• Microbiology and Biotechnology Letters
• /
• v.20 no.6
• /
• pp.677-680
• /
• 1992

The effects of pH, temperature and oxygen transfer rate(OTR) on L-Ieucine fermentation were investigated employing Corynebacterium glutamicum CH 1516 in 71 fermentor. The optimum pH, temperature and OTR were determined to be 7.0, $30^{\circ}C$ and 0.21 kmole $O_2$/$m^3{\cdot}hr$, respectively. For the values of OTR lower than 0.19 kmole $O_2$/$m^3{\cdot}hr$ a significant amount of lactic acid was accumulated, while the packed cell volume(PCV) was rapidly increased at higher OTR values above 0.23 kmole $O_2$/$m^3{\cdot}hr$ and glutamic acid was produced to some extent. Scale-up studies for L-Ieucine fermentation which was carried out in 12001 pilot scale fermentor reaffirmed the results of 71 fermentation. The optimum redox potential value for L-Ieucine production was found to be -150 to -170 mY.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.285-291
• /
• 2017

This study investigated the effects of grain size and phase constitution on the mechanical properties of $3Y-ZrO_2$ by varying the sintering conditions. The raw powder prepared by a low-cost wet milling using the coarse solid oxide powders was sintered by both pressureless sintering and hot-pressing, respectively. As increasing holding time at $1450^{\circ}C$ for pressureless sintering, it promoted the microstructural coarsening of matrix grains and the phase transformation to tetragonal phase, whereas the bimodal microstructure embedded with abnormal $cubic-ZrO_2$ grains was observed regardless of sintering time. On the other hand, the specimens hot-pressed at $1300^{\circ}C$ for 2 h reached ~ 97% of relative density with homogeneous fine microstructure and mixed phase constitution. It was found that the proportion of untransformed monoclinic zirconia had the most adverse effect on the biaxial strength compared to the impacts of grain size and density. The pressureless sintering of the low-cost powder for prolonged sintering time to 8 h led to a decent combination of mechanical properties ($H_V=13.2GPa$, $K_{IC}=8.16MPa{\cdot}m^{1/2}$, ${\sigma}=981MPa$).

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.490-496
• /
• 2015

We have grown AlN/GaN heterostructure which is a promising candidate for mm-wave applications. For the growth of the high quality very thin AlN barrier, indium was introduced as a surfactant at the growth temperature varied from 750 to $1070^{\circ}C$, which results in improving electrical properties of two-dimensional electron gas (2DEG). The heterostructure with barrier thickness of 7 nm grown at of $800^{\circ}C$ exhibited best Hall measurement results; such as sheet resistance of $215{\Omega}/{\Box}$electron mobility of $1430cm^2/V{\cdot}s$, and two-dimensional electron gas (2DEG) density of $2.04{\times}10^{13}/cm^2$. The high electron mobility transistor (HEMT) was fabricated on the grown heterostructure. The device with gate length of $0.2{\mu}m$ exhibited excellent DC and RF performances; such as maximum drain current of 937 mA/mm, maximum transconductance of 269 mS/mm, current gain cut-off frequency of 40 GHz, and maximum oscillation frequency of 80 GHz.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1790-1797
• /
• 2002

Lactic acid bacteria were isolated from piglets and chicken and characterized. Lactic acid bacteria showing resistance to low pH and bile, adhesion to intestinal epithelium cells, and the inhibition of Escherichia coli and Salmonella spp. were identified as Lactobacillus acidophilus. L. acidophilus PF01 survived for 2 h in MRS broth adjusted to pH 2. L. acidophilus CF07 was less resistant than L. acidophilus PF01 to pH 2, but survived at pH 2.5 for 2 h. Both of isolates were able to grow in MRS broth containing 0.3% (w/v) bile, with L. acidophilus CF07 being more tolerant to bile than L. acidophilus PF01. L. acidophilus PF01 and CF07 adhered specifically to the duodenal and jejunal epithelium cells of piglet, and the cecal and duodenal epithelium cells of chicken, respectively. Both of isolates did not adhere to the epithelium cells of the various animal intestines from which they were isolated. When L. acidophilus was cultured with E. coli and Salmonella spp. in MRS broth, MRS broth containing 2% skim milk powder or modified tryptic soy broth at $37^{\circ}C$, L. acidophilus PF01 and CF07 inhibited the growths of E. coli K88 and K99, and S. enteritidis and S. typhimurium, respectively. Both of isolates were found to possess the essential characteristics of probiotic lactic acid bacteria for piglet and chicken.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1641-1646
• /
• 2004

