• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.247-251
• /
• 2002

In general, the bubbling, generated during the fabrication of the tapes, breaks the superconducting filament, and critical current of the tapes will be decreased. Heat-treatment schemes of Bi-2223/Ag HTS tapes were modified, such as pre-annealing of multi-stacked billet, 2-step main sintering and ramp rate etc. The generation of bubbling was drastically decreased from 20 bubbles/m to 0 ~ 1 bubble/m by the modified heat-treatment. Therefore, the value of critical current of the tapes without bubbling was increased almost twice higher than that of already existing tapes. Critical current up to 42 A in 40 m length Bi-22231Ag tapes have been measured at 77K, self-field, 1$mutextrm{V}$/cm criterion. It could be confirmed that elimination of bubbling is effective to maintain the superconducting property along the tape length.

• Journal of the Korean Vacuum Society
• /
• v.2 no.1
• /
• pp.92-98
• /
• 1993

Si 기판 위에 증착된 Al 박막을 질소 ECR 플라즈마에 노출시켜 시료를 제작하고 분광타원해석법으로 분석한 결과 Al박막에 질화층이 형성되었음을 확인하였다. 사용한 질소 ECR 플라즈마의 전자온도와 전자밀도는 챔버내의 위치에 따라 각각 10~20eV, 0.9~1.2$\times$1011/㎤의 값을 보였다. 질소 ECR 플라즈마에 노출된 기판은 급격한 온도상승을 보였으며 노출시킨 뒤 5~6분이 지나면 $500^{\circ}C$ 근처에서 포화상태를 이루었다. 분광타원해석상수인 $\Delta$와 Ψ를 분석한 결과 증착된 Al의 두께는 시료에 따라 $140~160AA$이었고 표면에 형성된 AIN 층의 두께는 질소 ECR 플라즈마에 노출된 시간이 길수록 그리고 시료의 위치가 공명지점에 가까울수록 증가하였다. AlN층의 두께가 노출시간의 제곱근에 비례하는 것으로부터 AlN층은 Al의 표면에 흡착된 질소가 Al속으로 확산하여 이루어진 것으로 설명하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.13 no.3
• /
• pp.203-215
• /
• 2009

In this article, we study the existence and uniqueness of mild and classical solutions for a nonlinear impulsive differential equation with nonlocal conditions u'(t) = Au(t) + f(t, u(t); Tu(t); Su(t)), $0{\leq}t{\leq}T_0$, $t{\neq}t_i$, u(0) + g(u) = $u_0$, ${\Delta}u(t_i)=I_i(u(t_i))$, i = 1,2,${\ldots}$p, 0<$t_1$<$t_2$<$\cdots$<$t_p$<$T_0$, in a Banach space X, where A is the infinitesimal generator of a $C_0$ semigroup, g constitutes a nonlocal conditions, and ${\Delta}u(t_i)=u(t_i^+)-u(t_i^-)$ represents an impulsive conditions.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.60-64
• /
• 2001

We have studied properties of step-edge Junction prepared with crystal orientation of sapphire substrate. The Step on sapphire substrates fabricated by conventional photolithography method and Ar ion milling method. $CeO_2$ buffer layer and in-situ YBCO thin film were deposited on the stepped sapphire substrates by a pulsed laser deposition method with the predetermined optimized condition. The step angle was centre fled low angle of about $25^{\circ}$. The YBCO film thickness was varied to obtain various thickness ratios of the film to the step height in a range from 0.7 to 1.2. I-V curves of junction were showed RSJ-behavior, double junction structure, and hysteresis due to the crystal orientation of substrate.

• Journal of the Mineralogical Society of Korea
• /
• v.2 no.1
• /
• pp.11-17
• /
• 1989

The kaolin deposits in Hadong-Sancheong area, have been formed by supergene weathering of anorthositic rocks including anorthosite, leucogabbro, and gabbro. Kaolin consists chiefly of halloysite(10$\AA$) and kaolinite with other minerals such as illite, vermiculite, plagioclase, hornblende, quartz amorphous materials(allophane and siica), goethite, and hematite. Goethite and hematite are the major coloring agents of the reddish brown and other colored kaolins. Other common accessory minerals are magnetite, ilmentite, anatase, gibbsite, I/S, C/V, chlorite, lithiophorite, and birnessite. Paragonite, dravite, laumontite, clinozoisite, muscovite, scolecite, stellerite are locally found. Al substitution of Fe in goethite and hematite decreases from the surface zone toward the deeper zone. The kaolin deposits show three horizontal zoning; the upper reddish brown, middle pink, and lower white zones. All the zones are characterized by somewhat different mineralogy. The factors for the formation of kaolin deposits in Hadong-Sancheong area are 1) the presence of anorthositic rocks, 2) the low flat or gentle topography, 3) the favorable climate, and 4) the long-continued preservation of kaolins with-out erosion.

