• 제목/요약/키워드: V shape

검색결과 1,239건 처리시간 0.027초

Coincidence summing correction for a voluminous 152Eu source

  • Yoon, Eun Taek;Kang, Min Young;Kim, In Jung;Sun, Gwang Min;Choi, Hee-Dong
    • Nuclear Engineering and Technology
    • /
    • 제52권6호
    • /
    • pp.1266-1270
    • /
    • 2020
  • A code is developed to correct for the coincidence summing effect in detecting a voluminous gamma source, and this code is applied to a152Eu standard source as a test case. The source is 1000 mL of liquid in a cylindrical shape. To calculate the coincidence summing effect, the cylindrical source is considered as 10(radial) × 8(height) sectional sources. For each sectional source, the peak efficiency and total efficiency are obtained by Monte Carlo simulation at each energy for 10 energies between 50 keV and 2000 keV. The efficiencies of each sector are then expressed as polynomials of gamma energy. To calculate the correction coefficients for the coincidence summing effect, the KORSUM code is used after modification. The magnitudes of correction are 4%-17% for the standard 152Eu source measured in this study. The relative deviation of 4.7% before the coincidence correction is reduced to 0.8% after the correction is applied to the efficiency based on the measured gamma line. Hence, this study has shown that a new method has been developed that is applicable for correcting the coincidence effect in a voluminous source, and the method is applied to the measured data of a standard 152Eu cylinder source.

Thermal Modeling of Comet-Like Asteroids from AKARI Observation

  • Park, Yoonsoo Bach;Ishiguro, Masateru;Usui, Fumihiko
    • 천문학회보
    • /
    • 제41권2호
    • /
    • pp.50.3-51
    • /
    • 2016
  • Recent analysis on the thermophysical property of asteroids revealed that their thermal inertia decrease with their sizes at least for main belt asteroids. However, little is known about that of comet-like bodies. In this work we utilized a simple thermophysical model (TPM) to calculate the thermal inertia of a bare nucleus of the comet P/2006 HR30 (Siding Spring) and an asteroid in comet-like orbit 107P/(4015) Wilson-Harrington from AKARI observation data. From five spectroscopic observations of the targets, we find out that the former has thermal inertia of around $2,000J\;m^{-2}K^{-1}s^{-1/2}$ (using pV = 0.055) and the latter has about $1,000-2000J\;m^{-2}K^{-1}s^{-1/2}$ (using pV = 0.055 and 0.043, respectively). These are high enough for both of them to deposit water ice at few centimeters depth, and hence it is difficult to say they are cometary based on the results of this study. These values, however, dependent significantly on the errors of observation and the uncertainties of the input parameters, as well as other conditions which are ignored in simple TPM approach, such as shape model and surface roughness. Further detailed analyses on these cometary bodies will shed light on our understanding of the detailed surfacial characteristics of them.

  • PDF

${\cdot}$부극 재료의 특성에 따른 리튬이온전지의 용량설계 (Capacity Design of Lithium Ion Battery Based on the Characteristics of Materials)

  • 문성인;도칠훈;윤성규;염덕형
    • 한국전기화학회:학술대회논문집
    • /
    • 한국전기화학회 1998년도 전지기술 심포지움
    • /
    • pp.7-27
    • /
    • 1998
  • In order to design capacity of lithium ion battery, some calculations were carried out based on the characteristics of materials by the given battery shape and dimension. The principle of design was built by the interpretation of the correlation of material, electrochemical and battery factors. Parameters of materials are fundamental physical properties of constituent such as cathode. separator, anode, current collectors and electrolyte. Electrochemical factor includes potential pattern as a function of specific capacity, specific discharge capacity(or initial irreversible specific capacity or Ah efficiency) as a function of specific charge capacity and material balancing. Parameters of battery are dimension, construction hardware and performance. Battery capacity was simulated for a lithium cobalt dioxide as cathode and a hard carbon as anode to achieve 1100 mAh for the charge limit voltage of 4.2V, the weight ratio(+/-) of 2.4 and ICR18650. A fabricated test cell (ICR18650) which have weight ratio(+/-) of 2.4 discharged to 1093 mAh for the charge limit voltage of 4.2V. The sequential discharge capacity show good correspondence with designed capacity.

