• 대한정형외과스포츠의학회지
• /
• 제1권1호
• /
• pp.31-36
• /
• 2002

목적: 운동중에손상당한전방십자인대에대해아킬레스동종건을이용한재건술시행후임상적결과와운동력회복정도를조사하였다. 대상및방법: 전방십자인대손상을입은5년이상스포츠활동을한아마추어로1주일에3회이상1회에2시간이상운동을하였던환자에서아킬레스동종건을이용하여관절경하에전방십자인대재건술을시행한환자중1년이상추시가능한56명에대하여 외상 전의 스포츠활동으로의 회복여부를 주관적, 객관적 지표인Lysholm Knee Score, Tegner activity Score, Telos stress arthrometer, modified Feagin Scoring System 등을분석하였다. 평균연령은25세(18 $\~$49세), 평균추시기간은15개월(12개월 $\~$19개월)이었다. 손상시운동은축구가29명, 농구14명, 배드민턴5명, 테니스3명, 스쿼시2명, 기타3명이었다. 결과: Lysholm Knee Score는술전60점에서88.2으로, Telos arthrometer를이용한스트레스사진상술전7.1 mm에서술후2.3 mm로향상된결과를보였다. Modified Feagin Scoring System상양호이상이52례(88.1$\%$)이었다. 운동력의회복평가에서Tegner 6 단계인레크레이션스포츠가가능한경우가12명, Tegner 5단계20명, Tegner 4단계20명, Tegner 3단계3명이었다. 결론: 아킬레스동종건을이용한전방십자인대재건술후임상적결과는좋은결과를보이고있으나, 외상전의스포츠활동으로의복귀는충분하지않음을보여주고있어정상적인스포츠활동을위해많은연구가필요할것으로사료된다.

• Radiation Oncology Journal
• /
• 제22권3호
• /
• pp.225-233
• /
• 2004

목적: 유방의 방사선조사 시 결손조직을 보상하고 방사선 균질선량 분포를 얻기 위해 통상적으로 physical wedge를 사용하여 왔다. Physical wedge 사용 시 주변의 폐, 심장, 반대편 유방, 피부에 조사되는 방사선량의 증가에 따른 급성, 만성 부작용의 증가가 문제시 된다. 본 연구에서는 일반적인 Physical wedge와 virtual wedge를 비교하여 동측 유방, 반대편 유방, 폐, 심장, 주변연부조직에 미치는 선량분포의 개선점을 알아보고자 하였다. 재료 및 방법: Solid water phantom을 이용하여 Dmax와 10 cm 깊이에서 physical wedge와 virtual wedge 사용시 조사야 주변선량을 비교하였다 Humanoid Phantom (Anderson Rando Phantom)을 사용하여 Lt. breast의 tangential Irradiation 시 physical wedge와 virtual wedge 사용에 따른 동측 유방선량과 피부선량, 반대편 유방선량과 반대편 유방의 피부선량, 주변 연부조직선량, 동측 폐선량 및 심장에 조사되는 선량을 TLD를 이용하여 비교하였으며 Helax 5.0 RTP system을 이용한 compute planning으로 선량분포 및 관심부의 DVH를 비교하였다. 이때 virtual wedge와 physical wedge의 사용에 따른 총조사 시간을 측정하였다 또한 7명의 유방암 환자에서 virtual wedge, physical wedge 사용에 따른 동측 유방 피부선량, 반대편 유방 피부선량, 조사야에서 1.5 cm 떨어진 주변 선량을 측정하여 비교하였다. 결과: Virtual wedge는 15$^{\circ}$, 30$^{\circ}C$, 45$^{\circ}C$, 50$^{\circ}C$ 모두에서 physical wedge에 비해 주변선량이 감소하였으며 방사선조사 시간을 53$\~$55$\%$ 감소시켜 유용한 결과를 나타냈다. 15$^{\circ}C$, 30$^{\circ}C$ wedge를 사용한 Humanoid Phantom의 TLD 측정에서도 virtual wedge에서 반대편 유방선량은 1.35$\%$, 2.55$\%$ 감소하였고, 반대편 유방 피부선량은 0.87$\%$, 1.9$\%$ 감소하였다 또한 동측 폐선량은 2.7$\%$, 5.0$\%$, 심장선량은 0.95$\%$, 2.5$\%$ 감소하였다. 또한 조사야 경계부위의 선량은 1.8$\%$, 2.33$\%$ 감소하였으며 동측 유방의 피부선량은 2.4$\%$, 4.58$\%$ 증가하였다. Helax 5.0 RTP system을 이용한 DVH analysis에서 동측 유방내 선량균질정도는 physical wedge와 virtual wedge에서 차이 없이 유사하였다 결론: 유방암치료에서 virtual wedge는 통상 사용하는 physical wedge에 비하여 주변 연부조직선량, 반대편 유방선량, 동측 페선량 및 심장선량을 감소시켜 급, 만성 방사선 부작용의 위험을 감소시킬 수 있는 임상적으로 매우 유용한 방법이며 또한 방사선조사시간을 단축시킴으로써 선형가속기의 부하를 줄일 수 있다.

