• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.675-686
• /
• 2007

Statement of problem: Titanium nitride(TiN) coatings are the most general and popular coating method and used to improve the properties of metallic surface for industrial purposes. When TiN coating applied to the abutment screw, frictional resistance would be reduced, as a results, the greater preload and prevention of the screw loosening could be expected. Purpose: The purpose of this study was to investigate mechanical properties of TiN coated film of various coating thickness on the titanium alloy surface and to evaluate proper coating thickness. Material and method: 95 Titanium alloy (Ti-6Al-4V) discs of 15 mm in diameter and 3 mm in thickness were prepared for TiN coating and divided into 7 groups in this study. Acceding to coating deposition time (CDT) with TiN by using Arc ion plating, were divided into 7 groups : Group A (CDT 30min), Group B (CDT 60min), Group C (CDT 90min), Group D (CDT 120min), Group E (CDT 150min), Group F(CDT 180min) and Group G (no CDT) as a control group. TiN coating surface was observed with Atomic Force Microscope(AFM), field emission scanning electron microscopy(FE-SEM) and examined with scratch tester, wear tester. Result: 1. Coating thickness fir each coated group was increased in proportion to coating deposition time. 2. Surface of all coated groups except Group A was homogeneous and smooth. However, surface of none coated Group G had scratch. 3. Adhesion strength for each coated group was increased in proportion to coating deposition time. 4. Wear resistance for each coated group was increased in proportion to coating deposition time. 5. Surface roughness in Group A, B, C was increased in proportion to coating deposition time. But, surface roughness in Group D, E, F was showed decreased tendency in proportion to coating deposition time. Conclusion: According to coating deposition time, mechanical properties of TiN coated film were changed. It was considered that 120 minutes coating deposition time ($1.32{\mu}m$ in coating thickness) is necessary.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.1
• /
• pp.37-45
• /
• 1994

$(NH_4)_{4.5}[H_{3.5}{\alpha}-PtMo_6O_{24}]{\cdot}1.5\;H_2O(A),\;(NH_4)_4[H_4{\beta}-PtMo_6O_{24}]{\cdot}1.5\;H_2O(B),\;and\;K_{3.5}[H_{4.5}{\alpha}-PtMo_6O_{24}]{\cdot}3\;H_2O(C)$ have been synthesized and their molecular structures have been also determined by single-crystal X-ray diffraction technique. The space groups, unit cell parameters, and R factors are as follows: Compound A, monoclinic, $A_{2/a}$, a= 19.074 (3), b=21.490 (3), c=15.183 (2) ${\AA};\;{\beta}$=109.67 (1) ${\AA}$; z=8; R=0.075($IF_0I>4{\sigma}(IF_0I);$ Compound B, triclinic, P$bar{1}$, a=10.776 (2), b=15.174 (4), c=10.697 (3) ${\AA};\;{\alpha}$ =126.29 (2), ${\beta}$=111.55 (2), ${\gamma}$=93.18 (2) ${\AA}$; Z=2; R=0.046($IF_0I>3{\sigma}(IF_0I);$): Compound C, triclinic, Pl, a=12.426 (2), b=13.884 (2), c=10.089 (1) ${\AA}$; ${\alpha}$=102.59 (2), ${\beta}$=110.73 (1), ${\gamma}$=53.93 (1) ${\AA}$; Z=2; R=0.074 ($IF_0I>3{\sigma}(IF_0I)$. Compounds A and C contain the well-known Anderson structure (planar structure) heteropoly oxometalate having approximate $bar{3}_m(D_{3d})$ symmetry, while compound B contains the bent structure heteropoly oxometalate having appproximate $2_{mm}(C2_v)$ symmetry. The bent structure and the planar one are geometrical isomers. These compounds are rot only novel heteroply molybdates containing platinate(IV) but also the first example of geometrical isomerism in the hexamolybdoheteropoly oxometalates. That isomerization surprisingly occurred because of the change of only 0.5 non-acidic hydrogen atom attached to the polyanion such as $[H_{3.5}{\alpha} -PtMo_6O_{24}]^{4.5-}{\to}[H_4{\beta}-PtMo_6O_{24}]^{4-}{\to}[H_{4.5}{\alpha} -PtMo_6O_{24}]^{3.5-}$. It seems that the gradual protonation of the polyanion plays an important role in that isomerism. These heteropolyanions form dimers by strong hydrogen bonds between two heteropolyanions in the respective crystal system.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.348-355
• /
• 2024

