• 설비공학논문집
• /
• 제25권5호
• /
• pp.269-278
• /
• 2013

In this study, in order to examine the applicability of computational fluid dynamics with the porous model to the analysis of APR+ (Advanced Power Reactor Plus) internal flow, simulation was conducted with the commercial multi-purpose computational fluid dynamics software, ANSYS CFX V.14. In addition, among the various reactor internals, the effect of flow skirt geometry on reactor internal flow was investigated. It was concluded that the porous model for some reactor internal structures could adequately predict the hydraulic characteristics inside the reactor in a qualitative manner. If sufficient computation resource is available, the predicted core inlet flow distribution is expected to be more accurate, by considering the real geometry of the internal structures, especially located in the upstream of the core inlet. Finally, depending on the shape of the flow skirt, the flow distribution was somewhat different locally. The standard deviation of the mass flow rate (${\sigma}$) for the original shape of flow skirt was smaller, than that for the modified shape of flow skirt. This means that the original shape of the flow skirt may give a more uniform distribution of mass flow rate at the core inlet plane, which may be more desirable for the core cooling.

• 대한건축학회논문집:계획계
• /
• 제35권8호
• /
• pp.3-14
• /
• 2019

The research is to track the morphological transformation of residential towers of apartment complexes in Busan. Though apartment is one of the most important components in Korean society, it has not drawn enough attention from academia as well as the public, especially regarding its shape. In result, its morphological change has barely been recognized. Instead, negative, but superficial, evaluation has become dominant tendency to deal with the shape of apartment tower. There are numerous 'partial' evidences to inform the morphological change of apartment plan type, and understanding the change is critical since morphological resultant reflects culture, politics, economy of a society. The research has been done on the 261 apartment complexes built through 2016 in Busan. The analysis shows that $I^0$ type, to represent 'typical boring architectural shape' of Korean apartments, has been dominant until the year 2000. However, its portion has become drastically decreased since the mid-2000. Composite plan type, the geometrical precedents of which had never been existent, emerged in the mid-2000, and this phenomenon may symbolize the change of morphology of apartment. When tower plan types are grouped together according to geometrical shape, three types, I-type, L-type and Y-type, take the most of residential towers, explaining 97% of the total. As expected, I-type is the most dominant, but its influence has decreased as time passes. Y-type might become one of the most important type in the period V. L-type has become the leading type in the Period VI to exceed I-type by 12 percent.

