• The Korean Journal of Physiology
• /
• v.16 no.2
• /
• pp.119-128
• /
• 1982

The frog truncus arterious were studied with conventional glass microelectrode technique in order to elucidate the underlying mechanism of spontaneous pacemaker activity. The analyses were focussed on the ionic nature of pacemaker current by changing the concentrations of extracellular $K^+$ and, $Na^+$, or by using blockers of K- and Ca-current and chronotropic transmitters. 1) The action potential of the spontaneously active truncus arteriosus has some characteristic feature of maximal distolic potential ranged from -65 to -75 mV, resting potential from -45 to -50 mV and overshoot voltage about +30 mV, respectively. Duration of the action potential taken from rapid upstroke to maximal diastolic potential was about 600 msec. Usual discharge rate was $25{\sim}30/min$ at room temperature $(18{\sim}20^{\circ}C)$. 2) The sensitivity of the resting membrane potential to change extracellular potassium concentrations $(0{\sim}12\;mM)$ was relatively low. Transient hyperpolarization was appeared in the 12 mM K Ringer after 10 min exposure to 0 mM K and it could be related to Na-pump reactivation by high potassium. 3) Reduction of extracellular sodium concetrations diminished the amplitude and frequency of the action potential. In Ringer solution containing 30% Na (substituted by equimolar Tris), spontaneous activity stopped but reappeared as very slow and small action potential. There was no spotaneous activity in zero Na Ringer solution. 4) Caesium(10 mM), K-current blocker decreased the frequency of the action potential and also pacemaker depolarization. Manganese (2 mM) known to be Ca-current antagonist, blocked spontaneous activity completely. 5) Adrenaline and acetylcholine had no chronotropic effect. But adrenaline increased the duration of plateau phase and the magnitude of the action potential in the follower cell. It is concluded that K-, Na-and Ca-current components are involved in the genesis of spontaneous activity of the frog truncus arteriosus like cardiac pacemaker tissues. But the insensitivity of truncus arteriosus to adrenaline and acetylcholine indicates that there are some different control mechanisms of spontaneous rhythm in two tissues.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.6
• /
• pp.783-792
• /
• 2004

In this study, a thick-film semiconductor odor gas sensor for the detection of $CH_3$SH was developed using SnO$_2$ as the main substrate and was investigated in terms of its sensitivity and reaction time. In the process of manufacturing the sensor, Taguchi's design of experiment (DOE) was applied to analyze the effects of a variety of parameters, including the substrate, the additives and the fabrication conditions, systematically and effectively. Eight trials of experiments could be possible using the 27 orthogonal array for the seven factors and two levels of condition, which originally demands 128 trials of experiments without DOE. The additives of Sb$_2$O$_{5}$ and PdCl$_2$ with the H$_2$PtCl$_{6}$ ㆍ6$H_2O$ catalyst were appeared to be important factors to improve the sensitivity, and CuO, TiO$_2$, V$_2$O$_{5}$ and PdO were less important. In addition, TiO$_2$, V$_2$O$_{5}$ and PdO would improve the reaction time of a sensor, and CuO, Sb$_2$O$_{5}$, PdCl$_2$ and H$_2$PtCl$_{6}$ㆍ6$H_2O$ were negligible. Being evaluated simultaneously in terms of both sensitivity and reaction time, the sensor showed the higher performance with the addition of TiO$_2$ and PdO, but the opposite results with the addition of CuO, V$_2$O$_{5}$, Sb$_2$O$_{5}$ and PdCl$_2$. The amount of additives were superior in the case of 1% than 4%. H$_2$PtCl$_{6}$ㆍ6$H_2O$ would play an important role for the increase of sensor performance as a catalyst.nce as a catalyst.

• Journal of Power Electronics
• /
• v.5 no.2
• /
• pp.120-128
• /
• 2005

This paper deals with the analysis of switched reluctance motor drives for different drive circuit topologies used in automobile. So we attempt to improve the weaknesses associated with the asymmetric bridge converter in the limited internal environment of automotive application. Two kinds of c-dump converters are tested in terms of dump capacitor voltage, speed response according to the variation of advance angle and efficiency for the radiator cooling-fan drive of an automobile. They enable more economical and efficient converter topology for automobile industries. This paper describes the performance characteristics of 12V-250W-3000rpm SRM drives for automotive application. Computer simulation and experiment results are then presented to verify the performance of the two kinds of c-dump converters.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.3
• /
• pp.123-128
• /
• 2007

Hydro power supplies no pollution energy, mainly induction generator has been applied at the small capacity power station. The generating power of small hydro-electric power station connects on the 22.9kV distribution system or low voltage system in the case of three-phase four-wire supply system. There are side effects of various kinds in the 3-three phase 4-wire distribution system mixing 1-phase load and 3-phase load. This system generates the voltage unbalance by unbalanced load operating condition. They have various serious effects on generator and connection system. In this paper, we analyzed what kind of operation characteristic are happened in the induction generator by customer load variation at the 3-three phase 4-wire distribution system.