The objective of this study was to generate transgenic mice expressing human resistin gene by using the tetraploidembryonic stem (ES) cell complementation method. Human resistin gene was amplified from human fetal liver cDNA library by PCR, cloned into $pCR^{(R)}$ 2.1 $TOPO^{(R)}$ vector and constructed in pCMV-Tag4C vector. Mammalian expression plasmid containing human resistin was transfected into D3-GL ES cells by Lipofectamine 2,000, and then after 10-12 days of transfection, the human resistin-expressing cells were selected with G418. In order to produce tetraploid embryos, blastomeres of diploid embryos at the two-cell stage were fused with two times of electric pulse using 60 V 30 $\mu$sec (fusion rate: 2,114/2,256, 93.5%) and cultured up to the blastocyst stage (development rate: 1,862/2,114, 94.6%). The selected 15-20 ES cells were injected into tetraploid blastocysts, and then transferred into the uteri of E 2.5 d pseudopregnant recipient mice. To investigate the gestation progress, two E 19.5 mused fetuses were recovered by Cesarean section of which one fetus was confirmed to contain human resistin gene by genomic DNA-PCR. Therefore, our findings demonstrate that tetraploid-ES mouse technology can be considered as a useful tool to produce transgenic mice for the rapid analysis of gene function in vivo.

• The Journal of the Korean Society for Microbiology
• /
• v.14 no.1
• /
• pp.17-25
• /
• 1979

Bacteriologic diagnosis of enteric infection remains to be an important role of clinical laboratory because of the prevalence of the infection. Often the determination of etiologic agent and its susceptibility to antibiotics are of vital importance for a proper management of the infection. In our previous paper, an analysis of the isolation of enteric pathogens for the years 1969-73 was reported to clarify the status of those years. The present analysis was made based on the data obtained during the years 1974-78, to see if any change of the status was rendered. 1. During the 5-year period, from the cultures of 7,308 stool or rectal specimens 833 patients yielded enteric pathogens: 468 Shigella, 295 Salmonella, 30 Vibrio parahaemolyticus and 40 enteropathogenic Escherichia coli(EPEC). 2. Of the 295 Salmonella, 271 were S. typhi Isolation of 12 S.paratyphi-A, 1 Salmonella group B, 4 group C, 5 group D and 2 group E meant a definite increase of these sero-groups, S. typhi was most frequently isolated in August and in December, and from 30- to 39-year-old patients. 3. Of the 468 Shigella, 10 were subgroup A, 338 subgroup B, 3 subgroup C and 117 subgroup D. Most of the subgroup B belonged to type 1,2, or 3. The proportion of S. sonnei decreased from 31.3% in 1974 to 18.2% in 1978. In foreign patients, S. sonnei remained to be the frequntly isolated species. Shigella isolation was frequent in August and in 2- to 5-year-old patients. 4. V. parahaemolyticus was isolated from 30 and EPEC from 40 patients. 5. Ninty-nine per cent and 99.5% of the S. typhi isolates were susceptible to chloramphenicol and to ampicillin respectively. 92.8% of S sonnei were susceptible to ampicillin. S. flexneri type 2 was notable for their markedely decreased proportion being susceptible to ampicillin: 84.4% in 1974 and 25.6% in 1978.

• Journal of Hydrogen and New Energy
• /
• v.26 no.5
• /
• pp.416-422
• /
• 2015

Lithium Ion capacitor (LIC) is a new storage device which combines high power density and high energy density compared to conventional supercapacitors. LIC is capable of storing approximately 5.10 times more energy than conventional EDLCs and also have the benefits of high power and long cycle-life. In this study, LICs are assembled with activated carbon (AC) cathode and pre-doped graphite anode. Cathode material of natural graphite and artificial graphite kinds of MAGE-E3 was selected as the experiment proceeds. Super-P as a conductive agent and PTFE was used as binder, with the graphite: conductive agent: binder of 85: 10: 5 ratio of the negative electrode was prepared. Lithium doping condition of current density of $2mA/cm^2$ to $1mA/cm^2$, and was conducted by varying the doping. Results Analysis of Inductively Coupled Plasma Spectrometer (ICP) was used and a $1mA/cm^2$ current density, $2mA/cm^2$, when more than 1.5% of lithium ions was confirmed that contained. In addition, lithium ion doping to 0.005 V at 10, 20 and $30^{\circ}C$ temperature varying the voltage variation was confirmed, $20^{\circ}C$ cell from the low internal resistance of $4.9{\Omega}$ was confirmed.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2410-2412
• /
• 2005

