• The Plant Pathology Journal
• /
• v.15 no.5
• /
• pp.280-286
• /
• 1999

Lichen-forming (LFF) or lichenicolous fungi (LCF) were isolated from the lichens collected at‘Backwoon’mountain area,‘Chiri’mountain area and‘Sorok’island in the southern regions of Korea and were screened for antagonistic efficacy against several phyto-pathogenic fungi. Symbiotic algae-free LFF and LCF were isolated by the following methods: I) discharged spores (ascospores), II) macerated thallus suspension and III) direct use of thallus fragments. Among 58 isolates obtained from 34 lichens, 8 isolates showed antifungal activity against Rhizoctonia solani. Antifungal activities of the strongest antagonistic isolate (LB9810) originated from the thallus of Parmelia quercina lichen were evaluated against 15 phyto-pathogenic fungi. When crude methanol extract of mycelia of the LB8910 isolate was employed at the rate of 0.5% (v/w), fungal growth of Magnaporthe grisea and Rhizoctonia solani was severly and Rhizoctonia solani was severly inhibited as much as approximately 60% compared to control. Growth of various food-borne same extract. The extract was successively partitioned with n-hexane, ethyl acetate and n-butanol. n-Hexane fraction displayed the strongest antifungal activities against R. solani. The LB9810 isolate was finally identified as Fusarium equiseti (Corda) Sacc., which has not been reported as LFF or LCF yet. Therefore, it is very likely that F. equiseti isolated it the study was originated from the contaminants associated with thallus fragments rather than from LFF or LCF.

• Korean Journal of Dental Materials
• /
• v.43 no.1
• /
• pp.81-89
• /
• 2016

The purpose of this study was to evaluate the effect of the experimental and commercial fluoride varnishes on the Vickers hardness of bovine teeth. The experimental fluoride varnishes with 5 wt.% NaF were fabricated using Bis-GMA or rosin as the resin base. The components were mixed with over-head stirrer under warming up in a double boiler for 30 minutes. Four commercial fluoride varnishes (V-varnish, Flor-opal, Cavity shield, Fluor protector) were compared with the experimental fluoride varnishes. Vickers hardness was measured on the labial surface of bovine anterior teeth after applying fluoride varnish on 5th and 30th day. The surface of bovine teeth was observed with a scanning electron microscope before and after applying fluoride varnish and the change of the components on the bovine teeth surface was measured with EDX. In terms of hardness, the experimental rosin-based fluoride varnish showed significantly higher hardness on the 5th and 30th day than the control (bovine teeth without fluoride treatment)(p<0.05). EDX results showed that the fluoride content on the surface of bovine teeth treated with the experimental rosin-based fluoride varnish was highest on the 1st and 10th day. The higher hardness and fluoride content of experimental rosin-based fluoride varnish can be considered to be used as an effective fluoride varnish to prevent dental caries.

• Computers and Concrete
• /
• v.27 no.3
• /
• pp.241-252
• /
• 2021

An experimental program was conducted to investigate the fresh properties, mechanical properties and durability characteristics of the self-compacting mortars (SCM) produced with pumice powder and Artificial Lightweight Fine Aggregate (aLWFA). aLWFA was produced by using fly ash. A total of 16 different mixtures were designed with a constant water-binder ratio of 0.37, in which natural sands were partially replaced with aLWFA and pumice powder at different volume fractions of 5%, 10% and 15%. The artificial lightweight aggregates used in this study were manufactured through cold bonding pelletisation of 90% of class-F fly ash and 10% of Portland cement in a tilted pan with an ambient temperature and moisture content. Flowability tests were conducted on the fresh mortar mixtures beforehand, to determine the self-compacting characteristics on the basis of EFNARC. To determine the conformity of the fresh mortar characteristics with the standards, mini-slump and mini-V-funnel tests were carried out. Hardened state tests were conducted after 7, 28 and 56 days to determine the flexural strength and axial compressive strength respectively. Durability, sorptivity, permeability and density tests were conducted at the end of 28 days of curing time. The test results showed that the pumice powder replacement improved both the fresh state and the hardened state characteristics of the mortar and the optimum mixture ratio was determined as 15%, considering other studies in the literature. In the aLWFA mixtures used, the mechanical and durability characteristics of the modified compositions were very close to the control mixture. It is concluded in this study that mixtures with pumice powder replacement eliminated the negative effects of the aLWFA in the mortars and made a positive contribution.

