• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.180-184
• /
• 1999

The single crystals of $Mg_{0.15}Zn_{0.85}Te$ and $Mg_{0.15}Zn_{0.85}Te:Co^{2+}$(0.001%) were grown by vertical Bridgman method. Optical absorption properties of this compound were studied. As a result of the optical absorption spectra of $Mg_{0.15}Zn_{0.85}Te$, absorption peaks were related to exciton and the exciton level redshifts with increasing temperature, and temperature coefficient given to the value of $-5.8{\times}10^{-4}\;eV/K$ for the temperature range above 100 K. in the $Mg_{0.15}Zn_{0.85}Te:Co^{2+}$(0.001%) single crystal, the intracenter transitions due to $Co^{2+}$ ions were detected for $A-band:^4A_2(^4F) {\to}^4T_1(^4F),\; B-band:\; ^4A_2(^4F){\to}^4T_1(^4P)$, and the charge transfer transition near the absorption edge was observed in the wavelength range of 500 to 800 nm. According to the crystal field theory and Lucovsky formula, the crystal field parameter, Racah parameter and charge transfer energy were determined.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.157-158
• /
• 2002

A surface hardenable low alloy carbon steel was implanted with medium energy (20 - 50KeV) $N_2^+$ ions to produced a modified hardened surface. The implantation conditions were varied and are given in several doses. The surface hardness of treated and untreated steels were measured using depth sensing ultra micro indentation system (UMIS). It is shown that the hardness of nitrogen ion implanted steels varied from 20 to 50GPa depending on the implantation conditions and the doses of implantation. The structure of the modified surfaces was examined by X-ray photoelectron spectroscopy (XPS). It was found that the high hardness on the implanted surfaces was as a result of formation of non-equilibrium nitrides. High-resolution XPS studies indicated that the nitride formers were essentially C and Si from the alloy steel. The result suggests that the ion implantation provided the conditions for a preferential formation of C and Si nitrides. The combination of evidences from nano-indentation and XPS, provided a strong evidence for the existence of $sp^3$ type of bonding in a suspected $(C,Si)_xN_y$ stoichiometry. The formation of ultra hard surface from relatively cheap low alloy steel has significant implication for wear resistance implanted low alloy steels.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.296-296
• /
• 2016

ITO films doped with a small amount of high-permittivity materials not only retain the basic properties of ITO films but also improve some of their properties. We report the highly conductive and transparent (ITO:Zr) films with various substrate (RT to 300oC) temperatures on glass substrate for the HIT solar cell applications. We observed a decrease in sheet resistance from 36 to $11.8{\Omega}/{\Box}$ with the increasing substrate temperature from RT to 300oC, respectively. The ITO:Zr films showed also lowest resistivity of $1.38{\times}10-4{\Omega}.cm$ and high mobility of 42.37cm-3, respectively. The surface and grain boundaries are improved with the increase of substrate temperature as shown by SEM and AFM surface morphologies. The highly conductive and transparent ITO:Zr films were employed as front electrode in HIT solar cell and the best performance of device was found to be Voc = 710 mV, Jsc = 33.70 mA/cm2, FF = 0.742, ${\eta}=17.76%$ at the substrate temperature of $200^{\circ}C$.

• Journal of Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.167-172
• /
• 2001

A cDNA fragment encoding the chloroplastic fructose-1, 6-bisphosphatase (FBPase) was cloned via PCR from the cDNA library of pea leaves. The cloned cDNA, about 1.05 kbp without signal sequence, was introduced into a pET-28a vector for expression in E. coli strain BL21(DE3)pLysS. The recombinant FBPase was purified through $Ni^+-NTA$ affinity chromatography and characterized. Molecular mass of the monomer was about 42,000. Enzymatic activity of the purified enzyme as the native pea chloroplastic FBPase was the highest at alkaline pH (pH 9.0). The recombinant enzyme was activated by a reducing agent DTT and was insensitive to AMP. The activation energy (Ea) and Arrehenius frequency factor were 42.67 kcal/mol and $2.65{\times}10^{14}/s$, respectively, slightly higher than those of the native enzyme. $K_M$ and $V_{max}$ were $99.98{\mu}M$ and $52.9{\mu}M/min$, respectively, which were comparable with the native enzyme.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.378-381
• /
• 2008

고효율 a-Si:H/c-Si 이종접합 태양전지를 얻기 위해서는 우수한 c-Si wafer 위에 고품질의 비정질 실리콘박막을 통한 heterointerface를 형성하는 것이 매우 중요하다. 이를 달성하기 위해서는 공정중에 오염되기 쉬운 Si wafer 표면 상태를 정확히 검사하고 잘 관리하여야 한다. 본 연구에서는 세정 및 표면산화에 따른 Si wafer 상태를 Spectroscopic Ellipsometry 및 u-PCD를 이용하여 분석하였으며, <$\varepsilon$2> @4.25eV 값이 Si wafer 상태를 잘 나타내고 있음을 확인하였고 세정 최적화 할 경우 그 값이 43.02에 도달하였다. 또한 RF-PECVD로 증착된a-Si:H 박막을 EMA 모델링을 통해 분석한 결과 낮은 결정성과 높은 밀도를 가지는 a-Si:H를 얻을 수 있었으며, 이를 이종접합 태양전지에 적용한 결과 Flat wafer상에서 10.88%, textured wafer 적용하여 13.23%의 변환효율을 얻었다. 결론적으로 Spectroscopic Ellipsometry가 매우 얇고 고품질의 다층 박막이 필요한 이종접합 태양전지 분석에 있어 매우 유용한 방법임이 확인되었다.

