• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.194-200
• /
• 1984

Effects of seed coating on establishment, early growth and herbage production were investigated in Pot, Soil box and Field experiments. Seed was coated with 60% Lime, 20% Phosphate and 20% Peatmoss(W/W), also finely sprayed 13% Arabic gum and 2% Methyl cellulose(W/V). Coating were generally 1:20, seed: coat(W/W). 1. In the general growth of the growing stages and different oversown species at 80 days, seed coated was promoted than none in early growth. (Table 2 and 3) 2. Stand counts at 60 days after oversown, seed coated was higher 15% than none, especially, there was advantage due to coating on the medium and large size seeds such as Orchardgrass, Perennial ryegrass and Kentucky bluegrass, but did not assist establishment of the large (Tall fescue) and small (Ladino clover) size seed. 3. Variation of sward composition was not quite different between two treatments, but seed coated was slightly increased the Percentage of sown grasses with advance of cutting time. 4. Total dry metter yield per unit area with seed coated was higher 17% than none in establishment year. 5. Variations in the chemical composition of the herbage and soil were influenced by coating materials in the coating regime (Table 8). 6. From these facts, seed coated also appeared that adequate seedling stands, early growth and herbage production could be obtained with higher than conventional overseeding method under a poor conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.285-294
• /
• 1999

Changes of chemico-physical properties and mturitiy during pig manure composting were analysed using three kinds of bulking agents with rice hull(T1), rice hull and extruding hull mixture (T2, 1:1, v/v), and extruding hull(T3). During composting process, temperature of T1, T2 and T3 were maintained over $50^{\circ}C$ for 31, 21, and 35 days respectively. Organic matter content of each treatment was decreased from 82.2%, 82.0%, and 82.8% to 70.5%, 68.9% and 69.7% and pH increased to 8.85, 9.91, and 8.80, respectively. Total nitrogen content of all treatments gradually decreased, but C/N ratio, phosphorous, and potassium content did not, show any changes during composting process. Both germination rate and early growth were tested using radish seeds for composting maturity. From those results, it was concluded that all treatments were stabilized after 45th day and extruding hull(T3) added compost was superior to others. The test of suppressive effect showed that all treatment have no effect against Fusarium oxysporum, Alternaria altemata, Botrytis cinerea. Compost supplemented with rice hull showed an inhibitory effect after 30th days, while compost supplemented with rice hull and extruding hull(T2) had an inhibitory effect during all period against Rhizoctonia solani. But treatment with extruding hull(T3) added compost did not have any inhibitory effect against Rhizoctonia solani. Only 63th samples in T1 and T2 treatment showed inhibitory effect against Colletoerichum gloeosporioides. However, T3 did not. Suppressive effect of extracts from 67 kinds of composts was investigated in vitro against plant pathogens, such as Fusauum oxysporum. Alternaria alternata, Colletotrichum gloeospoioides, Rhizoctonia solani, and Botrytis cinerea. Thirty two of them showed inhibitory effect against more than one phytopathogen, nine against one pathogen, four against two, six against three, six against four, and seven against five.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.125-153
• /
• 2005

It has been widely known that the seismic piezo-cone penetration test (SCPTU) is one of the most useful techniques for investigating the geotechnical characteristics including dynamic soil properties. As the practical applications in Korea, SCPTU was carried out at two sites in Busan and four sites in Incheon, which are mainly composed of alluvial or marine soil deposits. From the SCPTU waveform data obtained from the testing sites, the first arrival times of shear waves were and the corresponding time differences with depth were determined using the cross-over method, and the shear wave velocity profiles (VS) were derived based on the refracted ray path method based on Snell's law and similar to the trend of cone tip resistance (qt) profiles. In Incheon area, the testing depths of SCPTU were deeper than those of conventional down-hole seismic tests. Moreover, for the application of the conventional CPTU to earthquake engineering practices, the correlations between VS and CPTU data were deduced based on the SCPTU results. For the empirical evaluation of VS for all soils together with clays and sands which are classified unambiguously in this study by the soil behavior type classification Index (IC), the authors suggested the VS-CPTU data correlations expressed as a function of four parameters, qt, fs, $\sigma$, v0 and Bq, determined by multiple statistical regression modeling. Despite the incompatible strain levels of the down-hole seismic test during SCPTU and the conventional CPTU, it is shown that the VS-CPTU data correlations for all soils clays and sands suggested in this study is applicable to the preliminary estimation of VS for the Korean deposits and is more reliable than the previous correlations proposed by other researchers.