• 한국인구학
• /
• 제11권2호
• /
• pp.54-66
• /
• 1988

I. Introduction Since the 1970's drug abuse among young people has increasingly become a social problem in Korea. In the 1980's, drug abuse, especially glue sniffing, has become the cause of many unfortunated incidents resulting in harm to others as well as the abusers themselves. Taking into consideration of the seriousness of this problem, the Republic of Korea National Red Cross initiated a nation-wide research programme, to understand the present situation and to raise the level of public awareness. The goal of this research was to begin a nation - wide campaign against drug abuse. The research team was composed of the Advisary Committee members and the staff of the Youth Department of the Republic of Korea National Red Cross. The data were collected in February 1988 with the collaboration of the staff and volunteers in the local Chapters. The respondents were allocated nation-wide by the quota sampling method. The questionnaires were distributed to the respondents in three groups :2, 700 to junior and senior high school students, 605 to working youths, and 916 to delinquent youths. A total of 4, 221 questionnaires were collected. II. Characteristics of the Respondents The respondents in each group were selected evenly from rural and urban areas. The general characteristics of the respondents can be described as follow: in case of students, the proportions between male and female respondents, and between senior high school and junior high school students were almost evenly distributed. In case of working youths, the proportion of females (80.5%) was higher than those of the students and the delinquents groups. Delinquent youths were defined as those currently being under custody of the centers for juvenile delinquents. Of this number, 38.8% and 68.2% were junior and senior high school drop-outs respectively. The majority of them (92.6%) were male. As for the family background of the respondents, the proportion of those residing in poverty - stricken areas, and the proportion of those from broken families were higher in case of working youths and delinquent youths than those in case of students. III. Present Patterns of Drug Abuse The following summarizes the presents of drug abuse, as tabulated from the results of the survey. 1. Smoking The percentage of youths who smoke was 36% in the student group, 32% m the working youths group, and 94.4% in the delinquent youths group. 2. Alcohol 50.3% of students, 71.6% of working youths, and 93.3% of delinquent youths has experienced drinking alcohol beverages. 3. Tonic: non - alcoholic, caffeinated beverages popular in Korea and Japan The percentage of those who have used tonic at least once was over 90% in all of the three groups. 