A current source capable of stably supplying current as a measurement medium is required in order to measure and test important facilities that require large-scale measurement current, such as a control element drive mechanism control system(CEDMCS), in case of dismantling a nuclear power plant. However, it can provides only voltage power as a source, not current, although direct voltage controlled constant current source is essential to test major equipment. That kind of source is not available to supply stable constant current regardless of load variation. It is just voltage supplier. Developing current source is not easy other than voltage source. Very large-scale current source up to ampere class more than such ten times of normal current is inevitable to test above mentioned equipment. So, we developed large-scale current source which is controlled by input DC voltage and supplies constant stable current to object equipment according to this requirement. We measured and tested nuclear power plant equipment using given real site data for a long time and afforded long period load test, and then proved its validity and verification. The developed invetion will be used future installed important equipment measuring and testing.

• Journal of Chest Surgery
• /
• v.35 no.10
• /
• pp.712-723
• /
• 2002

Substantial alterations in cerebral blood flow(CBF) are known to occur during cardiopulmonary bypass(CPB). Many investigators have speculated that these changes may be responsible for both minor and major cerebral damages after CPB. More recently, these changes in CBF have been observed to be intimately related to the arterial carbon dioxide tension(Pa$CO_2$) maintained during CPB. The present study was prospectively designed to investigate the clinical effects of normocapnic and hypercapnic CPB on the cerebral oxygen metabolism in cardiac surgery Material and Method: Thirty-six adult patients scheduled for elective cardiac surgery were randomized to either normocapnic group (Pa$CO_2$35~40 mmHg, n＝18) or hypercapnic group(Pa$CO_2$, 45~55 mmHg, n＝18) with moderately hypothermic nonpulsatile CPB(nasopharyngeal temperature of 29~3$0^{\circ}C$). In each patient, middle cerebral artery blood flow velocity( $V_{MCA}$), cerebral arteriovenous oxygen content difference (C(a-v) $O_2$), cerebral oxygen extraction(COE), cerebral metabolic rate for oxygen(CMR $O_2$), cerebral oxygen transport( $T_{E}$ $O_2$), $T_{E}$ $O_2$/CMR $O_2$ ratio, cerebral desaturation(internal jugular bulb blood oxygen saturation $\leq$ 50%), and arterial and jugular bulb blood gas were evaluated throughout the operation. Postoperative neuropsychologic complications were assessed in all patients. All variables were compared between the two groups. Result: VMCA(169.13 $\pm$ 8.32 vs 153.11 $\pm$8.98%), TE $O_2$(1,911.17$\pm$250.14 vs 1,757.40$\pm$249.56), $T_{E}$ $O_2$,/CMR $O_2$ ratio(287.38$\pm$28.051 vs 246.77$\pm$25.84), $O_2$ tension in internal jugular bulb (41.66$\pm$9.19 vs 31.50$\pm$6.09 mmHg), and $O_2$saturation in internal jugular bulb(68.97$\pm$10.96 vs 58.12$\pm$12.11%) during CPB were significantly lower in normocapnic group(p＝0.03), whereas hypercapnic group had lower C(a-v) $O_2$(3.9$\pm$0.3 vs 4.9$\pm$0.3 mL/dL), COE(0.3$\pm$0.03 vs 0.4$\pm$0.03), CMR $O_2$(5.8 $\pm$0.5 vs 6.8$\pm$0.6), and arterial blood pH(7.36$\pm$0.09 vs 7.46$\pm$0.07, p＝0.04) during CPB. Hypercapnic group had lower incidence of cerebral desaturation than normocapnic group(3 vs 9 patients, p=0.03). Duration of the neuropsychologic complication(delirium) were shorter in hypercapnic group than in normocapnic group(36 vs 60 hrs, p＝0.009). Conclusion: These findings suggest that hypercapnic CPB may have salutary effects on the cerebral oxygen metabolism and postoperative neurologic outcomes in cardiac surgery.surgery.