• Phonetics and Speech Sciences
• /
• v.10 no.2
• /
• pp.45-50
• /
• 2018

The vowel/consonant ratio is a well-known cue for the voicing of postvocalic consonants. This study investigates how this ratio changes as a function of speaking rate. Seven speakers of North American English read sentences containing target monosyllabic words that contrasted in coda voicing at three different speaking rates. Duration measures were taken for the voice onset time (VOT) of the onset consonant, the vowel, and the coda. The results show that the durations of the onset VOT and vowel are longer before voiced codas, and that the durations of all segments increase monotonically as speaking rate decreases. Importantly, the vowel/consonant ratio, a primary acoustic cue for coda voicing, was found to pattern asymmetrically for voiced and voiceless codas; it increases for voiced codas but decreases for voiceless codas with the decrease in speaking rate. This finding suggests that there is no stable ratio in the duration of preconsonantal vowels that is maintained in different speaking styles.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.756-760
• /
• 1988

The paper presents the measurement results on the parameters affecting the breakdown mechanism of a large air spacing under switching impulse voltages. Measured parameters are the velocities of leader channels, predischarge currents, electric charges injected into the rod-plane air gap and electric field intensities on the plane. For the 3m air gap under switching impulse voltages, the velocities of leader channel have been measured to be of 1cm/${\mu}s$ - 5cm/${\mu}s$, electric field intensity of 2kv/cm, predischarge current of 1.2A - 1.6A, the charges injected into the air gap of 11 - 40 ${\mu}$C for 400-887kV impulse voltages.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1159-1164
• /
• 2000

페롭스카이트 구조를 갖는 E $r_{1-x}$S $r_{x}$Cr $O_{3-y}$ 계에서 x=0.0, 0.05, 0.1, 0.2인 비화학양론적 화합물 고용체를 1573 K 대기압 하에서 제조하였다. X-선 회절분석을 통하여 제조된 모든 계들이 등방정계 단일상을 형성하였고, 또한 반지름이 큰 S $r^{2+}$를 doping 시켜줌에 따라 격자상수 및 환산부피가 증가됨을 알 수 있었으며, 단위 세포의 부피는 직선성을 보이며 증가하였다. TG-DTA에 따른 열분석 결과 Sr이 치환되지 않은 계에서는 상전이가 발생하는 반면, x값이 0.05 이상인 계들은 고온영역에 이르기까지 등방정계에서 마름모정계로의 상전이가 억제되었다. 전자현미경을 통하여 치환된 Sr의 몰비에 따른 시료들이 미세구조를 관찰하였고, d.c 전도도 측정을 통하여 다결정성 시료계들이 가지는 전도도의 온도 의존성으로부터 구한 활성화 에너지는 0.17 eV였다.다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.2
• /
• pp.169-172
• /
• 2002

The voltage holding ratio(VHR) and the residual DC property in the in-plane switching (IPS) cells on a polyimide surface was studied. Several IPS cells which have different concentrations of cyano liquid crystals (LCs) were fabricated. We found that the VHR of the IPS cell was decreased with increasing concentration of cyano LCs. Also, the VHR of the IPS cell was increased with increasing specific resistivity of fluorine LCs. The residual DC voltage of the IPS cell by capacitance-voltage (C-V) hysteresis method was decreased with increasing concentration of cyano LCs. The residual DC property of the IPS cell on the rubbed PI surface can be improved by high polarity of cyano LC.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.12
• /
• pp.1033-1038
• /
• 2002

In this study, urethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte (GPE), and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/graphite cells were Prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor consisting of urethane acrylate (UA), hexanediol dimethacrylate (HDDA) and benzoyl peroxide (BPO) had a low viscosity relatively ionic conductivity of the gel polymer electrolyte with UA at room temperature and -20$\^{C}$ was ca. 4.5 $\times$ 10$\^$-3/S$.$cm$\^$-1/ and 1.7 x 10$\^$-3/ S$.$cm$\^$-1/, respectively GPR was stable electrochemically up to potential of 4.i V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/graphite cells showed good a high-rate and a low-temperature performance.