4. Sedative About 70% of each group has used sedative with the proportion of working youths use higher than those in other groups. 5. Stimulants Those who have used stimulants comprised around 15% in each group. 6. Tranquilizers Somewhat less than 5% of students and working youths, and 28% of delinquent youths, have used tranquilizers. 7. Hypnotics The users of hypnotics amounted to 0.4% of students, 2.6% of working youths and 7.1% of delinquent youths. 8. Marihuana Those who have used marihuana indicated 0.7% of students, 0.8% of working youths, and 13% of delinquent youths. 9. Glue-sniffing The percentage of glue-sniffing was 3.7%, 5% in the students group and in the youths group respectively, but the proportion was unusually high, at 40.7% in the delinquent youths group. From the results of the survey the present situation of drug abuse in Korea can be summarized as follows: 1. A high percentage of Korean youths have experienced smoking cigarettes and drinking alcoholic beverages. 2. Tonics (non - alcoholic, caffeinated beverages), antipyretic analgesics and stimulants quite regularly used. 3. Tranquilizers, hypnotics, marihuana and glue-sniffing are more widely used among delinquent youths than the other youths. From this fact, there exists a correlation between drug abuse and juvenile delinquency. IV. Time-series Analysis of the First Experience of Drug Abuse and Deviant Behaviour The respoundents were asked when they were first exposed to drugs and when they committed deviant acts. By calculating the average age of each experience, the following pattern was found (See Figure 1). Youths are first exposed to drugs by abuse of tonic(non - alcoholic, caffeinated beverages). At the age of 13, they amoke cigarettes, the use of antipyretic analgesics begins at 14 year old, while at the age of 15, they use tranquilizers, and at 16 hynotics. The period of drug abuse which starts from drinking caffeinated beverages and smoking cigarettes and ends in the use of hypnotics takes about three years. During this period, other delinquent behaviours begin to surface, that is, at the age of 13 when smoking cigarettes begins, the delinquent behaviour pattern starts with truancy. Next, they start taking money from others by using physical force. Prior to the age of 15, they are suspended from school, become hostile to adults, begin running away from home, and start using stimulants and alcohol. Soon they become involved even in glue-sniffing and in the use of marihuana. At the age of 15, they begin to see adult videos and carry weapons. Sexual promiscuity and usage of tranquilizers follows the viewing of adult videos. Consequently, by the time they reach the age of 16, they visit drinking establishments, and are picked up by police