• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.269-274
• /
• 2007

A prior fundamental study was executed using a constant volume chamber (CVC) to improve the burning characteristics of lean pre-mixture by the injection of active radicals generated in the sub-chamber of the CVC. The Radical ignition (RI) technique shows remarkable progress in the burning velocity and combustible lean limit compared with the results of the spark ignition (SI) technique. The optimum design value of the sub-chamber geometry is near $0.11cm^{-1}$ for the ratio of the total area of the holes to the sub-chamber volume $(A_h/V_s)$. In this study, based on the former experimental results, the additional works have been performed to examine the effects of the geometry change in the number $(N_h)$, the total section area $(A_h)$, and diameter $(D_h)$ of the passage holes on the combustion characteristics in the CVC. Also ambient conditions such as the initial temperature and the initial pressure of the mixture were selected as experimental parameters and the effects of residual gas at the chamber on the combustion characteristics were investigated. As a result, the correlation between the passage hole number and overall passage hole area was grasped. The effects of the initial temperature were significant, but on the other hand, those of the initial pressure were weak. A more detailed analysis on the residual gas is required in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.375-383
• /
• 2005

An experiment was conducted to study the protective role of polyherbal feed supplement (Growell) during induced mycotoxicosis in broilers. A total of 240 Vencobb broilers were divided at day old stage into eight equal groups. Group A served as control and was given plain feed, group B, D, F and H were given Growell at 0.35 g/kg of feed. Group C, D, G and H were given dietary aflatoxin $B_1$ at 0.2 ppm and groups E, F, G and H were given ochratoxin A at 0.2 ppm in feed to study effect of Growell on individual aflatoxicosis, ochratoxicosis and combined mycotoxicosis of broilers. The chicks were given their respective feeds from 1st day to 6th week of age and were vaccinated at 7th and 28th day of age with Lasota strain of Newcastle disease virus. There was no statistically significant effect of mycotoxins individually or in combination on body weight of broilers. However, body weights were highest in group B and lowest in co-mycotoxicated group G. Feed conversion ratio was best in group B followed by A, D, F, E, H and G. Significant improvement in haemoglobin values was observed in broilers due to feeding of Growell in ochratoxin and co-mycotoxicated groups. There was no significant effect of mycotoxin treatment on PCV, TEC and TLC of broilers. Due to single and combined mycotoxicosis, there was reduction in serum total protein, albumin, cholesterol and triglyceride and rise in alkaline phosphatase, creatinine and uric acid levels. Supplementation of diets with Growell reduced the alterations induced due to mycotoxins. There was a significant rise in per cent organ weight of liver and reduction of that of spleen, bursa of Fabricius and thymus of broilers fed mycotoxins. Protection from alteration in per cent organ weight of these organ by supplementation of Growell was recorded. The observed impaired immune response and histopathological changes in liver, kidney, spleen, bursa of Fabricius and thymus of broilers given mycotoxins were protected by supplementation of Growell.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.3
• /
• pp.399-406
• /
• 2015

In this study, we developed a composite filler comprising cross-linked hyaluronic acid (HA) and human collagen (COL) derived from the human umbilical cord with the aim of improving its biocompatibility and longevity compared with commercially available fillers. After HA/COL composite fillers were made in two different ratios (10:1 and 5:1), the physical properties of the fillers were evaluated. The interior morphologies and in vivo weight change of these hydrogels were also characterized at 1-16 weeks after injection into mice. To evaluate their biocompatibility and durability in vivo, we injected the composite fillers into nude mice subcutaneously. The variations of injected gel weight were measured and compared with the commercial dermal fillers (Restylane and TheraFill). The composites showed improved or similar physical properties (complex viscosity of 19-22 × 10⁵ cP, and injection force of 10-12 N) over the commercial dermal fillers. Sixteen weeks following the injection, the ratio of remaining composite filler weight to initial weight (75.5 ± 16.9%; 10:1) was shown to be greater than that of the commercial fillers (43.2 ± 8.1%, Restylane; 12.3 ± 5.3%, TheraFill). In addition, immunohistochemical analysis with angiogenesis-related markers such as isolectin and vWF revealed newly formed blood vessels and cellular influx into the composite filler, which were not observed in the other fillers. These results clearly suggest that the HA/COL composite filler is a superior candidate for soft tissue reconstruction. The filler we developed may be a suitable candidate as an injectable dermal filler for tissue augmentation in humans.

