• Korean Journal of Food Science and Technology
• /
• v.7 no.2
• /
• pp.61-68
• /
• 1975

This study was conducted (1) to isolate the film-forming yeast from the commercially available soy sauce, (2) to identify the state of soy sauce fermentation by the use of yeasts, (3) to confirm characteristics of yeasts. The result were as follows. 1. These yeast strains in the soy sauce fermentation test showed full fermentation of whole sugar content, reduction of the pure extract and relative reduction in total nitrogen. Soy sauce color was somehow faded to lower the stability of soy sauce. 2. In anti-fungal activity test butylparaben at a higher level 60 ppm., sodium propionate 2,400 ppm, sodium benzoate 800 ppm., menadion 165 ppm, showed their anti-fungal effect, while alcohol did not show the effect in the 3% additive group. 3. The optimum sodium chloride concentration for these strains in the 2% G.Y.P. medium was 5% and optimum temperature was $30^{\circ}C$. The extinction temperature was $62^{\circ}C$ for strain No-1 and No-3, and was $65^{\circ}C$ for No-2 and No-4. 4. The film-forming soy sauce turned out in the gas chromatogram to possess much flavor of low boiling point as compared with the standard. These flavors were considered due to flavor spoilage of the soy sauce. 5. These isolated yeasts were identified Saccharomyces rouxii (film-forming yeast) in the Lodder's taxanomic study.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.479-485
• /
• 2011

Pt-Bi/C catalysts supported on carbon black with various Pt/Bi ratios were synthesized by a reduction method. Chloroplatinic acid hydrate ($H_2PtCl_6{\cdot}xH_2O$) and bismuth (III) nitrate pentahydrate ($Bi(NO_3)_3{\cdot}5H_2O$) were used as precursors for Pt and Bi, respectively. Before loading metal on carbon, heat treatment and pretreatment of carbon black in an acidic solution was conducted to enhance the degree of dispersion. The physical property of the synthesized catalysts was investigated by X-ray diffraction and X-ray photoelectron spectroscopy. The XRD pattern of untreated Pt-Bi/C catalyst showed BiPt and $Bi_2Pt$ peaks in addition to Pt peaks. These results imply that Bi atoms were incorporated into the Pt crystal lattice by Pt-Bi alloy formation. The catalytic activity for methanol oxidation was measured using cyclic voltammetry in a mixture of 0.5 M $H_2SO_4$ and 0.5 M $CH_3OH$ aqueous solution. The addition of proper amount of Bi was found to significantly improve catalytic activity for methanol oxidation. The catalytic activity for methanol oxidation was closely related to the stability between electrode and electrolyte. In order to investigate the stability of catalysts, chronoamperometry analysis was carried out in the same solution at 0.6 V.

• Journal of Hydrogen and New Energy
• /
• v.17 no.4
• /
• pp.440-447
• /
• 2006

Solid polymer electrolyte(SPE) membrane with electrodes embedded on both faces offer unique possibilities for the electrochemical cells like water electrolyzer with fuel cell. The Nafion 117 membrane was used as the SPE, and $Pt(NH_3)_4Cl_2$ and $NaBH_4$ as the electrocatalysts and reducing agent, respectively. The 'impregnation-reduction(I-R) method' has been investigated as a tool for the preparation of electrocatalysts for water electrolyzer by varying the concentration of reducing agent and reduction time at fixed concentration of platinum salt, 5 mmol/L. Pt-SPE electrocatalysts prepared by non-equilibrium I-R method showed the lowest cell voltage of 2.17 V at reduction time, 90 min and with concentration of reducing agent 0.8 mol/L and the cell voltage with those by equilibrium I-R method was 2.42 V at reduction time, 60 min and with concentration of reducing agent 0.8 mol/L. The cell voltage were obtained at a current density $1\;A/cm^2$ and $80^{\circ}C$. In water electrolysis, hydrogen production efficiency by Pt-SPE electrocatalyst is 68.2% in case of non-equilibrium I-R method and 61.2% at equilibrium I-R method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.1
• /
• pp.11-17
• /
• 1987

This paper describes an availability of the teltmeter device made as a trial to measure the under-water noise, and the results of the test. This telemeter device adopts FM-FM system, and its main carrier wave is 146.2MHz. The trans-mission power is about 1w, and the available distance of transmission is 2.5KM. The timer built in the telemeter device controls transmission time and pause time automatically by the R-C time-constant. The former is 30-32 seconds and the latter is 10-12 seconds. The underwater noise in the set net fishing ground and at the breeding tank was measured, and recorded simultaneously on land and at sea with the telemeter device. When the input voltages of the transmitter is 100-300mV, the value of telemetering ambient noise and bio-acoustic underwater noise well agreed with that of the direct measurement. And the teleme-tered underwater noise decreases in proportion the distance between the transmitter and receiver.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.6
• /
• pp.631-642
• /
• 1998