for committing delinquent acts. And finally, they come to use hypnotic - type drugs. From the above descriptions, drug abuse can be assumed to have a close correlation with delinquent behaviour. V. Social Factors Related to Drug Abuse As for the Korean youths, glue-sniffing is found to he related to aggressive delinquency, in such cases as run - aways, being picked up by the police, and taking money by force. Smoking cigarettes and drinking alcohol is found to be related to seeing adult videos and visiting drinking establishments. Hypnotics and marihuana were found to be representive of drugs which are related to degenerational delinquency, irrespective of social delinquency. The social factors connected with these drug abuse are as follows: 1. Individual factors Male students were more heavily involved in the usage of drug than females. Youths who do not attend church were more likely to be involved in drugs than those who attend. 2. Family factors The youths who were displeased with their mothers smoking and those who thought their parents did not love each other, or those whose parents had used drugs without prescription, were more likely to he drug users. 3. School factors Those youths who found school life boring, were unsuccessful in their studies, spend most of their time with friends, feel their teachers smoke too much, those who had a positive perception of their teachers smoking were likely to he drug users. To sum up, drug abusers depend on the influence of their parents, teachers and peers. IV. Reasons for Drug Abuse Korean students have mainly used drugs to release stress (42.8%), to stay awake (19.7%), and because of the easy accessibility of drugs( 16.6%). Other reasons are due to their ignorance of the side effects of the drugs (3.6%), natural curiosity (4.2%), and to increase strength(3.O%). From the above facts, the major reasons for drug abuse among Korean youths are to release stress and to stay awake in order to prepare exams. Furthermore, since drugs are readily available, we can conclude that drug abuse is caused by the school system(such as entrance exams) in Korea. VII. Conclusion Drug usage among Korean youths are relatively less common than those of western youths. In some cases, such as, glue-sniffing and use of stimulants, the pattern of drug abuse is found. Moreover, early drug abuse is evident, and it has a close connection with deviant behaviour, resulting in juvenile delinquency. Drug abuse cannot be attributed to any one social factor. Specifically, drug abuse depends on parents, peers, teachers and other members of the community, and also is influenced by social institutions such as the entrance exam system. Every person and organization concerned with youth must participate collectively in restraining drug abuse. Finally, it is suggested that social agencial working for youth welfare should make every effort to tackle this serious problem confronted by the Korean youths today.