• Journal of Acupuncture Research
• /
• v.18 no.4
• /
• pp.68-81
• /
• 2001

Herniated lumbar intervertebral disc(H.I.V.D) is the most common reason causing low back pain and leg radiating pain. Objective : The purpose of this report is to observe the effects of oriental medical conservative treatment in the different herniated type. Methods : We investigated 30 patients suffering from low back pain with sciatica which were admitted to Taejon Cheonan O. M. hospital from Nov 1, 2000 to Apr 30, 2001. 30 patients had a diagnosis of herniated lumbar interver tebral disc by Lumbar-C.T and Lumbar-M.R.I. we treated 30 patients by oriental medical conservative treatment (Ex: acupuncture, herb-med, physical theraphy, bed-rest, etc.) Results : 1. The mean hospitalization of patients was 21.1 days. that in the bulging type was l4days, protruded type 21days, mixed type 27days, extruded type 30days. that shows the less herniation of lumbar intervertebral disc, the mean hospitalization was more short. 2. In the distribution of the clinical symptoms admitted at that time, low back pain, leg radiating pain were showed in the all types(29patients, 96.6%). and sensory disorder, muscle powerlessness were showed least in the bulg ing type(0%, 37.5%), but that were showed most in the extruded type(50%,75%). 3. In the result of treatment due to clinical syptoms, bulging type was more execellent than any other other types. 4. The less herniation of lumbar intervertebral disc, angle of straight leg raising test was higher. In the result of treatment due to angle of straight leg raising test, bulging type was more execellent than any other other types. 5. In the distribution of physical. test, positive case in the Peyton sign, Ankle Dorsiflexion were showed least in the bulging type(25%, 12.5%), but that were showed most in the extruded type(100%, 75%). 6. In the result of treatment due to physical.test, bulging type was more exec ellent than any other other types. 7. The efficacy of total treatment was 90%(when we set a standard things more than fair), that in the bulging type was 100%, protruded 92%, mixedtype 80%, extruded type 75%. Bulging type had a more remakable effectsthan any other types. Conclusions : The less herniation of lumbar intervertebral disc, clinical syptoms were slighter, physical. test were better, and efficacy of oriental medical conservative treatme nt was remakable high.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.1
• /
• pp.69-74
• /
• 1994

The relationship of thyroid status and certain blood biochemical constituents with body weight gains (ADG) and age (13 to 96 weeks) was studied in Holstein Friesian ${\times}$ Hariana ($1/2F{\times}1/2H$) crossbred male calves by assessing their plasma triiodo thyronine ($T_3$), Thyroxine ($T_4$), sodium, potassium, total proteins and cholesterol level at two energy levels. Body weight gains (ADG) were higher during the 50 to 72 weeks of age and declined thereafter, the plasma $T_3$ conc. was aignificantly (p < 0.01) higher during this period compared to all other periods. There was no significant variation due to energy level. Overall mean plasma $T_3$ conc. was $1.19{\pm}0.12ng/ml$. Plasma $T_4$ conc. did not show any significant variation either between the different age periods or between the two energy levels. The mean plasma $T_4$ conc. was $37.34{\pm}1.32ng/ml$. The plasma sodium and potassium concentration did not vary significantly due to energy levels. But amongst the different age periods, sodium concentration was highest ($147.70{\pm}2.29mEq/L$) during 49-60 weeks of age and lowest ($134.70{\pm}1.78mEq/L$) during 13-24 weeks, where as for potassium concentration changes were nonsignificant. There was very little variation amongst other periods. Plasma protein level was higher at 100% energy level than at 75%. Amongst the different age period, it was significantly lower ($6.44{\pm}0.36$) during 13 to 24 weeks of age than at 37 to 48 weeks of age ($7.14{\pm}0.11$). Plasma cholesterol values were higher for 75% energy level than that of 100%. Between the periods it was highest during 61 to 72 weeks of age and the difference amongst the age period were highly significant.