Fall-out particles were collected by the modified British deposit gauges at 35 sampling sites in Suwon area from January to November, 1996. Twenty chemical species (Al. Ba, Cd, Cr, K, Pb, Sb, Zn, Cu, Fe, Ni, V, F-, Cl-, NO3-, 5042-, Na+, NH4+, Mg2+, and Ca2+) were analyzed by AAS and If. The purposes of this study were to estimate qualitatively various emission sources of the fell-out particle by applying multivariate statistical techniques such as factor analysis, multiple regression analysis, and discriminant analysis. During the study, outlier sites were determined by a z-score method. Cl-, Na+, Mg2+, and SO42- were highly correlated due to their common marine related source. Wind speed was the most influential factor for the deposition fluxes of the particle itself and all the chemical species as well. When applying the factor analysis, 8 source patterns were qualitatively obtained, such as marine source, soil source, oil burning source, Cr related source, tire source, Cd related source, agriculture source, and F- related source. As a result of the multiple regression analysis, we could suggest that some chemical compounds may possibly exist in the form of CaSO4, NaN03, NaCl, MgC12, (NH4)2SO4, NaF, and CaCl2 in the fall-out particles. Finally, spatial and seasonal classification study performed by a discriminant analysis showed th.at SO42-, Ca2+, Cl-, and Fe were dominant in the group of spatial pattern; however, SO42-, Cl-, Al, and V were in the group of seasonal pattern.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.5
• /
• pp.87-92
• /
• 1998

Ultr shallow p$^{+}$-n junction with Co/Ti bilayer silicidde contact was formed by ion implantation of BF$_{2}$ [energy : (30, 50)keV, dose:($5{\times}10^{14}$, $5{\times}10^{15}$/$\textrm{cm}^2$] onto the n-well Si(100) region and by RTA-silicidation and post annealing of the evaporated Co(120.angs., 170.angs.)/Ti(40~50.angs.) double layer. The sheet resistance of the silicided p$^{+}$ region of the p$^{+}$-n junction formed by BF2 implantation with energy of 30keV and dose of $5{\times}10^{15}$/$\textrm{cm}^2$ and Co/Ti thickness of $120{\AA}$/(40~$50{\AA}$) was about $8{\Omega}$/${\box}$. The junction depth including silicide thickness of about $500{\AA}$ was 0.14${\mu}$. The fabricated p$^{+}$ -n ultra shallow junction depth including silicide thickness of about $500{\AA}$ was 0.14${\mu}$. The fabricated p$^{+}$-n ultra shallow junction with Co/Ti bilayer silicide contact did not show any agglomeration or variation of sheet resistance value after post annealing at $850^{\circ}C$ for 30 minutes. The boron concentration at the epitaxial CoSi$_{2}$/Si interface of the fabricated junction was about 6*10$6{\times}10^{19}$ / $\textrm{cm}^2$./TEX>.

• KSBB Journal
• /
• v.13 no.6
• /
• pp.693-699
• /
• 1998

The relationship between bioluminescence of immobilized Photobacterium phosphoreum and toxic substances was investigated to monitor toxic substances in aqueous solution. The sodium alginate was used as an immobilization matrix. A bioluminescence intensity was maximum when OD660 for cell concentration were between 1.0 and 1.2 and the biolumescence was stable at the pH range of between 6.0 and 8.0. The optimum concentration of alginate for immobilization was found to be 5.0%(w/v) in which dilution was carried out with 2.5%(w/v) NaCl solution that is an optimum environmental condition for the growth of P. phosphoreum. The bioluminescence intensity responded against the toxic substances was proportional to the concentration and a regression curve were established with linearity by using specific bioluminescence reduction rate and Gamma values. It was also found that the response was very rapid and sensitive. The response with such rapidity and sensitivity is a very important factor for the real time monitoring. The immobilized cells showed higher sensitive response to the toxic substances than free cells.

• Applied Biological Chemistry
• /
• v.50 no.1
• /
• pp.48-52
• /
• 2007

Yogurt base was prepared from skim milk supplemented with 0.2-1.0% (w/v) garlic powder and fermented with lactic acid bacteria (the mixed strain of Lactobacillus acidophilus, Bifidobacterium longum and Streptococcus thermophilus) at 40$^{\circ}C$ for 18 h. Quality characteristics of the prepared yogurt were evaluated for acid production (pH and titratable acidity), number of viable cells, viscosity and sensory properties. The addition of garlic powder inhibited the growth of lactic acid bacteria and decreased the acid production. After 18 h incubation, titratable acidity of garlic yogurt was 1.28-1.08% and was lower than that (1.35%) of yogurt made with only skim milk. However, the viscosity of yogurt was remarkably increased by the addition of garlic powder. The sensory score of yogurt added with 0.2% garlic powder was similar to ordinary yogurt in flavor and overall acceptability. According to sensory score and fermentation characteristics, the optimum concentration of garlic powder was around 0.2%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.198-198
• /
• 2010