• Journal of Life Science
• /
• v.19 no.6
• /
• pp.765-769
• /
• 2009

Recent studies have reported that the distribution of HPV-16 sequence variation differs geographically, and more specifically that HPV-16 E6/E7 intratypic variants might carry a high risk for development of ICC (invasive cervical cancer) and CIN (cervical intraepithelial neoplasia) in a given population. To investigate the genetic diversities of HPV-16 E6/E7 oncogene by region, we collected nineteen HPV-16 isolates from sexually high-risk women in Busan, and analyzed the HPV-16 E6/E7 coding regions (nt 34 to 880) with HPV-16 E6/E7 specific PCR amplification. At the nucleotide levet eleven variants of the E6 genes and nine variants of the E7 genes were identified as follows: E6 T178G (n=l1), E6 T178A (n=l), E6 T350G (n=3), E6 A442C (n=2), E6 AI04T, E6 All1G, E6 C116T, E6 G145T, E6 T183G, E6 C335T, E6 G522C and E7 A647G (n=12), E7 A645C, E7 A777C, E7 G663A, E7 T732C, E7 T760C, E7 A775T, E7 T789C and E7 T795G, respectively. At the amino acid levet the isolated HPV-16 E6 and E7 genes showed eleven E6 variants: E6 D25E (n=12), E6 L83V (n=4), E6 E113D (n=2), E6 MIL, E6 Q3R, E6 P5S, E6 Q14H, E6 D25N, E6 127R, E6 H78Y, E6 C140S and three E7 variants: N29S (n=12), L28F, T72S. HPV16 E6 L83V, the dominant variant in the Caucasian population, showed relatively low frequencies in our study population. We elucidated that the dominant HPV-16 E6/E7 variants were HPV-16 E6 D25E (63.2%) and HPV-16 E7 N29S (63.2%), which were phylogenetically included in Asian lineage. Further study is needed to evaluate the risk of cervical cancer related HPV-16 E6/E7 intratypic variants in the Korean population.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.922-928
• /
• 2010

There is a little information on the effect of calcium cloride ($CaCl_2$) which is used as deicing salt in Korea on the physiological responses of the street trees. Prunus sargentii is one of the most widespread tree species of street vegetation in Korea. In this study, the effect of $CaCl_2$ on photosynthetic apparatus such as chlorophyll fluorescence image and light response curve of P. sargentii in relation to their leaf and root collar growth responses were investigated. To study the effect of $CaCl_2$ treatment in the early spring, we irrigated twice in rhizosphere of P. sargentii (3-year-old) planted plastic pots with solution of 0.5%, 1.0%, 3.0% $CaCl_2$ concentration before leaf expansion. Results after treatments, total chlorophyll contents and the chlorophyll a/b, photosynthetic rate, quantum yield, dark respiration decreased with increasing $CaCl_2$ concentration. On the contrary, light compensation point increased with increasing $CaCl_2$ concentration. Through the linear regressions of correlation of photosynthetic rate with photosynthetic parameters (quantum yield, dark respiration and light compensation point), we found a significant relationship (p<0.05) between photosynthetic rate and quantum yield and light compensation point except dark respiration. Calcium cloride ($CaCl_2$) induced inhibition of photochemical efficiency ($F_v/F_M$) and non-photochemical quenching (NPQ) were found in treatments of $CaCl_2$, and these reduction rates between control and CaCl2 treatments were drastically showed at 80 days. We suggest that physiological activities are limited from treatment of $CaCl_2$. These reductions of photosynthetic apparatus ability caused eventually the reduction of leaf and diameter at root collar growth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.5
• /
• pp.671-676
• /
• 2008

