• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.267-272
• /
• 2002

Pitting corrosion is a very common occurrence in marine structures. Therefore, the 3-D finite element analysis is carried out to determine the stress intensity factors at the pit depth and also at the surface of the pit. The pits are modeled as a part of sphere, based on the pit depth and the pit diameter as specified by the Ship Structural Committee. The pit depth and pit diameter are function of the percentage of pitting that the plate is subjected to. A dog-bone shaped specimen is subjected to different intensities of pitting and the stress intensity factors are determined under axial tensile loads.

• 헤리티지:역사와 과학
• /
• 제33권
• /
• pp.36-67
• /
• 2000

Square-shaped moated burial precincts(方形周溝墓) can be classified into type I that has bridges only at the comers, type II that has bridges at the comers and sides, type III that has bridges only at the sides, type IV that is surrounded by the moat without bridges, type V that has its sides less than those of type I ~ V by 1 or 2, and type VI that has the round-shaped ground. But the time differences among the types are not known yet. For the burial appliances of square-shaped moated burial precincts, there are stone coffins, pit burials and jar burials. The major burial appliances situated in the mound are stone coffins and pit burials, and jar burials are subsidiary appliances that were buried at the shoulder part of the mound or at precincts. According to the case of Gwanchang-ri KM423, grave mounds, which arc closely related with the burial appliances, were built by heaping up the earth in and around the precinct as low as only enough to protect the burial appliances. Considering the relics unearthed in the burial compartment of KM437, the time when square-shaped moated burial precincts were formed is estimated to be the age when Songguk-ri type earthenware and clay stripes earthenware co-existed. It was the early Iron Age when ironware began to sp read in this country. Emerging first in that age, square-shaped moated burial precincts were presumably formed until around the end of BC or the beginning of AD, when KM404 and KM423, which were unearthed with plain earthenware, grey earthenware and ironware, were formed. When analyzing the form of small-sized graveyards in precincts, the unearthed relics and the locations, the people who formed square-shaped moated burial precincts were considered as those who had a culture comprising clay stripes earthenware, which appears newly in the Songguk-ri type earthenware of native, and ironware, and a settled agricultural society based on paddy fields and labor forces of family units.

• 한국패류학회지
• /
• 제27권2호
• /
• pp.91-97
• /
• 2011

This study examines the morphological features of larval and postlarval shells of the paedomorphic bivalve Crenella decussata Montagu, 1808 from the Sea of Japan. During the early morphogenesis of the shell of C. decussata the following characteristics appear: prodissoconch I -the anterior and posterior provincular teeth, a broad primary ligament pit located on the chondrophore; nepioconch - the anterior and posterior juvenile teeth,primary lateral teeth, fine commarginal and radial sculpture. Larvae of C. decussata distinctly differ from other mytilid larvae by a D-shaped shell, absence of umbo, astraight hinge margin, and homogeneous fine-grained sculpture without co-marginal lines of growth. These shell characters indicate lecithotrophic development of this species. Some morphostructures are revealed which might be used in crenellin taxonomy.

• Parasites, Hosts and Diseases
• /
• 제52권5호
• /
• pp.569-573
• /
• 2014

In a paleo-parasitological analysis of soil samples obtained from V-shaped pits dating to the ancient Baekje period in Korean history, we discovered Ascaris lumbricoides, Trichuris trichiura, and Clonorchis sinensis eggs. In light of the samples' seriously contaminated state, the V-shaped pits might have served as toilets, cesspits, or dung heaps. For a long period of time, researchers scouring archaeological sites in Korea have had difficulties locating such structures. In this context then, the present report is unique because similar kind of the ancient ruins must become an ideal resource for successful sampling in our forthcoming paleoparasitological studies.