산화물 반도체는 넓은 밴드갭을 가지고 있어 가시광에서 투명하며 높은 이동도로 디스플레이 구동 회로 집적에 유리하다. 또한 가격 및 공정 측면에서도 기존의 Si 기판 소자에 비해 여러 장점을 가지고 있어 차세대 디스플레이의 핵심 기술로 산화물반도체에 대한 관심이 높아지고 있다. 본 연구는 RF 동시 스퍼터링법을 이용하여 Zn-Sn-O 박막을 제조하고, 그 전기적, 광학적, 구조적 특성에 대해 조사하였다. 일정한 증착 온도($100^{\circ}C$)에서 ZnO와 $SnO_2$ 타켓의 인가 파워를 조절하여 Sn/(Zn+Sn) 성분비가 약 40~85%인 Zn-Sn-O 박막을 제조하였다. Sn 함량이 증가할수록 박막의 비저항은 약 $2{\times}10^{-1}$ (Sn 45%)에서 약 $2\;{\times}\;10^{-2}\;{\Omega}{\cdot}cm$ (Sn 67%)까지 감소하다가 다시 증가하는 경향을 보였다. 이 때 캐리어 농도는 $3\;{\times}\;10^{18}$에서 $4\;{\times}\;10^{19}\;cm^{-3}$으로 증가하였으며, 이동도는 11에서 $8\;cm^2/V{\cdot}s$로 약간 감소하였다. XRD분석결과, 제조된 모든 Zn-Sn-O 박막은 비정질 구조를 가짐을 확인하였다. 투과율은 박막 내 Sn함량 증가에 따라 감소하나 모든 시편이 약 70%이상의 투과도를 나타내었다. Zn-Sn-O 박막의 Ga 도핑 영향을 확인하기 위해 ZnO 타켓 대신 갈륨이 5.7 wt.% 도핑된 GZO 타켓을 사용하여 동일한 공정조건에서 박막을 제조하였다. Ga이 첨가된 Zn-Sn-O 박막은 구조적 특성과 광학적 특성에서는 큰 차이를 보이지 않았으나, 전기적 특성의 뚜렷한 변화가 관찰되었다. Sn 함량이 45%인 Zn-Sn-O 박막의 경우, 캐리어 농도가 $3.1\;{\times}\;10^{18}$에서 Ga 도핑 효과로 인해 $1.7\;{\times}\;10^{17}\;cm^{-3}$으로 크게 감소하고 이동도는 11에서 $20\;cm^2/V{\cdot}s$로 증가하였다. 따라서 본 연구는 Zn-Sn-O 비정질 박막에 Ga을 도핑함으로써 산화물 반도체재료로서 요구되는 물성을 만족시킬 수 있다는 가능성을 제시하였다.

• Korean Journal of Pharmacognosy
• /
• v.5 no.2
• /
• pp.111-124
• /
• 1974

The radioactive compound sodium $acetate-U-C^{14}\;(C^{14}-acetate)$ was administered to two- and four-year-old July and September American ginseng (Araliaceae, Panax quinquefolium L.) plants and cuttings. The $C^{14}-acetate$ uptake was approximately 99%. The autoradiochromatograms suggest that the saponins isolated by preparative thin-layer chromatography contained impurities, especially those isolated from the leaf and stem extracts. The root and fruit methanol extracts yielded relatively pure saponins. The large amounts of panaquilin B and its proximity to panaquilin C on preparative thin-layer plates resulted in some admixing. The average concentration (% plant dry weight) of semi-purified saponins were high in the leaves (13.8%), as compared to fruits (9.8%), stems (7.9%) and roots (6.3%). The average percentage of $C^{14}-acetate$ incorporation into panaquilins was 4.8%. The average percentage of $C^{14}-acetate$ incorporation into panaquilins B and C was higher (1.40% and 1.13%, respectively) than that into panaquilins C, (d), G-1 and G-2 (0.75%, 0.65%, 0.13% and 0.53%, respectively). Panaquilin synthesis may be depending upon the part, collection period and age of the plant. The average percentage of $C^{14}-acetate$ incorporation into panaquilin B is high in roots (0.58%) and stems (0.48%); that into panaquilins C and (d) high in leaves (0.40% and 0.45%, respectively); and that into panaquilin E high in roots and leaves (0.55% and 0.50%, respectively). Panaquilin G-2 was synthesized in all parts of plants. The panaquilins appear to be biosynthesized more actively in July than September (exception-panaquilin G-1). Panaquilins B, C and G-1 may be biosynthesized more actively in four-year-old plants and panaquilins (d) and E more actively in two-year-old plants. The results from expectance with cuttings suggest that the panaquilins are synthesized de novo in the above-ground parts of ginseng plants, and that panaquilin G-1 may be synthesized de novo in the leaf. It is known from the tissue culture studies that panaquilins are produced by leaf, stem and root callus tissues and cailus-root cultures of American and Korean ginseng plants. Panaquilins may actively be synthesized de novo in most any cell or organ of the ginseng plants. It was verified that $C^{14}-acetate$ was incorporated into the panaxadiol portions of the panaquilins of two-year-old plants (sp. act. 0.56 mmcCi/mg) and four-year-old plants $(sp.\;act.\;0.54\;m{\mu}Ci/mg)$.