• Microbiology and Biotechnology Letters
• /
• v.25 no.2
• /
• pp.121-128
• /
• 1997

A lactic acid bacterium was isolated from kimchi. The isolated strain was identified as the genus Lactobacillus through its morphological, cultural, and physiological characteristics and named as Lactobacillus sp. JC-7. The optimum conditions for the electrofusion between streptomycin (2.5 mg/ml) resistant mutant of Lactobacillus acidophilus 88 and kanamycin (600 $\mu$g/ml) resistant mutant of Lactobacillus sp. JC-7 were evaluated. The highest number of fusants were obtained at a capacitance value of 120 msec (1670 $\mu$F), a field strength of 100 V/cm, and a pulse controller setting of 72$\Omega$. The optimum pH of electroporation buffer was 7.5 and the concentration of divalent cation was 1 mM Mg$^{2+}. Electrofusants were efficiently obtained by addition 20% polyethylene glycol to elec- troporation buffer. The yield of fusion was better than that of using polyethylene glycol mediated chemical induction.

• Elastomers and Composites
• /
• v.21 no.2
• /
• pp.121-128
• /
• 1986

Studies has been carried out on the characteristics of thermally stimulated current for polypropylene in the temperature range of $293[^{\circ}K]{\sim}403[^{\circ}K]$. The main peak observed at $366[^{\circ}K]$, as may be $\beta$ peak in conventional nomination, is believed to be depolarization current originated from the relaxation of "CO" group in monomer structure. The activation energy for the observed peak has been concluded to be in the range of $0.6{\sim}0.7[(eV]$ at $360[^{\circ}K]$ by the initial rise method. Furthermore, the initial density of carriers were calculated about $10^{22}/m^3$

• Macromolecular Research
• /
• v.13 no.2
• /
• pp.128-134
• /
• 2005

The phosphorus comonomer [(6-oxido-6H-dibenz<1,2>oxaphosphorin-6-yl)methyl]-methyl butane-dioate (DOP-MBDA) was synthesized through the addition reaction of dimethyl itaconate (DMI) with 9,10-dihydro­9-oxa-10-phosphaphenan threne-10-oxide (DOP). A series of novel flame retardant poly(butylene terephthalate)s (PBTs) containing different amounts of phosphorus were prepared using DOP-MBDA as a comonomer. These novel polymers were characterized by $^{1}H-NMR$, IR, and differential scanning calorimetry (DSC). The novel phosphorus­containing poly(butylene terephthalate)s, referred to as FR-PBTs, exhibited interesting thermal and mechanical behavior, as well as superior flame retardancy. These properties are attributed to the effect of incorporating the rigid structure of DOP-MBDA and the pendant phosphorus group into the poly(butylene terephthalate) (PBT) homopolymer. The UL 94-V2 rating could be achieved with this novel flame retardant PBT, which has a phosphorus content as low as $0.5 wt\%$, and the FR-PBTs emitted less fumes and toxic gases than the PBT homopolymer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.652-655
• /
• 2003

In this paper, step-down piezoelectric transformer is studied. The piezoelectric transformer, made of lead zirconate titanate solid solution ceramic, is operated by a fundamental contour-extensional vibration mode. The transformer of 14mm length, 14mm width and 4.5mm thickness was made up two shape(Type I and II). The resonant frequency (fr) is 144kHz and 128kHz at the load resistant of $7.5{\Omega}$ that is a similar to calculating matching impedance. The gain (G) obtained 0.19 and 0.08 at each resonant frequency, when applied input voltage is 25V. The temperature difference with the variation of load resistant was increased with increasing load resistant and was the lowest at $7.5{\Omega}$ near the matching of output impedance.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1217-1222
• /
• 1996

Undoped barium titanate ceramic samples with high density were produced by using both high purity hydro-thermally synthesized and oxalate-derived powders. Sintering temperature was varied in the temperature range 128$0^{\circ}C$-140$0^{\circ}C$ to control the average grain sizes of the samples. Electrical breakdown test was performed at two different temperature with 3$0^{\circ}C$(below Tc) and 15$0^{\circ}C$ (above Tc) for samples immersed in silicon oil bath using 60kV dc power supply. From the experimental results at below and above Curie temperature the grain size and thickness dependence of electrical breakdown strength for BaTiO3 ceramics was presented and breakdown behavior was also studied.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.609-610
• /
• 2008

In this paper, a 110 dB, 1.024 MHz fourth-order single-loop Delta-Sigma sigma modulator has been presented with an over-sampling ratio of 128 and an overload factor of -6 dB for a bandwidth of 4 kHz. In particular, this ${\Sigma}-{\Delta}$ modulator is well suited for high accuracy measure systems. The whole modulator consumes only 3-mW from a single 3.3V supply in a $0.35-{\mu}m$ CMOS technology.