good dielectric properties and breakdown voltage was showed the highest value of 200[kV]. Temperature coefficient of capacitance was stabilized in specimens added $Bi_2Ti_3O_{9}$ Sintered density. dielectric properties and breakdown voltage ware decreased with increasing the contents of $Bi_2Ti_3O_{9}$.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.3
• /
• pp.325-340
• /
• 2008

The purpose of this study was to evaluate the artificial dental plaque by Streptococcus mutans on 4 different implant surfaces. In this study, the specimens were divided into 4 groups according to implant surface treatment. Uncoated implant group(n=5) which has an uncoated, smooth surfaced implant(Osstem, Korea), SLA implant group(n=5) which has an sandblasted large grit and acid-etched surface implant(Bicon, USA). Oxidized implant group(n=5) which has an oxidized surfaced implant (Osstem, Korea), and RBM implant group(n=5) which has resorbable blasting media(RBM) surfaced implant(Osstem, Korea). Acquired pellicle by human saliva and dental plaque by Streptococcus mutans were made on each implant surface. To analyze the plaque condition on implants surfaces, cell count and optical density were taken as a microbiologic method, and SEM(Scanning Electronic Microscope) findings was also taken for evaluation of surface condition. The following results were obtained. 1. Cell counting results of artificial dental plaque were Uncoated group($658.0{\pm}102.0$), RBM group($878.0{\pm}170.0$), SLA group ($946.0{\pm}42.0$), Oxidized group($992.0{\pm}40.0$), and there was difference between Oxidized group and Uncoated implant group(p<0.05). In case of modified cell counting results by v/w% were RBM group($197.8{\pm}45.2$), Oxidized group($207.04{\pm}8.34$), Uncoated group($261.6{\pm}40.6$), SLA group($315.4{\pm}14.0$), and there was difference between RBM group and SLA group(p<0.05). 2. Optical density results of artificial dental plaque after ultrasonic treatment was that there was difference among groups, and optical density of RBM group was higher than that of Uncoated group(p<0.05). In case of modified optical density results by v/w%, there was difference among groups, and the modified optical density of Uncoated group and SLA group was higher than those of Oxidized group and RBM group(P>0.05). 3. SEM findings of artificial dental plaque on the surfaces of implant as follows; there were artificial dental plaque on the surfaces of all test implants. Streptococcus mutans and by-product were observed at 10,000 times magnified condition on all test implants. Adhesion area of artificial dental plaque was about 1/2 of total surface after 24 hours incubate at $37^{\circ}C$. These results showed that there were differences among implant surfaces on the growth of Streptococcus mutans, and bacteria and by-product were covered about 1/2 area of total implant surfaces at 24 hours incubate at $37^{\circ}C$.

• Korean Journal of Plant Resources
• /
• v.10 no.1
• /
• pp.64-85
• /
• 1997

This study was to establish the floristic composition and vegetation of resources vascular plants of Mt. Mandukbong(1,035.3 m; $128^{\circ}$54'24'E, $37^{\circ}$36'53'N). This work were investigated during the period of 1996. Resources vascular plants were composed of 97 families, 298 genera, 406 species, 70 varieties and 8 formae, Totaling 484 taxa. Among the investigated resources plants. 15 taxa(2.6%) were Korean endemic species. The forest were comparatively well conservated by Pteridophyta calculation(Pte-Q), 1.1 Useful of resources plants were Edible source(46.7%), Pasture source(37.2%), Medicinal source(35.5%), Ornamental source(12.1%)and Timber source(5.9%) respectively. The forest vegetion was classified into 1 order, 1 alliances, 1 suballiances and 4 communities; Rhododendro - Quercetalia mongolicae Kim 1990 Lindero - Quercion mongolicae Kim 1990 A. Typical community B. Quercus variablilis - Quercus mongolica Community Callicarpo - Quercenion serratae Kim 1990 C. Carex humilis v. nana - Pinus densiflora Community D. Juglans mandshurica - Urtica angustifloia community

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.73-79
• /
• 1999

The superstructured $Li_{4/3}Ti_{5/3}O_4$ was prepared by sol-gel process using a mixed solution of lithium acetate (LA) and titanium n-butoxide (TNB). The gel phase was obtained by adding ammonia water ($NH_4OH/TNB$ mole ratio of 0.35) and water ($H_2O/TNH$ mole ratio of 3.5) into the clear sol that was prepared after mixing TNB/LA mole ratio of 5/4 with AA/TNB mole raio of 0.125. It was found that the most suitable $Li_{4/3}Ti_{5/3}O_4$ was obtained by heat treatment of xerogel at $600^{\circ}C$ for 30 hrs. The synthesized $Li_{4/3}Ti_{5/3}O_4$ showed an initial discharge capacity of 174 mAh/g and the capacity loss of about 27.3% during 25 cycles in Li/1M $LiClO_4(in\;PC)/Li_{4/3}Ti_{5/3}O_4$ at current density of $0.15mA/cm^2$ and the voltage range of 0.5~3.0 V.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.380-384
• /
• 2003

Optimal extraction, separation and capillary rinsing conditions for capillary electrophoresis (CE) were established to discriminate the geographical origin of ligusticum root (Ligusticum wallichii) using 113 samples (domestic sample n = 62, foreign sample n = 51). Ligusticum root was extracted with 30% ethanol and separated on a uncoated fused-silica $(50\;{\mu}m{\times}27\;cm)$ capillary. Conditions for optimal analysis include: temperature, $40^{\circ}C$; voltage, 10 kV; and pressure injection time, domestic and foreign samples were 5 sec and 2 sec, respectively. The optimal separation buffer was 0.1 M phosphate buffer (pH 2.5) containing 15 mM iminodiacetic acid with 40% methanol. Under the optimal conditions established for CE, the ratio of specific peak area (peak LW-1) to other peak area (peak LW-5) was effective in discrimination geographical origin of ligusticum root. The mean accuracy for correct discrimination of geographical origin of domestic and foreign ligusticum roots were 65% and 63%, respectively.