• Progress in Superconductivity
• /
• v.11 no.1
• /
• pp.72-77
• /
• 2009

Low temperature scanning laser microscopy (LTSLM) can be used for a two-dimensional display of bolometric response arising from the localized excitation of a sample by the focused laser beam. In this study, the distribution of critical temperature ($T_c$) and critical current density ($J_c$) in YBCO coated conductor were analyzed using LTSLM. For improving the temperature stability, we have modified the system into a double-shielding type. Through the modification, the temperature stability was successfully improved from ${\pm}10mK\;to\;{\pm}2mK$. The superconducting properties of YBCO coated conductors were measured for the sample of a narrow bridge type using wet etching process. The spatial non-uniformity of the ac voltage response, ${\delta}V(x)$, which is proportional to ${\partial}\rho(x,J_B)/{\partial}T$ in the transition temperature region could be observed and displayed in a two-dimensional image.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.575-579
• /
• 2012

Heteroepitaxial InP films have been grown on GaAs substrates to study the effects of the nucleation layer's surface roughness on the epitaxial layer's quality. For this, InP nucleation layers were grown at $400^{\circ}C$ with various ethyldimethylindium (EDMIn) flow rates and durations of growth, annealed at $6200^{\circ}C$ for 10 minutes and then InP epitaxial layers were grown at $550^{\circ}C$. It has been found that the nucleation layer's surface roughness is a critical factor on the epitaxial layer's quality. When a nucleation layer is grown with an EDMIn flow rate of 2.3 ${\mu}mole/min$ for 12 minutes, the surface roughness of the nucleation layer is minimum and the successively grown epitaxial layer's qualities are comparable to those of the homoepitaxial InP layers reported. The minimum full width at half maximum of InP (200) x-ray diffraction peak and that of near-band-edge peak from a 4.4 K photoluminescence are 60 arcmin and 6.33 meV, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.704-704
• /
• 2013

CIGS 박막 태양전지는 I-III-VI족 화합물 반도체로서 직접천이형 에너지 밴드 구조를 가지고 있고, $1{\times}10$ cm의 높은 흡수계수를 가지고 있으며, Ga, Ag, Al을 첨가함으로써 밴드갭을 1~2.7 eV 넓은 범위로 조절가능하다. 본 연구의 목적은 Sputtering 방식과 Cracker cell을 이용한 실험으로 보다 효율적인 방식으로 CIGS 전구체 조성별 특성에 따른 구조와 전기적, 광학적 특성의 효과에 대하여 조사하였다. Cu-In-Ga 전구체는 CuGa(80-20 at.%)과 In(99.0%) target을 사용하여, Sputtering 공정으로 증착하였으며, Cracker cell이 부착된 RTP (rapid thermal processing)를 통하여 셀렌화를 진행하였다. Reservoir zone 온도는 320도, Cracking zone 온도는 900도로 유지하였으며, 진공상태에서 Se이 공급되면서 열처리가 진행되었다.Cu-In-Ga 전구체 구조에서 In의 증착시간을 변화시켜 CIGS 박막에 미치는 영향에 대해 분석하였다. 이때 기판온도는 $500^{\circ}C$로 고정하거나, $240^{\circ}C$ 열처리 후 $500^{\circ}C$에서 열처리하는 두가지를 적용하여 그 영향을 분석하였다. 또한 Selenium이 Cracking zone 온도와 열처리 시간에 따라 미치는 영향의 변화를 조사하였다. 이에 따른 CIGS 박막의 전기적 특성의 변화를 조사하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.322-325
• /
• 2006

The nano/microstructure and mechanical properties of the eutectic regions in thixo and rheo cast A356 alloy parts were investigated using nano/micro-indentation and mechanical scratching, combined with optical microscopy and atomic force microscope (AFM).Most eutectic Si crystals in the A356 alloy showed a modified morphology as fine-fibers, however Si particles of network in eutectic region was formed quickly with aging time increase in thixo-cast. The aging responses of the eutectic regions in both the thixo and rheo cast A356 alloys aged at $150^{\circ}C$ for different times (0, 2, 4, 8, 10, 16, 24, 36, and 72 h) were investigated. Both Vickers hardness ($H_V$) and indentation ($H_{IT}$) test results showed almost the same trend of aging curves, the peak was obtained at the same aging time of 10 h.

• Journal of the Korean Ceramic Society
• /
• v.31 no.7
• /
• pp.795-803
• /
• 1994

Ferroelectric BaTiO3 thin film was produced using BaTi-ethoxide sol. This sol was prepared from BaTi-ethoxide by a partial hydrolysis with ammonia as a basic catalyst and ethylene glycol as a chelating agent. BaTiO3 thin film was prepared from three continuous spin-coating layers of the sol on bare Si(100) wafer at 2500 rpm followed by pyrolysis at $700^{\circ}C$ for 30 min. After the heat treatment, the film was 0.200$\pm$0.010 ${\mu}{\textrm}{m}$ thick and its grain size was 0.059 ${\mu}{\textrm}{m}$. On the other hand, electrical properties were measured for BaTiO3 thin film separately prepared on Au-deposited silicon wafer. The dielectric constant and loss of the BaTiO3 thin film at room temperature was 150~160 and 0.04 respectively, which was measured at 10 kHz and oscillation level of 0.1 V. In the measurements of the dielectric properties at high temperatures, it was observed that the capacitance of the thin film increases steeply, while the dielectric loss reaches maximum around 1$25^{\circ}C$, which corresponds a phase transition from tetragonal to cubic BaTiO3.