• 대한핵의학회지
• /
• 제32권6호
• /
• pp.490-496
• /
• 1998

목적: 본 연구의 목적은 MELAS 증후군과 미토콘드리아 근육병의 뇌 SPECT 소견을 알아보고 SPECT 소견과 자기공명영상 소견을 비교 분석하여 MELAS증후군의 특징적인 영상 소견을 찾아보고자 하였고 MELAS 증후군에 있어서 뇌 SPECT의 역할을 평가해 보고자 하였다. 대상 및 방법: 뇌졸중 유사 증상이나 경련 또는 발달 지연을 주소로 하였고, 혈청 또는 뇌척수액의 lactic acid치가 상승되어 있는 1세에서 25세의 5명의 환자를 대상으로 하였고 남녀비는 4:1이었다. 모든 환자에서 Tc-99m ECD를 이용한 뇌혈류 단일광전자방출 전산화 단층촬영술(SPECT)와 자기공명영상을 시행하여 영상 소견을 분석하였다. 결과: 자기공명영상에서는 주로 두정엽(4/5)과 후두엽(4/5), 그리고 기저핵(1/5)에 백질과 회백질에 증가된 T2 신호강도를 나타내었는데, 특정한 혈관 영역에는 부합하지 않는 병변의 분포양상을 보였다. SPECT상에서는 자기공명영상에서 이상소견을 보인 모든 부위에서 관류 저하를 보였으며 추가적으로 두정엽(1예), 측두엽(1예), 전두엽(1예), 기저핵(1예)와 시상(2예)에서도 감소된 Tc-99m ECD의 섭취를 나타내어서, 자기공명영상과 SPECT에서 이상 소견을 보인 수를 비교하면 자기공명영상에서 나타난 해부학적인 이상소견보다 SPECT에서 보인 관류 저하가 더 광범위하였다. 결론: MELAS 증후군의 SPECT에서는 특정한 혈관 영역에는 부합하지 않는 두정엽과 후두엽, 기저핵, 시상, 측두엽등의 관류저하를 보여 주었는데, 본 연구의 여러 제한점으로 인하여 MELAS 증후군에서만 나타나는 특징적인 소견이라고 할 수는 없었다. 자기공명영상에서 상응하는 이상 소견이 없이 SPECT에서만 관류 저하를 보이는 경우의 중요성은 좀 더 많은 수의환자를 대상으로 한 연구를 통해 평가되어져야 할 것으로 생각한다. 나타내었다.속도를 향상시킬 수 있었다. 정상인의 뇌영상에 대해 위치 정합을 실시한 결과 평균 거리 오차는 2mm 이하였다. 가중정규화 방법을 사용하였을 때 합성된 영상의 정성적인 식별 명확도가 향상하였다. 결론: 견실한 PET 영상 경계점 추출과 거리지도를 이용한 계산 속도의 향상을 통해 뇌 PET과 MR 영상 합성기법의 성능을 개선할 수 있었으며 이를 이용하며 개발한 영상정합 프로그램은 임상 환경에서 유용하게 사용될 수 있을 것이다.은 환자군을 대상으로 한 추가 연구가 필요한 것으로 판단된다.07% ID/g 이하로 매우 낮았다. 결론: 이실험에서 표지한 Re-188 황 교질은 표지효율과 안정성이 높고 임상적으로 방사선 활액막 절제술 등에 사용할 수 있을 것으로 생각한다.}I$] 또는 [$^{131}I$]OMIMT는 종양의 아미노산 대사 영상제제로 이용될 수 있으며 앞으로 이에 대한 임상연구가 필요할 것으로 생각되었다.>$R_A,\;R_v$의 결과간에 좋은 상관관계를 가졌다. 따라서 이러한 약역학 컴퓨터시뮬레이션이 SPECT 영상을 이용한 도파민 운반체 또는 수용체 정량분석을 최적화하는데 매우 유용할 것으로 생각된다.TEX>-CIT SPECT는 파킨슨병의 조기진단 및 진행 추적에 임상적으로 유용할 것으로 판단된다., SCC 4예, AC 1예)였으며, 11예 중 9예(81.8%)에서 방사선학적 검사결과와 Tc-99m MIBI섭취율의 변화가 일치하였다. 결론적으로, Tc-99m MIBI SPECT는 폐암병소의 국소화 및 방사선치료 효과의 판정에 어느정도 유용하리라 사료되었다.냈고 4명에서는 low CBD obstruction을 나타내었으며 후에 CBD stone, CBD carcinoma, gall bladder Ca.의 porta hepatis 전이 및 clonorchis worms의 cluster에

• 한국작물학회지
• /
• 제26권1호
• /
• pp.56-68
• /
• 1981

재래종의 수집종 가운데서 선접된 다종다벽계통 (약칭 : MET)의 일반적 대성을 분석하여 청예용 옥수수의 육종을 위한 기초자료를 얻고져 수행한 시험결과를 요약하면 다음과 같다. 1. 주요 특성들의 환경변이와 유전변이를 추정하였던 바 MET계통의 분벽성, 개체당 이삭수(수수)는 환경변이보다도 유전변이가 큰 것으로 추정되었다. 개체당 건물중 및 건엽중 등도 유전변이가 커 MET 계통의 유전적 특성으로 확인되었다. 그러나 건기중, 입중 등은 환경변이가 컸었다. 2. 몇가지 특성의 평균치를 두 품종간에 비교하면 다음과 같다. 가. 분벽기수 및 이삭수 : 수원 19호는 환경변이 (파종기, 재식밀도)에 관계없이 분벽기이 없고 이삭수도 변하지 않았으나 MET계통은 분벽기수 및 이삭수가 크게 달라졌다. 나. 개체당 건물중, 건엽중 및 건기중 : 파종기나 재식밀도에 따라 다르기는 하지만 MET계통의 개체당 건물이 수원 19호보다 비교적 높았으며 건엽중은 월등히 높았고(1.5-2.5)배 개체당 건기중도 비교적 높았다. 다. 개체당 입중 및 입중 대 건기엽중비 : MET계통의 개체당 입중은 수원 19호보다 5～40% 낮았다. 