• Economic and Environmental Geology
• /
• v.30 no.5
• /
• pp.417-431
• /
• 1997

Characteristics of sedimentary rocks and enrichment of toxic elements in shale and coal from the Chungnam coal field were investigated based upon geochemistry of major, trace and rare earth elements. Shale and coal of the area are interbedded along the Traissic to the Jurassic Daedong Supergroup, which can be subdivided into grey shale, black shale and coal. The coal had been mined, however all the mines are abandonded due to the economic problems. The shale and coal are characterized by relatively low contents of $SiO_2$, and $Al_2O_3$ and high levels of loss-on-ignition (LOI), CaO and $Na_2O$ in comparison with the North American Shale Composite (NASC). Light rare earth elements (La, Ce, Yb and Lu) are highly enriched with the coal. Ratios of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in shale and coal range from 30.0 to 351.8 and from 4.2 to 106.8, which have partly negative correlations against $SiO_2/Al_2O_3$ (1.24 to 6.06), respectively. Those are suggested that controls of mineral compositions in shale and coal can be due to substitution and migration of those elements by diagenesis and metamorphism. Shale and coal of the area may be deposited in terrestrial basin deduced from high C/S (39 to 895) and variable composition of organic carbon (0.39 to 18.40 wt.%) and low contents of reduced sulfur (0.01 to 0.05 wt.%). These shale and coal were originated from the high grade metamorphic and/or igneous rocks, and the rare earth elements of those rocks are slightly influenced with diagenesis and metamorphism on the basis of $Al_2O_3$ versus La, La against Ce, Zr versus Yb, the ratios of La/Ce (0.38 to 0.85) and Th/U (3.6 to 14.6). Characteristics of trace and rare earth elements as Co/Th (0.07 to 0.86), La/Sc (0.31 to 11.05), Se/Th (0.28 to 1.06), V/Ni (1.14 to 3.97), Cr/V (1.4 to 28.3), Ni/Co (2.12 to 8.00) and Zr/Hf (22.6~45.1) in the shale and coal argue for inefficient mixing of the simple source lithologies during sedimentation. These rocks also show much variation in $La_N/Yb_N$ (1.36 to 21.68), Th/Yb (3.5 to 20.0) and La/Th (0.31 to 7.89), and their origin is explained by derivation from a mixture of mainly acidic igneous and metamorphic rocks. Average concentrations in the shale and coal are As=7.2 and 7.5, Ba=913 and 974, Cr=500 and 145, Cu=20 and 26, Ni=38 and 35, Pb=30 and 36, and Zn=77 and 92 ppm, respectively, which are similar to those in the NASC. Average enrichment indices for major elements in the shale (0.79) and coal (0.77) are lower than those in the NASC. In addition, average enrichment index for rare earth elements in coal (2.39) is enriched rather than the shale (1.55). On the basis of the NASC, concentrations of minor and/or environmental toxic elements in the shale and coal were depleted of all the elements examined, excepting Cr, Pb, Rb and Th. Average enrichment indices of trace and/or potentially toxic elements (As, Cr, Cu, Ni, Pb, U and Zn) are 1.23 to 1.24 for shale and 1.06 to 1.22 for coal, respectively.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.57-71
• /
• 2005

Purpose : To evaluate radiation dose and accuracy with TLD and diode detector when treat total skin with electron beam. Materials and Methods : Using Stanford Technique, we treated patient with Mycosis Fungoides. 6 MeV electron beam of LINAC was used and the SSD was 300 cm. Also, acrylic speller(0.8 cm) was used. The patient position was 6 types and the gantry angle was 64, 90 and $116^{\circ}$. The patient's skin dose and the output were detected 5 to 6 times with TLD and diode. Result : The deviations of dose detected with TLD from tumor dose were CA $+\;6\%$, thigh $+\;8\%$, umbilicus $+\;4\%$, calf $-\;8\%$, vertex $-\;74.4\%$, deep axillae $-\;10.2\%$, anus and testis $-\;87\%$, sole $-\;86\%$ and nails shielded with 4mm lead $+4\%$. The deviations of dose detected with diode were $-4.5\%{\sim}+5\%$ at the patient center and $-1.1\%{\sim}+1\%$ at the speller. Conclusion : The deviation of total skin dose was $+\;8\%{\sim}-\;8\%$ and that deviation was within the acceptable range(${\pm}\;10\%$). The boost dose was irradiated for the low dose areas(vertex, anus, sole). The electron beam output detected at the sootier was stable. It is thought that the deviation of dose at patient center detected with diode was induced by detection point and patient position.