Forty-eight Naemi lambs (avg. BW 31.7 kg) were transported by truck for a distance of 1,450 km from Al-Jouf to Riyadh, Saudi Arabia. On arrival day, the lambs were randomly allocated to four groups receiving diets supplemented with 0.0, 0.3, 0.6 and 0.9 ppm organic chromium (Cr). Each group consisted of four separately housed replicates of three lambs each. The animals were fed ad libitum on a grower diet for 84 days. Blood samples were obtained shortly before transportation, upon arrival and at weekly intervals thereafter from all lambs for analysis of plasma and serum. Plasma glucose and serum cortisol, total protein, albumin, urea-N and total cholesterol concentrations were determined. A cursory clinical examination of the lambs, along with rectal temperature, was undertaken at different intervals during the experiment. The lambs were inoculated each with 2 ml i.v. chicken red blood cells (CRBC) on days 0, 21, and 42. Serum total, IgG and IgM antibody titers were determined at weekly intervals post-immunization. An in vivo intradermal hypersensitivity test was carried out on 6 lambs from each group on days 10 and 70. Transportation of the lambs resulted in a significant (p<0.001) elevation of serum cortisol, total protein and albumin levels, as well as increased plasma glucose concentration, with corresponding decrease in total cholesterol, while blood urea-N remained largely unchanged. These constituents returned to normal levels during subsequent weeks, with no significant differences in their concentrations being observed between the Cr-supplemented groups and controls. Rise in rectal temperature after transportation was reduced to a greater extent (p<0.05) in Cr-supplemented versus control lambs. Total, IgG and IgM antibody titers against CRBC rose significantly (p<0.05) during immunizations in all groups, with significantly and linearly higher (p<0.05) total and IgG titers in Cr-supplemented versus control lambs. By contrast, no significant effect due to Cr supplementation was recorded in IgG titers, which increased equally in Cr-fed and control groups. Skin thickness in response to intradermal inoculation of phytohaemagglutinin (PHA) was also significantly (p<0.01) increased as a result of Cr supplementation. These results indicate that dietary Cr supplementation might be useful during stress especially for enhancing immune responses in transport-stressed lambs.

• Parasites, Hosts and Diseases
• /
• v.27 no.1
• /
• pp.35-40
• /
• 1989

It is well known that the duodenum of mice or rats infected with Fibricoln seoulensis shows atrophy of villi (shortening, blunting, widening, fusion) and hyperplasia of crypts. This study was performed to observe healing process of .these pathological changes after deworming with anthelmintic treatment. Albino rats infected each with.1,000 metacercariae of F. seeulensis were treated with single dose of 10 mg/kg praziquantel on day 15 post·infection. On day 1, 3, 5, 7, 15, 21 and 28 after the treatment, they were sacrificed and their duodenums were histopathologically studied. Control (uninfected) rats showed their normal finger-like projections of duodenal villi and well arranged crypts. In comparison, untreated (infected) contiols revealed severe mucosal changes characteristic of villous atrophy and crypt hyperplasia in their duodenum. The damaged duodenal mucosa was found to restore its normal morphology after praziquantel treatment; until day 3 post-treatment the mucosa was severely atrophied; on day 5 long and slender villi sometimes appeared among the fused and stout ones; after day 15 the villi were in their normalising process. From this experiment, it was shown that the mucosal changes in the duodenum of rats caused by F. seoulensis infection were completely reversible in 21∼28 days after anthelmintic treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.675-686
• /
• 2007