따라서 MET계통의 입중 대 건기엽중비가 평균 35%였고 수원 19호는 41%로서 높았다. 3. MET계통은 파종 2주 후부터 분벽하기 시작하여 3 ～ 5일간격으로 다음 분벽이 되었으며 생육초기에 왕성하여 최고 6~7개에 이르나 2~3개만이 유효기으로 신장되였다. 유효기비율은 소식일수록 높았다. 분벽의 발생은 주기의 최하절읍부터 시작되는 데 하부절위가 짧아 한절위에서 분벽이 여러개 발생하는 것처럼 보였다. 제 1, 2분벽기의 기장은 주기의 것에 비하여 10cm 정도씩 짧았으며 재식밀도에 따라 주기 및 제일, 이분벽기의 기장은 소식(60$\times$60cm)한 경우 밀식(60$\times$20cm)한 경우와 같이 분벽들에 의한 밀식의 효과가 있었고 중간재식밀도(60$\times$40cm)인 경우에는 소ㆍ밀도의 중간되는 기장을 보였다. 4. MET계통은 개체당 이삭수가 많은 것에 반하여 이삭의 크기는 수원 19호의 \frac{1}{3}도 못되었다. 각분벽기에 달리는 이삭수는 소식의 경우 주기에 4개, 제일, 이분벽기에 2～3개씩 달렸다. MET계통의 입은 경입종이며 황색입이 주가되고 백색입이 약간 섞여 있었으며 100입중은 14~15gr. 의 소입종이었다. MET계통은 착수고가 수원 19호보다 훨씬 높았다. 5. 주요 특성간의 상간 : 수원 19호에 비하여 MET 계통은 주요 특성간에 높은 상관계수를 보여 유전상관도 높을 것이라는 것을 간접적으로 나타내주었다. 6. MET계통은 생장속도가 수원 19호보다 훨씬 늦었으며 개화기도 2~3주나 늦었다. 7. 흑조위축병 : 수원 19호와 같이 MET계통도 흑조위축병에 대해 이병성이었다. 이병성은 늦게 파종하거나 밀식할수록 높아지는 경향이 있었다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 농업과학연구
• /
• 제9권1호
• /
• pp.284-302
• /
• 1982

식량(食糧)으로서 단백질자원(蛋白質資源)의 개발문제(開發問題)는 동남(東南)아시아에 있어서 특(特)히 중요(重要)하며 한국(韓國)에 있어서도 섭취량(攝取量)이 부족(不足)한 현상(現狀)이다. 이 문제(問題)를 개선(改善)하는 방법으로 특(特)히 영양가(營養價)가 높은 동물성(動物性) 단백질(蛋白質)의 증산(增産)을 목적(目的)으로 한국재래산양(韓國在來山羊)의 사육(飼育)에 관(關)해서 연구(硏究)를 행하였다. 이 실험(實驗)은 우선 한국고유(韓國固有)의 재래산양(在來山羊)을 육자원(肉資源)으로 개발(開發)할 가치(價値)가 있는가를 확인(確認)하기 위해서 소형(小型) 제(第)1위법(胃法)으로 탄수화물(炭水化物)과 휘발성지방산(揮發性脂肪酸)의 흡수(吸收)를 실험(實驗)하였고 한편 in vivo법(法)에 의해서 제(第)1위(胃)의 아미노산 흡수(吸收)에 관해서 실험(實驗)을 했다. 이와 같은 실험(實驗) 결과(結果)에서 한국재래산양(韓國在來山羊)의 사육(飼育) 개선(改善)에 관해서 요약(要約)하면 다음과 같다. 1. 소형(小型) 제(第)1위법(胃法)에 의해서 재래산양(在來山羊)의 영양흡수(營養吸收)에 관하여 실험(實驗)한 결과(結果)는 영양소(營養素)를 주입(注入) 한 후 0.5, 1, 2시간(時間)의 간격(間隔)으로 측정(測定)한 V F A의 흡수율(吸收率)이 푸로피온산 70~86%, 초산 74~87%, 낙산 76~89%였다. 유기물(有機物)의 흡수율(吸收率)은 0.5%의 에칠 알콜이 29~89%였으며, 0.1M의 젖산이 12~27% 흡수(吸收)되었다. 2. 제(第)1위내(胃內)에 유리(遊離) L형(型) 아미노산을 투여(投與)하고 그 흡수(吸收)를 측정(測定)한 결과(結果)는 제(第)1위(胃) 정맥(靜脈)의 아미노산 함량(含量)에 있어서 전요(全要)아미노산구(區)에 비하여 메치오닌 결핍구(缺乏區)의 흡수율(吸收率)이 적었고 메치오닌 3배구(倍區)와 요소첨가구(尿素添加區)의 아미노산 흡수율(吸收率)이 높고 특(特)히 메치오닌을 결핍(缺乏)시켜도 점막층(粘膜層)의 함량(含量)에는 변화(變化)가 없었다. 3. 제(第)1위내(胃內)에 근육층(筋肉層)의 아미노산 흡수(吸收)도 점막(粘膜)과 같은 경향(傾向)을 보였으며 메치오닌 결핍(缺乏)에 의한 영향은 없고, 메치오닌을 3배(倍)로 첨가(添加)하면 전요(全要)아미노산구(區)에 비(比)하여 메치오닌과 글루타민의 함량이 147.44배(倍) 이상으로 증가(增加)되며 또 요소첨가구(尿素添加區)는 글루타민, 프롤린, 발린의 흡수율(吸收率)이 증가(增加)되었다. 4. 제(第)1위(胃) 정맥혈장(靜脈血漿) 중의 아미노산 농도(濃度)는 제(第)1위(胃) 점막(粘膜) 중이나 근육(筋肉) 중에서 보다 일반적(一般的)으로 낮으며 메치오닌의 결핍(缺乏)에 의해서 아미노산의 흡수율(吸收率)이 저하(低下)되고 메치오닌 3배구(倍區)나 요소첨가구(尿素添加區)는 아미노산 흡수(吸收)를 증가(增加)시키는 등 아미노산 조성분(組成分)에 따라서 그 흡수상태(吸收狀態)에 변화가 생긴다. 5. 요소첨가구(尿素添加區)는 제(第)1위(胃) 근육층(筋肉層)의 암모니아태질소(態窒素)와 아미노태질소(態窒素) 및 요소(尿素)의 함량(含量)을 증가(增加)시켰다. 재래산양(在來山羊) 제(第)1위(胃)안을 완전(完全)하게 깨끗이 할 수 없으므로 남아있는 세균(細菌)을 조사(調査)하였으며 암모니아태질소(態窒素)의 변화(變化)는 이러한 조건(條件)의 영향을 받았다. 6. 아미노산의 흡수차(吸收差)에 의한 제(第)1위(胃) 조직(組織)의 변화(變化)를 일반(一般) 현미경(顯微鏡)과 형광(螢光) 현미경(顯微鏡)으로 관찰(觀察)한 결과(結果)는 메치오닌 3배구(倍區)에 있어서 점막(粘膜)의 단층엔주상피(單層円柱上皮)와 고유층(固有層)이 약간 엷어졌으며 요소첨가구(尿素添加區)는 두껍게 변화(變化)하였는데 점막하조직(粘膜下組織)이나 근층(筋層)에 있어서는 각(各) 구간(區間)에 큰 차이(差異)가 인정(認定)되지 않았다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국토양비료학회지