• Journal of Life Science
• /
• v.29 no.12
• /
• pp.1305-1313
• /
• 2019

Licochalcone (LC), isolated from the roots of Glycyrrhiza inflata has multiple pharmacological effects including anti-inflammatory and anti-tumor activities. To date, Licochalcone C (LCC) has induced apoptosis and inhibited cell proliferation in oral and bladder cancer cells, but lung cancer has not yet been studied. In addition, no study reported LCC-induced autophagy in cancer until now. The present study was designed to investigate the effect of LCC on gefitinib-sensitive and -resistant lung cancer cells and elucidate the mechanism of its action. The 3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide assay data showed that LCC significantly inhibited cell viability in non-small cell lung cancer (NSCLC) HCC827 (gefitinib-sensitive) and HCC827GR (gefitinib-resistant) cell lines. Interestingly, Annexin V/7-aminoactinomycin D double staining and cell cycle analysis showed an apoptosis rate within about 20% at the highest concentration of LCC. LCC induced G2/M arrest by reducing the expression of the cell cycle G2/M related proteins cyclin B1 and cdc2 in NSCLC cell lines. Treatment of LCC also induced autophagy by increasing the expression of the autophagy marker protein microtubule-associated protein 1 light chain 3 (LC3) and the protein autophagy-related gene 5 involved in the autophagy process. In addition, LCC increased the production of reactive oxygen species (ROS), and the cell viability was partially restored by treatment with the ROS inhibitor N-acetyl-L-cysteine. In western blotting analysis, the expression of cdc2 was increased and LC3 was decreased by the simultaneous treatment of NAC and LCC. These results indicate that LCC may contribute to anti-tumor effects by inducing ROS-dependent G2/M arrest and autophagy in NSCLC. In conclusion, LCC treatment may be useful as a potential therapeutic agent against NSCLC.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.428-436
• /
• 2015

Five extraction conditions (AE, autoclave extraction; OE, oven extraction; HWSE, hot water and sonication extraction; HWASE, hot water acidified with 0.5% (v/v) acetic acid and sonication extraction; and BE, boiling extraction) were examined to compare the effects of different hot water extraction methods on the antioxidant properties of blueberries. The extraction yields of the AE, OE, HWSE, HWASE, and BE were 7.94%, 8.35%, 8.55% 9.15%, and 8.50%, respectively. The polyphenol and flavonoid contents of AE were 3.47 mg GAE/g and 1.59 mg RE/g, respectively, which were highest centents among others. Those of OE were ranked second to the highest. The total anthocyanin content of HWSE (5.29 mg/g) was significantly higher than that of others whereas that of AE showed the lowest content (0.96 mg/g). The order of ABTS radical and alkyl radical scavenging activities was as follows: AE > BE > OE > HWSE > HWASE. The antioxidant properties were considerably correspondent with the total polyphenol and flavonoid content. DPPH radical scavenging activity was quite high in HWSE, AE, and BE extraction, however, there were no significant differences among the five extraction methods in the aspect of $Fe^{2+}$ ion chelating activities. Moreover, AE showed the highest SOD activity, and protected the dermal fibroblast the best against $H_2O_2$-induced cytotoxicity. In conclusion, it was suggested that the autoclave extraction (AE) would be the most effective method for preparing blueberry hot water extracts with relatively high antioxidant activities.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.153-160
• /
• 2018