• 대한수의학회지
• /
• 제33권4호
• /
• pp.719-734
• /
• 1993

The electrocardiographic(ECG) parameters on the standard limb leads in the normal Korean native cattle have been measured with a 3 channel Electrocardiograph built in a computed analysis. The study was conducted on the animals 98 heads of mean age of 17.7 months. Conduction parameters, waves, intervals and segments have been recorded. The recordings were analyzed as to shape and amplitude of the P and T waves and the components of the QRS complex. Heart rate was recorded by the Electrocardiogram which were a mean of $80.4{\pm}11.6beats/min$. And the younger had a higher heart rate than the older one. Average conduction times in the RP, the QRS complex and the QTc interval recorded $166.7{\pm}23.1msec.$, $79.7{\pm}8.8msec.$ and $395.5{\pm}30.4msec.$, in the P and T wave duration recorded $70.1{\pm}13.5msec.$ and $97.6{\pm}16.9msec.$, and in the PR and ST segment duration recorded $97.9{\pm}23.5msec.$ and $173.9{\pm}40.3msec.$, respectively. The wave forms in each lead observed various types. The amplitudes of wave type showed the highest frequency in each lead that were analyzed as follow : 1. In P wave, amplitudes of the positive type showed the frequency of 65.3%, 82.7% and 52.0% in leads I, II and III that were $103.1{\pm}47.8{\mu}V$, $115.2{\pm}37.3{\mu}V$ and $67.4{\pm}26.9{\mu}V$, and it showed the frequency of 54.1% and 85.7% in the leads aVL and aVF that were $63.7{\pm}23.0{\mu}V$, $88.0{\pm}83.6{\mu}V$, respectively. Average amplitude of the negative type showed the frequency of 78.6% in lead aVR which was $99.3{\pm}38.0{\mu}V$. 2. Average amplitude of the QRS complex were from $362.8{\pm}177.7{\mu}V$ to $532.8{\pm}253.9{\mu}V$(mean of $449.1{\pm}57.2{\mu}V$) that in all leads except lead I were manifested the Low-Voltage QRS complex(below 0.5mV). Average amplitudes of each wave type in the QRS complex aere $-50.2.4{\pm}258.2{\mu}V$ and $-428.6{\pm}195.1{\mu}V$ in the QS groups type that showed a frequency of 66.3%, 70.4% in the leads I and aVL, were $451.1{\pm}20.4.0{\mu}V$, $387.6{\pm}175.8{\mu}V$ and $299.3{\pm}146.5{\mu}V$ in the R groups type that showed a frequency of 48.0%, 53.1% and 34.7% in the leads III, aVR and aVF, and were $-307.5{\pm}180.3{\mu}V$, $201.4{\pm}77.2{\mu}V$ in the QR wave type which showed a frequency of 39.8% in lead II, respectively. 3. In T wave, amplitude of the positive type showed the frequency of 50.0%, 82.7%, 51.0% and 57.1% in leads II, III aVR and aVF which were $214.9{\pm}115.6{\mu}V$, $188.5{\pm}119.3{\mu}V$, $191.0{\pm}93.7{\mu}V$ and $165.7{\pm}91.9{\mu}V$, and the negative type showed a frequecny of 66.3% and 72.5% in leads I and aVL. that were $221.3{\pm}112.5{\mu}V$, $-173.6{\pm}86.7{\mu}V$, respectively. 4. Amplitude of ST segment in leads I, II and III were a mean of $-12.2{\pm}37.2{\mu}V$, $17.5{\pm}42.6{\mu}V$ and $28.3{\pm}40.4{\mu}V$, in leads aVR, aVL and aVF were $-3.9{\pm}32.5{\mu}V$, $-15.9{\pm}35.6{\mu}V$ and $26.2{\pm}37.5{\mu}V$, respectively.

• Tuberculosis and Respiratory Diseases
• /
• 제42권2호
• /
• pp.218-225
• /
• 1995

연구배경: 기도저항은 body plethysmograph를 이용하여 flow/alveolar pressure의 관계를 측정함으로써 얻어질 수 있는데, 기도저항이 정상인 경우 oscillooscope 상에서 얻어지는 resistance curve가 거의 linear 하나 증가된 경우에는 그 모양이 기울어지거나 loop을 형성하는 경우가 많아 이러한 curve를 분석하여 환자의 임상평가에 도움이 되는 결과를 얻고자 하였다. 방법: 기도저항이 증가되어 있는 환자를 대상으로 body plethysmograph에서 quiet breathing시에 얻어진 resistance curve의 형태를 분석하여 폐기능을 비교하였다. 결과: 1) Resistance curve는 type 1: linear, type 2: ovoid, type 3: sigmoid, type 4: scoop, type 5: paisley의 5가지 형태로 구분할 수 있었으며, 1예를 제외한 type 3과 type 4 및 5는 loop을 형성하였다. 2) Curve의 형태가 특정 질환에 특징적이지는 않았으나 급성질환은 주로 type 1, 및 2, 만성기류폐쇄는 주로 type 3, 4 및 5에 속하였으며, 기관지 천식이나 오래된 폐결핵은 그 정도에 따라 type 1 에서 5까지의 형태를 모두 보였다. 3) Type 1에서 type 5로 갈 수록, loop을 형성 할 수록 기도폐쇄가 심하고 기도저항이 증가되며 잔기량이 커지는 경향을 보였다. 결론: 기도저항을 측정할 경우 기도저항의 측정치 뿐 아니라 resistance curve를 분석하여 기도폐쇄와 air trapping의 정도를 판단하는데 도움을 얻을수 있으며, resistance curve의 모양이 특정 질환에 특징적이지는 않았지만 호기시 loop이 형성되는 경우 심한 기도폐쇄를 시사하였다.