  • PDF

인쇄회로 기판에 내장된 마이크로 플럭스게이트 센서 (A MICRO FLUXGATE SENSOR IN PRINTED CIRCUIT BOARD (PCB))

  • 최원열;황준식;나경원;강명삼;최상언
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집
    • /
    • pp.151-155
    • /
    • 2002
  • This paper presents a micro fluxgate magnetic sensor in printed circuit board (PCB). The fluxgate sensor consists of five PCB stack layers including one layer magnetic core and four layers of excitation and pick-up coils. The center layer as a magnetic core is made of a micro patterned amorphous magnetic ribbon with extremely high DC permeability of ∼100,000 and the core has a rectangular-ring shape. The amorphous magnetic core is easily saturated due to the low coercive field and closed magnetic path for the excitation field. Four outer layers as an excitation and pick-up coils have a planar solenoid structure. The chip size of the fabricated sensing element is 7.3${\times}$5.7m㎡. Excellent linear response over the range of -100${\mu}$T to +100${\mu}$T is obtained with 540V/T sensitivity at excitation square wave of 3V$\_$P-P/ and 360kHz. The very low power consumption of ∼8mW was measured. This magnetic sensing element which measures the lower fields than 50${\mu}$T, is very useful for various applications such as: portable navigation systems, military research, medical research, and space research.

  • PDF

PCB 기판에 내장된 마이크로 플럭스게이트 센서 (Embedded Micro Fluxgate Sensor in Printed Circuit Board (PCB))

  • 최원열;황준식;강명삼;최상언
    • 한국전기전자재료학회논문지
    • /
    • 제15권8호
    • /
    • pp.702-707
    • /
    • 2002
  • This paper presents a micro fluxgate sensor in printed circuit board (PCB). The fluxgate sensor consists of five PCB stack layers including one layer magnetic core and four layers of excitation and pick-up coils. The center layer as a magnetic core is made of a micro patterned amorphous magnetic ribbon and the core has a rectangular-ring shape. The amorphous magnetic core is easily saturated due to the low coercive field and closed magnetic path for the excitation field. Four outer layers as an excitation and pick-up coils have a planar solenoid structure. The chip size of the fabricated sensing element is 7.3$\times$5.7$\textrm{mm}^2$. Excellent linear response over the range of -100$\mu$T to +100$\mu$T is obtained with 540V/T sensitivity at excitation square wave of 3 $V_{p-p}$ and 360kHz. The very low power consumption of ~8mW was measured. This magnetic sensing element, which measures the lower fields than 50$\mu$T, is very useful for various applications such as: portable navigation systems, military research, medical research, and space research.h.

Pt/LiNbO3/AlN/Si(100) 구조를 이용한 MFIS 커패시터의 전기적 특성 (Electric Properties of MFIS Capacitors using Pt/LiNbO3/AlN/Si(100) Structure)

  • 정순원;김광호
    • 한국전기전자재료학회논문지
    • /
    • 제17권12호
    • /
    • pp.1283-1288
    • /
    • 2004
  • Metal-ferroelectric-insulator-semiconductor(WFIS) capacitors using rapid thermal annealed LiNbO$_3$/AlN/Si(100) structure were fabricated and demonstrated nonvolatile memory operations. The capacitors on highly doped Si wafer showed hysteresis behavior like a butterfly shape due to the ferroelectric nature of the LiNbO$_3$ films. The typical dielectric constant value of LiNbO$_3$ film in the MFIS device was about 27, The gate leakage current density of the MFIS capacitor was 10$^{-9}$ A/cm$^2$ order at the electric field of 500 kV/cm. The typical measured remnant polarization(2P$_{r}$) and coercive filed(Ec) values were about 1.2 $\mu$C/cm$^2$ and 120 kV/cm, respectively The ferroelectric capacitors showed no polarization degradation up to 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulses of 1 MHz. The switching charges degraded only by 10 % of their initial values after 4 days at room temperature.e.