Purpose : We retrospectively analyzed doses of each radiation therapy technique used in the treatment for left breast cancer patients after partial mastectomy through dose results for normalorgans and tumor volume to use this as a clinical reference for radiation therapy of domestic left breast cancer patients. Materials and Methods : 40 patients who underwent partial mastectomy on left breast cancer were classified in 3 treatment methods. The treatment plan was evaluated by HI(homogeneity index), $D_{95%}$, and CI(conformity index), and the $V_{hot}$ for gross tumor volume and clinical target volume of each treatment method. In Cyberknife treatment, tumor volume was the same as high dose volume in the other techniques, so no consideration was given to clinical target volume. Treatment plan evaluation for normal organs were evaluated by mean dose on ipsilateral lung, heart, left anterior descending artery, opposite breast and lung, and non-target tissue. Result : Treatment with volumetric arc radiotherapy(VMAT) showed $95.84{\pm}0.75%$ of $D_{95%}$ on the clinical target volume, significantly higher than that of 3D-CRT. The $D_{95%}$ value of the total tumor volume was slightly higher than the other treatments. In Cyberknife treatment, the dose to the normal organs was significantly lower than other treatments. Overall, the maximum dose and mean dose to the heart were $26.2{\pm}6.12Gy$ and $1.88{\pm}0.2Gy$ in VMAT treatment and $20.25{\pm}9.35Gy$ and $1.04{\pm}0.19Gy$ in 3D-CRT therapy, respectively. Conclusion : In comparison on 3D-CRT and VMAT, most of the dosimetric parameters for the evaluation of the treatment plan showed similar values, so that there is no significant difference in treatment plan evaluation. It is possible to select the treatment method according to the patient's anatomical structure or possibility of breath control. Cyberknife treatment is very useful treatment for normal organs because of its accurate dose exposure to the tumor volume However, it has restrictions to treat the local area, to have relatively long treatment time and to involve invasive procedure.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.13-20
• /
• 2008

The flow rate measurements in a multi-phase flow pipeline were evaluated quantitatively by means of a clamp-on sealed radioisotope based on a cross correlation signal processing technique. The flow rates were calculated by a determination of the transit time between two sealed gamma sources by using a cross correlation function following FFT filtering, then corrected with vapor fraction in the pipeline which was measured by the ${\gamma}$-ray attenuation method. The pipeline model was manufactured by acrylic resin(ID. 8 cm, L=3.5 m, t=10 mm), and the multi-phase flow patterns were realized by an injection of compressed $N_2$ gas. Two sealed gamma sources of $^{137}Cs$ (E=0.662 MeV, ${\Gamma}$ $factor=0.326\;R{\cdot}h^{-1}{\cdot}m^2{\cdot}Ci^{-1}$) of 20 mCi and 17 mCi, and radiation detectors of $2"{\times}2"$ NaI(Tl) scintillation counter (Eberline, SP-3) were used for this study. Under the given conditions(the distance between two sources: 4D(D; inner diameter), N/S ratio: $0.12{\sim}0.15$, sampling time ${\Delta}t$: 4msec), the measured flow rates showed the maximum. relative error of 1.7 % when compared to the real ones through the vapor content corrections($6.1\;%{\sim}9.2\;%$). From a subsequent experiment, it was proven that the closer the distance between the two sealed sources is, the more precise the measured flow rates are. Provided additional studies related to the selection of radioisotopes their activity, and an optimization of the experimental geometry are carried out, it is anticipated that a radioisotope application for flow rate measurements can be used as an important tool for monitoring multi-phase facilities belonging to petrochemical and refinery industries and contributes economically in the light of maintenance and control of them.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.400-409
• /
• 2015

This study examined the plant growth and development characteristics of leafy vegetables on the hydroponic substrates of waste wood chips, radiate pine chips, and mat type of waste wood chips. The bulk density of waste wood chips and radiata pine chips were $0.2g/cm^3$ and $0.16g/cm^3$, respectively. The moisture retention properties of both the radiata pine chips and waste wood chips were found to be similar but not better than those of the control rock wool and coco peat hydroponic substrates. The moisture retention property of the mat type was found to be the lowest. The chemical analysis of waste wood hydroponic substrates (w/v) was as follows.; The pH was 6.59, electric conductivity was 6.76 dS/m, total nitrogen content was 0.5%, C/N ratio was 113%, phosphorus was 10.1 ppm, potassium was 77 ppm, calcium was 531 ppm, magnesium was 49 ppm, and sodium was 96 ppm. The results from the radiata pine chemical analysis showed that it had a pH of 5.29, electric conductivity of 4.49 dS/m, total nitrogen content of 0.32%, C/N ratio of 180%, phosphorus of 6.4 ppm, potassium of 83 ppm, calcium of 97 ppm, magnesium of 29 ppm, and sodium of 59 ppm. Except for the plants grown in mat type, the developmental characteristics of the plants grown in rock wool and coco peat hydroponic substrates were similar. Based on the results of the experiment, waste wood resources may possibly be used as an organic solid medium in place of the existing rock wool and coco peat medium.