Statement of problem: Titanium nitride(TiN) coatings are the most general and popular coating method and used to improve the properties of metallic surface for industrial purposes. When TiN coating applied to the abutment screw, frictional resistance would be reduced, as a results, the greater preload and prevention of the screw loosening could be expected. Purpose: The purpose of this study was to investigate mechanical properties of TiN coated film of various coating thickness on the titanium alloy surface and to evaluate proper coating thickness. Material and method: 95 Titanium alloy (Ti-6Al-4V) discs of 15 mm in diameter and 3 mm in thickness were prepared for TiN coating and divided into 7 groups in this study. Acceding to coating deposition time (CDT) with TiN by using Arc ion plating, were divided into 7 groups : Group A (CDT 30min), Group B (CDT 60min), Group C (CDT 90min), Group D (CDT 120min), Group E (CDT 150min), Group F(CDT 180min) and Group G (no CDT) as a control group. TiN coating surface was observed with Atomic Force Microscope(AFM), field emission scanning electron microscopy(FE-SEM) and examined with scratch tester, wear tester. Result: 1. Coating thickness fir each coated group was increased in proportion to coating deposition time. 2. Surface of all coated groups except Group A was homogeneous and smooth. However, surface of none coated Group G had scratch. 3. Adhesion strength for each coated group was increased in proportion to coating deposition time. 4. Wear resistance for each coated group was increased in proportion to coating deposition time. 5. Surface roughness in Group A, B, C was increased in proportion to coating deposition time. But, surface roughness in Group D, E, F was showed decreased tendency in proportion to coating deposition time. Conclusion: According to coating deposition time, mechanical properties of TiN coated film were changed. It was considered that 120 minutes coating deposition time ($1.32{\mu}m$ in coating thickness) is necessary.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.15-22
• /
• 2012

A performance index of singalized intersections is a standard to optimize signal control variables and to manage traffic flow. Traffic delays is generally used to minimize the average delay time on intersections or networks, progression efficiency is used to improve travel speed of main cooridors or to provide transit signal priority. We manage traffic flows with only selecting one index between delays and progression according to the objective of traffic management and field characteristics. In real field, the driver's satisfaction is high in any performance criteria when the waiting time is shorter and the unnecessary stop in front of traffic is smaller. This paper aims to develop simulation model to represent real progression with concurrently considering delays and progression. In order to reflect an effect of level of traffic volumes and residual queues which don't be considered in prior progression model, we apply shockwave model with flow-density diagram. We derive Cell Transmission Model of Daganzo in order to develop the delay index and the progression index for the macroscopic simulation model. In order to validate the effect, we analysis traffic delays and progression efficiency with comparing this model to Transyt-7F and PASSER V.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.209-216
• /
• 2019

Objective: We compare the effects of three different approved sources of supplemental zilpaterol on growth-performance responses and carcass characteristics of finishing lambs. Methods: Twenty four Pelibuey${\times}$Katahdin lambs ($46.75{\pm}2.43kg$) were used in a 33-day feeding trial. Lambs were fed a dry rolled corn-based finishing diet. Treatments consisted of the non-supplemental basal diet (Control) versus the basal diet supplemented with 125 mg zilpaterol/kg of diet (as fed basis) from three commercial sources marketed in Mexico: Zilmax (ZIL), Grofactor, and Zipamix. Results: Compared to controls, zilpaterol (ZH) supplementation did not affect dry matter intake (DMI), but increased carcass adjusted daily weight gain (ADG, 36.7%), gain efficiency (34.2%), and dietary net energy (26.0%), and decreased (23.4%) the ratio of observed:expected DMI. Compared to controls, supplemental ZH increased hot carcass weight (6.4%), dressing percentage (3.2%), m. longissimus thoracis (LM) area (15.6%), and shoulder muscle:fat ratio (28.7%), but decreased kidney-pelvic-heart fat, and fat thickness. Supplemental ZH increased 10.9% and 14.3% whole cut weight of loin and leg, respectively, and the proportion (as percentage of cold carcass weight) of leg (4.3%). These increases were reflected in greater forequarter and hindquarter weights. Lambs fed ZH increased (4.6%) empty body weight (EBW) and reduced (14.7%) liver/spleen weight (as g/kg EBW). Likewise, ZH supplementation tended (p = 0.08) to lower (8.9%) visceral fat. Growth performance, energetic efficiency, hot carcass weight, dressing percentage, LM area and whole cuts were not different across supplemental ZH sources. However, compared with non-supplemented controls, only ZIL appreciably decreased carcass fat distribution, including fat thickness, percentage kidney pelvic and heart fat, shoulder fat, and visceral fat. Conclusion: Supplemental ZH increases ADG, gain efficiency, carcass dressing percentage, and LM area. The magnitude of these responses was similar among ZH sources. Nevertheless, compared with non-supplemented controls, only ZIL appreciably decreases carcass fat. The basis for this is uncertain, but indicative that some practical differences in zilpaterol bio-equivalency may exist across commercial sources tested.