• /
• 제3권1호
• /
• pp.35-41
• /
• 1970

10a 당(當) N 10, 15, 20kg, 인산(燐酸) 8, 12, 16kg 및 가리(加里) 8, 12, 16kg의 각각(各各) 3수준(水準)의 조합(組合)인 삼요소증비(三要素增肥) 요인실험(要因實驗)을 농광(農光)을 공시(供試)하여 숙답구(熟畓區), 저(低) 및 고염분구(高鹽分區)(4월말(月末) 각염분농도(各鹽分濃度) 0.5%와 1%)에서 적기재배(適期栽培)로 실시(實施)하여 아래와 같은 결과(結果)를 얻었다. 1. 인산(燐酸)과 가리시비(加里施肥)를 10a 당(當) 8kg으로 고정(固定)하고 N시비(施肥)를 1.5배(倍)와 2배(倍)로 증가(增加)시켰을 때 숙답구(熟畓區)와 염분구(鹽分區)들에서는 다 같이 시비량(施肥量)에 비례(比例)하여 N 흡수(吸收)가 증가(增加)되었다. 그리고 이때의 N 흡수(吸收)는 대체(大體)로 염분구(鹽分區)에서 더 많았다. N 증비처리(增肥處理)를 하거나 삼요소(三要素) 증비처리(增肥處理)를 하면 염분구(鹽分區)에서는 Ca와 Si의 흡수조해(吸收阻害)가 보였다. 2. 숙답구(熟畓區)에서는 N, P, K의 증비(增肥)는 증수(增收)를 가져오지 못하였고 가리(加里) 2배비(倍肥)는 유의(有意)하게 감수(減收)를 가져왔다. 3. 저염분구(低鹽分區)에서 N 증비(增肥)는 고도(高度)의 유의차(有意差)로 증수(增收)에 효과가 있었으며 N 1.5 배비(倍肥)는 12%, N 2배비(倍肥)는 21% 증수(增收)되었다. 인산(燐酸)과 가리(加里)의 증비(增肥)로는 증수(增收)되지 않았다. 4. 고염분구(高鹽分區)에서도 N 증비(增肥)는 유의(有意)하게 증수효과가 있었으며 인산(燐酸)과 가리(加里)의 증비(增肥)로 증수(增收)되는 것 같으나 유의성(有意性)은 없었다. 5. N 증비(增肥)는 숙답구(熟畓區)에서 1.5배(倍)까지는 수수(穗數)가 증가(增加)되었으나 2배비(倍肥)에서는 더 증가(增加)를 보이지 않았으며 저(低) 및 고염분구(高鹽分區)에서는 시비량(施肥量)에 비례(比例)하여 늘었다. 인산증비(燐酸增肥)는 각(各) 실험구(實驗區)에서 수수증가(穗數增加)의 경향(傾向)이 보였으나 가리증비(加里增肥)는 증가(增加)에 효과가 없었다. 6. 수중(穗重)에 대(對)한 N 증비(增肥)의 효과는 숙답구(熟畓區)에서는 감소(減少)로 나타났으며 양염분구(兩鹽分區)에서는 1.5배비(倍肥)까지는 증가(增加)되나 2배비(倍肥)는 1.5배비(倍肥)와 거의 같았다. 인산(燐酸), 가리(加里)의 증비(增肥)는 어느 실험구(實驗區)에서도 수중(穗重)에 영향(影響)을 미치지 못하였다. 천립중(千粒重)에 대(對)한 N, P, K의 증비효과는 숙답구(熟畓區)와 염분구(鹽分區)에서 모두 뚜렷하지 않았다. 수당립수(穗當粒數)에 대(對)한 N 증비효과는 숙답구(熟畓區)에서 감소(減少)의 경향(傾向)이었으나 양염분구(兩鹽分區)에 있어서는 증가(增加)되었다. 수당립수(穗當粒數)에 대(對)한 인산(燐酸), 가리(加里)의 증비효과는 없는것 같았다. 7. 임실율(稔實率)에 대(對)한 N 증비(增肥)의 효과는 숙답구(熟畓區)에서 감소(減少)되었으며 저(低) 및 고염분구(高鹽分區)에서는 N 증비효과가 없었고 인산(燐酸) 및 가리(加里)의 증비(增肥)는 어느 실험구(實驗區)에서도 효과가 없었다. 8. 정현비율(精玄比率)에 대(對)한 N, P, K의 증시효과는 각각(各各) 어느 실험구(實驗區)에서도 없었으나 설미(屑米)는 N 증비(增肥)에 의하여 숙답구(熟畓區) 및 염분구(鹽分區)들에서 다 같이 증가(增加)되었으며 숙답구(熟畓區)에서는 더 현저(顯著)하였다. 9. 고중(藁重)에 대한 N 증비(增肥)의 효과는 숙답구(熟畓區)와 고(高) 및 저염분구(低鹽分區)에서 다같이 증가(增加)되었으며 인산(燐酸), 가리(加里)의 증비(增肥)는 효과가 없었다. 정조중(精租重)/고중(藁重)에 대(對)한 N 증비(增肥)의 효과는 숙답구(熟畓區)에서는 감소(減少)되었으나 저(低) 및 고염분구(高鹽分區)에서는 증가(增加)되었고 인산(燐酸) 및 가리(加里)의 증비효과는 없었다.

• Applied Biological Chemistry
• /
• 제17권2호
• /
• pp.81-92
• /
• 1974

감자를 탁주(濁灌) 원료(原料)로 사용(使用)하기 위(爲)하여 증자(蒸煮), 건조(乾燥) 분쇄(粉碎)하고 이들의 화학성분(化學成分)을 분석(分析)하였으며 서분(薯粉)을 이용(利用)한 입국제조조건(粒麴製造條件), 담금조건(條件) 및 원료(原料)를 달리하였을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)함과아울러 술덧 숙성중(熱成中) 및 제성주(製成酒)의 보존중(保存中)에 있어서의 화학성분(化學成分) 및 microflora의 변화(變化) 기타(其他) 시험양조주(試驗釀造酒)의 관능검사(官能檢査) 등(等)을 행(行)하여 다음과 같은 결과를 얻었다 1. 증서(蒸著)와 서분(薯粉)의 화학성분(化學成分)은 각각(各各) 수분(水分) 76.2, 10.8%, 총당(總糖) 16.1, 69.8%, 환원당(還元糖) 3.45, 13.4% 조단백질(粗蛋白質) 2.1, 11.3% 총산(總酸) 0.012, 0.023%, 휘발산(揮發酸) 0.0012, 0.0025%이었다. 2. 