In this study, two types of PS substrate were fabricated for sensing of chemical and biological substances. For sensing of the humidity and chemical analyzes such as $CH_3OH$ or $C_2H_5OH$, PS layers are prepared by photoelectrochemical etching of silicon wafer in aqueous hydrofluoric acid solution. To evaluate their sensitivity, we measured the resistance variation of the PS diaphragm. As the amplitude of applied voltage increases from 2 to 6Vpp at constant frequency of 5kHz, the resistance variation for humidity sensor rises from 376.3 to $784.8{\Omega}$/%RH. And the sensitivities for $CH_3OH$ and $C_2H_5OH$ were 0.068 uA/% and 0.212 uA/%, respectively. For biological sensing application, amperometric urea sensors were fabricated based on porous silicon(PS), and planar silicon(PLS) electrode substrates by the electrochemical methods. Pt thin film was sputtered on these substrates which were previously formed by electrochemical anodization. Poly (3-methylthiophene) (P3MT) were used for electron transfer matrix between urease(Urs) and the electrode phase, and Urs also was by electrochemically immobilized. Effective working area of these electrodes was determined for the first time by using $Fe(CN)_6^{3-}/Fe(CN)_6^{4-}$ redox couple in which nearly reversible cyclic voltammograms were obtained. The $i_p$ vs $v^{1/2}$ plots show that effective working electrode area of the PS-based Pt thin film electrode was 1.6 times larger than the PLS-based one and we can readily expect the enlarged surface area of PS electrode would result in increased sensitivity by ca. 1.6 times. Actually, amperometric sensitivity of the Urs/P3MT/Pt/PS electrode was ca 0.91uA/$mM{\cdot}cm^2$, and that of the Urs/P3MT/Pt/PLS electrode was ca. 0.91uA/$mM{\cdot}cm^2$ in a linear range of 1mmol/L to 100mmol/L urea concentrations

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.271-274
• /
• 2003

[ $Sr_xBa_{1-x}Nb_2O_6$ ] (SBN, $0.25{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient and a nonlinear electro-optic coefficient value. In spite of its advantages, SBN has not been investigated well compared to other ferroelectric materials with perovskite structure. In this study, SBN thin film was manufactured by ion beam sputtering technique using the prepared SBN target in $Ar/O_2$ atmosphere. SBN30 thin films of different thickness were pre-deposited as a seed layer on $Pt(100)/TiO_2/SiO_2/Si$ substrate followed by SBN60 deposition up to $4500\;{\AA}$ in thickness. As-deposited SBN60/SBN30 layer was heat-treated at different temperatures of 650, 700, 750, and $800\;^{\circ}C$ in air, respectively, The crystallinity and orientation behavior as well as electric properties of SBN60/SBN30 multi-layer were examined. The deposited layer was uniform and the orientation was shown primarily along (001) plane from XRD pattern. There was difference in the crystal structure with heat-treatment temperature, and the electric properties depended on the heating temperature and the seed-layer thickness. In electric properties of Pt/SBN60/SBN30/Pt thin film capacitor prepared, the remnant polarization (2Pr) value was $15\;{\mu}C/cm^2$, the coercive field (Ec) 65 kV/cm, and the dielectric constant 1492, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.68-69
• /
• 2005

Low temperature ($\leq900^{\circ}C$) sintering piezoelectric ceramics $0.01Pb(Mg_{1/2}W_{1/2})O_3$-0.41Pb$(Ni_{1/3}Nb_{2/3})O_3-0.35PbTiO_3-0.23PbZrO_3+0.1wt%Y_2O_3+xwt%ZnO$ $(0{\leq}x{\leq}2.5)$ have been developed and investigated. The electromechanical coupling coefficient ($k_p$), piezoelectric constant ($d_{33}$), and mechanical quality factor ($Q_m$) have been measured to characterize the piezoelectric materials system. When 2.0 wt% ZnO is added, the properties of the system, $d_{33}$ = 559 pC/N, $k_p$ = 55.0 % and $Q_m$ = 73.4 are obtained which are very suitable for piezoelectric actuators. A bending mode multilayer actuator has been also developed using the materials which size is $27(L)\times9(W)\times1.07(t)mm^3$. The actuators are fabricated by multilayer ceramic (MLC) process and consist of24 layers and each layer thickness is $35{\mu}m$. At this time, the displacement of actuator was $100{\mu}m$ at 28V.