ATILA 시뮬레이션을 이용한 스퀘어타입 압전변압기의 펙터연구 (Investigation of facto~ in square-type piezoelectric transformer using ATILA simulation)

  • 보비엣탕;김인성;주현규;정순종;김민수;송재성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.327-327
    • /
    • 2010
  • In this paper, an investigation of factors affecting piezoelectric transformers is presented by ATILA software. These transformers are multi-layer piezoelectric transformers in square shape $28\;{\times}\;28\;mm$ and operate in first vibration mode for step-down function. The piezoelectric transformers were modeled in 3D-dimension and analyzed using finite element method in ATILA software, a popular software in piezoelectric analysis. Modal and harmonic modules were used in this process. Effective factors to the properties of piezoelectric transformers including different input electrode patterns, directions of polarization, sizes of connective comer, number of layers were examined on the simulated model using input voltage of 20 V and load resistance of $100\;{\Omega}$. Moreover, thermal analysis was also obtained with conditions of input voltage of 5 V and no-load.

  • PDF

박용디젤기관의 대기오염 저감을 위한 전기 다단 임팩션 시스템의 집진특성 (Collection characteristics of electro-static multi-staged impaction system for air pollutants removal of marine diesel engines)

  • 여석준;권준형
    • 수산해양기술연구
    • /
    • 제51권4호
    • /
    • pp.545-552
    • /
    • 2015
  • The main object of this study is to investigate the collection characteristics of an electro-static multi-staged impaction system, experimentally. The experiment is carried out to analyze the characteristics of pressure drop and collection efficiency for the present system with the experimental parameters such as the inlet velocity, stage number, applied voltage and shape of discharge electrode, etc. In results, the pressure drop is shown below $148mmH_2O$ lower than that of the conventional bag filter at inlet velocity 3.46 m/s and 5 stage. For 5 stage, the collection efficiencies are to be 97.4, 99.0% with the applied voltage 0 kV at the inlet velocity 2.07, 3.46 m/s, while 98.4, 99.9% with 40 kV of a sharp edge discharge electrode. Additionally, the present system is to be considered as an effective compact system for a removal of particulate pollutants from marine diesel engines due to much higher collection efficiency and appropriate pressure drop.

졸겔법에 의한 DSSC 광전극의 전기화학적 특성 (Electrochemical Characteristics of TiO2 Photoelectrode for DSSC Prepared by Sol-gel Method)

  • 박아름;;구할본
    • 한국전기전자재료학회논문지
    • /
    • 제25권4호
    • /
    • pp.315-320
    • /
    • 2012
  • In general, a photoelectrode in DSSC(dye sensitized solar cell) are fabricated by using the $TiO_2$ (Titanium dioxide) to realize high efficiency and the efficiency of DSSC is affected by the size, the shape and the property of $TiO_2$. We synthesized the crystalline $TiO_2$ by sol-gel method. In spite of many merits, only weakness for the sol-gel method is taking many process times. To solve this problem, we reduced the fabricating processes. The reduced process is the making process that is $TiO_2$ sol to $TiO_2$ powder with including of two heat treatment and two mixing. We could simplify the process by preparing $TiO_2$ sol to $TiO_2$ paste directly. As a result, DSSC fabrication process is simplified and we have obtained the efficiency best result 3.88% with $V_{OC}$=0.71 V, $J_{SC}=8.70\;mA/cm^{-2}$, and FF=62.37%, respectively.

변전소 인입 강관주 선간거리 개선사례 분석 (Study on the reform case of safe distance between overhead transmission conductor of front steel pole in substation)

  • 이재욱;황광수;전재감;최종수
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 춘계학술대회 논문집
    • /
    • pp.369-373
    • /
    • 2008
  • 이번 사례는 154kV 변전소 OO송전선로(T/L)인 출입철탑(철주 포함) 설계 시 설치장소의 협소한 문제점을 해결하기 위한 대책을 수립하고 이에 대하여 시공과정에서 발생한 문제점 과 이를 개선한 사례를 분석하였다. 표준형 철탑으로 설계 시 인 출입에 따른 전로의 전기적인 이격거리를 확보하기가 어려우며, 이를 개선하기 위해 특수형상의 철탑 및 기초형식의 인입방안 설계에 대한 개선대책과 현장 개선 사례 분석을 통하여 향후 인입 전선로 설계검토에 참고자료가 될 것으로 사료된다.

  • PDF