서분(薯粉)을 이용(利用)한 이북제조(粒麴製造) 조건(條件)이 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)한 결과(結果) 원료분(原料紛)에 대하여 $40{\sim}50%$의 물을 혼화(混和)하여 상법(常法)에 의(依)해서 48시간(時間) 배양(培養)하는것이 효과적(效果的)이었으며 이와같은 조건하(條件下)에서 제조(製造)한 입국(粒麴)의 액화형(液化型) 및 당화형(糖化型) amylase의 역가(力價)는 각각(各各) D $40^{\circ}$30‘, 128 W.V., 13.2A.U.이었다. 3. Table I에서 표시(表示)한 기본(基本) 담금비율중(比率中) 여러가지 조건(條件)을 변화(變化)시켰을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)하여 다음과 같은 결과(結果)를 얻었다. (1) 1단(段) 담금 할 때에는 원료입국(原料粒麴) 60g에 대(對)하여 140ml의 물을, 2단(段) 담금 할 때에는 원료(原料) 140g에 대(對)하여 260ml의 물을 첨가(添加)하는 것이 가장 효과적(效果的)이었다. (2) 1단(段)을 $25^{\circ}C$, 2단(段)을 $30^{\circ}C$에서 발효(醱酵)시킬 때 1, 2단(段) 모두 48시간(時間)씩 발효(醱酵)시키는 것이 가장 효과적(效果的)이었다. (3) 분국(粉麴)은 1단(段)에 0.5%, 2단(段)에 1.0%를 첨가(添加)하는 것이 가장 효과적(效果的)이었고 입국(粒麴)은 20${\sim}$30% 사용시(使用時)에 술덧 성분상(成分上)에 큰 차이(差異)를 나타내지 않았다. (4) 증서분(蒸薯努)과 생서분(生薯粉)을 사용(使用)하여 탁주(濁酒)를 제조(製造)하였을때 술덧중(中)의 methanol 함량(含量)은 각각(各各) 0.03%, 및 0.06%이었다. (5) 서분(薯粉)을 원료(原料)로 양조(釀造)하였을 때는 소맥분(小麥粉)을 원료(原料)로 사용(使用)하였을 때에 비(比)하여 주도(酒度), fusel oil 및 Formol-N의 함량(含量)이 낮고 methanol의 함량(含量) 및 산도(酸度)는 높았다. 4. 서분(薯粉)을 원료(原料)로하여 1단(段)에서 24시간(時間), 2단(段)에서 96시간(時間)까지 발효(醱酵)시키면서 발효기간중(醱酵期間中)의 화학성분(化學成分) 및 microfora의 변화(變化)를 측정(測定)한 결과 (1) Alcohol 함량(含量)은 72시간(時間)까지 계속(繼續) 증가(增加)하여 11.9%에 달(達)하였으며 그 후(後)에는 약간(若干) 감소(減少)하였다. (2) 총당량(總糖量)은 $48{\sim}72$시간(時間)까지 급격(急激)히 감소(減少)하여 72시간(時間)에 2.62%에 달(達)하였으며 그 후(後)에는 서서(徐徐)히 감소(減少)되었다. (3) 환원당량(還元糖量)도 점차(漸次) 감소(減少)하였으며 48시간(時間)에 0.29%에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감(增減)을 나타내었다. (4) 총산도(總酸度), 휘발산도(揮發酸度) 및 Formol-N의 함량(含量)은 점차(漸次) 증가(增加)하여 48시간(時間) 후(後)에는각각(各各) 7.30, 0.20, 2.55에 달(達)하고 그 후(後)에도 약간(若干)씩 증가(增加)하는 경향(傾向)을 나타내었다. (5) 총효모수(總酵母數)는 72시간(時間)에 최고(最高)($2.1{\times}10^8$)에 달(達)하였으며 그 후(後)에는 점차(漸次) 감소(滅少)하였다. (6) 총세균수(總細菌數)는 48시간(時間)에 최고(最高)($2.4{\times}10^8$)에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감현상(增減現象)을 나타내였다. 5. 서분(薯粉)으로 양조(釀造)한 탁주(濁酒)를 alcohol 함량(含量) 6%가 되도록 제성(製咸)하여 $30^{\circ}C$에 72시간(時間) 보존(保存)하면서 주도(酒度), 산도(酸度), 총효모수(總酵母數) 및 총세균수(總細菌數)의 변화(變化)를 측정(測定)한 결과(結果) (1) alcohol 함량(含量)은 24시간(時間)에 약간(若干) 증가(增加)(6.2%) 하였다가 그 후(後)에는 점차(漸次) 감소(減少)하였다. (2) 총산도(總酸度)는 제성직후(製成直後) 3.8이었든것이 72시간(時間)에 6.1에 달(達)하도록 증가(增加)하였다. (3) 총효모수(總酵母數) 및 총세균수(總細菌數)는 48시간(時間)에 최고(最高)에 달(達)하여 각각(各各) $1.5{\times}10^8$ 및 $2.3{\times}10^8$이 되었으며 그 후(後)에는 점차감소(漸次減少)하였다. 6. 서분국(薯粉麴) 및 소맥분국(小麥粉麴)을 사용(使用)하여 1단(段) 담금하고 2단(段)에 이들의 5배량(倍量)의 증서(蒸薯)를 담금하여 발효(醱酵)시킨 결과(結果) alcohol함량(含量) 9.8${\sim}$11.3%, 총산도(總酸度) 5.8${\sim}$7.4 Formol-N 2.5${\sim}$3.3의 색택양호(色澤良好)한 술덧을 얻었다. 7. 서분(薯粉), 소맥분(小麥粉) 및 증서(蒸薯)를 여러가지 비율(比率)이 되도록 시험양조(試驗讓造)하여 alcohol함량(含量) 6%가 되도록 제성(製成)한 후(後) 관능시험(官能試驗)을 행(行)한 결과(結果) 소맥분(小麥粉)과 증서(蒸蓄)의 비율(比率)을 4 : 5 또는 3.5 : 7.5가 되도록하여 양조(釀造)한 탁주(濁酒)는 소맥분(小麥粉) 전용탁주(專用濁酒)와 관능면(官能面)에서 유의차(有意差)가 인정(認定)되지 않았으여 소맥분(小麥粉)과 서분(薯紛)의 비율(比率)을 1 : 1 또는 3 : 7의 비율(比率)이 되도록하여 양조(釀造)한 탁주(濁酒)는 상기(上記) 3종류(種類)의 탁주(濁酒)와 고도(高度)의 유의성(有意性)이 인정(認定)되었다.