• 한국결정성장학회지
• /
• 제26권1호
• /
• pp.1-7
• /
• 2016

RE : YAG 단결정은 레이저 발진 소재로 다양한 성장 변수를 제어하면서 Czochralski법으로 성장된다. 성장과정 동안 고액계면의 온도구배 및 회전속도에 의해 발생하는 결함들은 결정의 광학적 특성 저하로 작용하기 때문에 결함 분석을 통한 결정 품질의 향상을 필요로 한다. 격자결함 밀도 분석(EPD)을 통하여 성장된 RE : YAG 단결정의 표면 결함 존재를 확인하였고, 이를 통해 투과전자현미경(TEM) 분석영역을 선택하였다. 선택한 영역의 시편은 트라이포드 연마 방법으로 제작하였고, 200 kV 투과전자현미경과 300 kV 전계 방사형 투과전자현미경(FE-TEM)을 사용하여 buckling, rod shaped, 내부응력에 의한 bend contours, 편석 등의 결함들을 관찰하였다.

• 환경생물
• /
• 제41권4호
• /
• pp.666-676
• /
• 2023

Laurencia is a red algal genus that was described by J.V. Lamouroux in 1813. The main characteristics of this genus have been known as the presence of four pericentral cells in an axial segment, secondary pit connections between adjacent epidermal cells, and the presence of corps en cerise in both epidermal and trichoblast cells. Additionally, the tetrasporangia are arranged in a parallel manner, and male branches feature terminal cup-shaped spermatangial pits. Currently, sixteen Korean Laurencia species have been reported based on their morphological characteristics. In this study, Laurencia decussata and L. pacifica have been added as new records to the Korean algal flora based on a combination of morphological observations and molecular analyses of rbcL sequences. Laurencia decussata has expanded from Australia and New Zealand to Korea, while the distribution of L. pacifica has expanded from USA and Mexico to Korea.

• 한국의학물리학회지:의학물리
• /
• 제10권3호
• /
• pp.133-140
• /
• 1999

본 연구에서는 외부조사 전자선에 대한 3 차원 선량계산 알고리즘 모델을 개발하기 위한 기초연구로서 기존의 2D 펜실빔 알고리즘을 확장시켜 3 차원 geometry를 적절히 고려할 수 있는 선량계산 모델을 개발하고자 한다. 선량계산 모듈은 IDL5.2(Reseach Systems Inc. 미국)를 사용하여 프로그램하였으며, Hogstrom의 펜실빔 모델에 의한 선량계산에 필요한 중심축 상의 깊이선량분포는 Siemens M6740의 12MeV 전자선에 대한 측정치를 사용하였고, 전자선의 공기 및 불에서의 선형저지능 (linear stopping power), 선형산란능 (linear scattering power) 은 ICRU 보고서 35로부터 인용하여 사용하였다. 선량계산의 정확도를 확인하기 위하여 정형 조사면에 대한 선량분포 공기 간격 효과 인체 외곽 보정에 대해 전리함, 필름 등을 사용하여 얻은 측정값과 비교, 분석하였다. PC(Pentium III 450MHz) 상에서 프로그램 실행 결과 단일 조사 빔에 대한 선량계산에 약 120초가 소요되어, 선량계산 알고리즘의 최적화를 통한 선량계산 시간 단축이 필요하다 하겠다. 선량 평가에 대한 비교 결과, 정형 및 비정형 조사변에 대한 선량분포는 선량변화가 급격한 반음영 (penumbra) 영역에서 $\pm$3mm 이내의 오차를 보였으며, 측방 선량분포에 따른 비교 결과, 측정치와 5% 이내에서 일치하였다. 또한 공기 간격 및 인체 외곽선 보정의 경우, $\pm$10% 내외에서 측정값과 일치하였다. 결론적으로, 전자선에 대한 2 차원 펜실빔 모델을 확장하여 3 차원 치료계획에 적합하게 3 차원상의 임의의 단변 선량계산이 가능하도록 구현되었다. 또한 비정형 조사변에 대한 선량계산 뿐만 아니라, 인체외곽 및 공기 간격 등과 같이 3 차원적 geometry에 대한 보정이 필요한 경우에 대하여도 이를 선량계산 시 적절히 고려함을 확인할 수 있었다. 추후, CT를 통한 비균질 보정방식을 구현할 계획이며, 이들 선량계산 모듈은 교육 및 연구용으로 적절히 활용할 수 있을 것으로 기대된다.