• Applied Microscopy
• /
• 제33권2호
• /
• pp.117-130
• /
• 2003

본 연구는 6 MeV LINAC에서 발생한 X-선을 생쥐 생체에 조사한 후, 방사선 조사선량에 따른 난소 조직의 미세구조적 변화를 광학 및 전자현미경으로 관찰하였다. X-선을 200 cGy의 선량을 조사한 후 적출한 난소조직에서 성장난포의 과립층세포는 핵이 응축되어 나타났고, 난자를 둘러싸고 있는 투명층은 정상 대조군에서보다 경계가 불규칙하게 관찰되었다. 400 cGy로 조사된 난소조직에서 과립층세포는 대부분 응축된 핵을 가지고 있었으며, 피폭된 과립층세포의 사멸에 의한 세포질의 단백질 변성이 확인되었다. 600 cGy의 선량을 조사한 난소의 조직표본에서 성장난포는 위축되어 있었으며, 난포동에는 백혈구가 침윤되어 있었고, 난포액은 정상난포와 달리 불균질한 물질로 채워져 있었다. 투과전자현미경으로 관찰한 결과, 200 cGy의 방사선을 조사한 성장난포에서 과립층세포는 정상난포와는 달리 불규칙한 모양을 하고 있었다. 과립세포 사이의 난포동에는 많은 세포성분의 부스러기가 산재하여 있었으며, 이들 주변에 호중구와 대식세포가 관찰되어, 이 시기에 이미 방사선 피폭에 의한 세포사의 기작이 진행되고 있음이 확인되었다. X-선을 600 cGy로 조사한 난소조직의 과립층세포는 세포의 형태나 핵의 변형이 현저하여, 일부 세포는 핵의 분절화가 진행되는 등, apoptosis의 전형적인 특징이 관찰되었다. 특히 성장난포의 난포동에서는 염증반응에 관여하는 호중구가 잘 관찰되었으며, 주변에 산재된 세포 파쇄물 및 apoptotic body와 함께 대식세포의 출현도 확인되었다.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.8-16
• /
• 2020

In this study, the vibration signal of the mold was measured and analyzed to monitoring the process time and characteristics during injection molding. A 5 inch light guide plate mold was used to injection molding and the vibration signal was measured by MPU6050 acceleration sensor module attached the surface of fixed mold base. Conditions except for injection speed and packing pressure were set to the same value and the change of the vibration signal of the mold according to injection speed and packing pressure was analyzed. As a result, the vibration signal had a large change at three points: "Injection start", "V/P switchover", and "Packing end". The time difference between "injection start" and "V/P switchover" means the injection time in the injection molding process, and the time difference between "V/P switchover" and "Packing end" means the packing time. When the injection time and packing time obtained from the vibration signal of the mold are compared with the time recorded in the injection molding machine, the error of the injection time was 2.19±0.69% and the error of the packing time was 1.39±0.83%, which was the same level as the actual value. Additionally, the amplitude at the time of "injection start" increased as the injection speed increased. In "V/P switchover", the amplitude tended to be proportional to the pressure difference between the maximum injection pressure and the packing pressure and the amplitude at the "packing end" tended to the pressure difference between the packing pressure and the back pressure. Therefore, based on the result of this study, the injection time and packing time of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process variables such as the injection speed, maximum injection pressure, and packing pressure can be evaluated as the change of the mold vibration during injection molding.

• 한국균학회지
• /
• 제38권1호
• /
• pp.16-20
• /
• 2010

송이 감염묘법은 송이 인공재배 방법으로써 높은 잠재성을 가지고 있다. 본 연구실에서는 2001년부터 2004년까지 감염묘를 이식하였으며, 2006년에 확인된 생존율은 20%였다. 송이균이 생존한 이들 감염묘를 대상으로 2009년까지 송이균의 생장 특성과 균환 발달을 조사하였다. 송이균의 생장 크기는 $4\;cm{\times}\;cm$부터 $52\;cm\;{\times}\;35\;cm$ 까지 송이 감염묘 개체 간에 큰 차이를 보였다. 이러한 균환 크기의 다양성은 송이 감염묘의 생산 지역과 식재 지역 간의 환경적 차이에 기인하는 것으로 보인다. 송이 감염묘에서 송이균의 생장은 이식 초기에 곤봉 모양 또는 좁은 'V'자 형태(예각)로 자라던 것이 시간이 지남에 따라 좀 더 넓은 'V'자 형태(둔각)로 발전하였다. 본 조사를 통해 확인된 몇 개의 송이 감염묘의 균환으로부터 2010년 가을에는 송이 자실체가 발생할 것으로 기대된다.

• 치과방사선
• /
• 제21권2호
• /
• pp.297-306
• /
• 1991

The purpose of this study is to improve the availabilities of radiographic technics as diagnostic methods to evaluate maxillary sinus in dental clinic. For the morphologic study of maxillary sinus, 20 dry maxillas were used and intraoral standard views, orthopantomograms, and skull P-A views were taken. For measuring the vertical image magnification rates, 5 sites in maxillary molar regions of 5 dry mandibles were selected radndomly and 25 wires of the determined sizes for selected portions were attached to the sites, after then, intraoral radiograms with bisecting technic and orthopantomograms were taken. The acquired results were as follows: 1. The anterior extension of the maxillary sinus on orthopantomogram was the distal side of the canine in 45.45% of subjects, the mesial side of the canine in 27.27%, the lateral incisor in 9.09%, the mesial side of the 1st premolar in 9.09%, and the mesial side of the 2nd pre-molar in 9.09%. 2. The positional relationship between the floor of maxillary sinus and the apex of alveolar socket revealed superimposed type in 58.3% of subjects, approached type in 33.3%, and separated type in 8.4%. 3. The morphology of inferior border of maxillary sinus was simple V or U shape in edentulous stage and V or wide U shape in alveolar socket stage. 4. The vertical image length on intraoral film taken by bisecting technic was magnified by 27.23% on the average and the length on orthopantomogram by 12.35%. 5. The inferior borders of maxillary sinus coinciding with each of the areas bearing the anterior and the posterior teeth on skull P-A view were determined.

• 한국의상디자인학회지
• /
• 제14권1호
• /
• pp.43-59
• /
• 2012

The purpose of this study was to compare knitwear design preferences and purchase behaviors of university students by sex. The subjects were 493 university students in Daejeon and Gongju provinces. The research method was a survey and measurement instruments were 16 stimuli which were manipulated of knitwear shape and self-administrated questionnaire (knitwear design preference items, knitwear favorite image items, purchase behavior items and subject' demographic attributions). Data were analyzed by factor analysis, frequency analysis, t-test, Cronbach' ${\alpha}$ using SPSS program. The results of the study were as follows. First, as for pullover designs according to pullover shape factors, male preferred classic design with normal round neck, set-in sleeves and normal length, whereas female preferred various designs with normal round, normal V or deep V neck, set-in sleeves and normal or long length. Second, there was significant difference by sex in knitwear patterns and materials. Male preferred geometric patterns and 100% cotton, whereas female preferred natural patterns and blended cotton. Third, 4 factors were emerged on knitwear favorite images(casual image, modem classic image, active image and characteristic image). Especially, there was significant difference by sex in active image. Male preferred active image, whereas female did not. Fourth, as for knitwear purchases, male considered fitting as important purchase criteria, whereas female considered design or style. Male used department stores for purchasing, whereas female used Bosejeom for independent fashion. Male preferred high quality knitwear to female.

• 대한화학회지
• /
• 제50권6호
• /
• pp.440-446
• /
• 2006

액체상태에 분산된 ZnO 분말을 레이저 ablation 시켜 ZnO 나노입자를 생성하였고, 계면활성제에 따른 생성된 나노입자의 특성을 비교하였다. 생성된 나노 입자는 UV-VIS 흡광 스펙트럼과 X-ray 회절 스펙트럼으로 순수한 ZnO 결정 상태를 나타냄을 확인하였으며, 전자투과 현미경 사진으로 나노입자의 크기, 크기 분포 및 모양을 관찰하였다. 순수한 물에서 얻어진 ZnO 나노입자의 밴드 갭 에너지는 3.35 eV로 bulk ZnO와 비슷한 값을 나타내었으며, 평균 크기는 27 nm로 막대모양의 입자들이 주로 생성되었다. SDS 용액에서 얻어진 ZnO 나노입자는 입자 크기가 평균 28 nm인 주로 구형에 가까운 형태를 가졌으며 CTAB 용액에서 나노입자는 막대 모양의 형태가 많으며 평균 크기가 40 nm 이었다. CTAB 용액에서 만들어진 ZnO 나노입자는 SDS 용액에서 만들어진 ZnO 나노입자 보다 더 안정하였다. 이러한 계면활성제에 따른 ZnO 나노입자의 크기 및 모양, 그리고 안정성의 차이는 ZnO와 계면활성제 사이의 전하 극성 차이로 인한 정정기적 인력과 용매화 차이로 설명할 수 있었다.