• Biomolecules & Therapeutics
• /
• v.26 no.3
• /
• pp.328-334
• /
• 2018

Because of the unsatisfactory treatment options for breast cancer (BC), there is a need to develop novel therapeutic approaches for this malignancy. One such strategy is chemotherapy using non-toxic dietary substances and botanical products. Studies have shown that Panduratin A (PA) possesses many health benefits, including anti-inflammatory, anti-bacterial, anti-oxidant and anticancer activities. In the present study, we provide evidence that PA treatment of MCF-7 BC cells resulted in a time- and dose-dependent inhibition of cell growth with an $IC_{50}$ of $15{\mu}M$ and no to little effect on normal human MCF-10A breast cells. To define the mechanism of these anti-proliferative effects of PA, we determined its effect critical molecular events known to regulate the cell cycle and apoptotic machinery. Immunofluorescence and flow cytometric analysis of Annexin V-FITC staining provided evidence for the induction of apoptosis. PA treatment of BC cells resulted in increased activity/expression of mitochondrial cytochrome C, caspases 7, 8 and 9 with a significant increase in the Bax:Bcl-2 ratio, suggesting the involvement of a mitochondrial-dependent apoptotic pathway. Furthermore, cell cycle analysis using flow cytometry showed that PA treatment of cells resulted in G0/G1 arrest in a dose-dependent manner. Immunoblot analysis data revealed that, in MCF-7 cell lines, PA treatment resulted in the dose-dependent (i) induction of $p21^{WAF1/Cip1}$ and p27Kip1, (ii) downregulation of Cyclin dependent kinase (CDK) 4 and (iii) decrease in cyclin D1. These findings suggest that PA may be an effective therapeutic agent against BC.

• Geomechanics and Engineering
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2020

In structures excavated in rock mass, load progressively increases to a level and remains constant during the construction. Rocks display different elastic properties such as E_i and ʋ under different loading conditions and this requires to use the true values of elastic properties for the design of safe structures in rock. Also, rocks will undergo horizontal and vertical deformations depending on the amount of load applied. However, under constant loads, values of E_i and ʋ will vary in time and induce variations in the behavior of the rock mass. In some empirical equations in which deformation modulus of the rock mass is taken into consideration, elastic parameters of intact rock become functions in the equation. Hence, the use of time dependent elastic properties determined under constant loading will yield more reliable results than when only constant elastic properties are used. As well known, rock material will play an important role in the deformation mechanism since the discontinuities will be closed due to the load. In this study, E_i and ʋ values of intact rocks were investigated under different constant loads for certain rocks with high deformation capabilities. The results indicated significant time dependent variations in elastic properties under constant loading conditions. E_i value obtained from deformability test was found to be higher than the E_i value obtained from the constant loading test. This implies that when static values of elastic properties are used, the material is defined as more elastic than the rock material itself. In fact, E_i and ʋ values embedded in empirical equations are not static. Hence, this workattempts to emerge a new understanding in designing of safer structures in rock mass by numerical methods. The use of time-dependent values of E_i and ʋ under different constant loads will yield more accurate results in numerical modeling analysis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.9
• /
• pp.1374-1383
• /
• 2003

The effect of applying edible coating and addition of antioxidants (butylated hydroxyanisole (BHA) plus butylated hydroxytoluene (BHT) in a 1:1 ratio) on pork patties were investigated prior to achieve desired physico-chemical, microbiological and sensory qualities. For this, five treatments were conducted as (i) control (neither coated nor antioxidants treated); (ii) coated without antioxidants treated; (iii) coated and antioxidants added in the batter mix only (100 ppm); (iv) coated and antioxidants added in meat mix (100 ppm) only; and (v) coated and antioxidants added both in the batter mix (50 ppm) and the meat mix (50 ppm). Addition of antioxidants both in the batter mix and the meat mix significantly (p<0.05) reduced the microbial loads and thiobarbituric acid (TBA) values. The TBA values significantly (p<0.05) increased up to day 14 and then progressively increased with the advancement of each interval of storage days up to 28 days. Total plate count significantly (p<0.05) increased with the increase in storage days.Coliform and Staphylococcus aureus were absent throughout the storage days in all samples. Staphylococcus aureus however, were present in the control group at day 14 and in enrobed (coated) patties (without antioxidants treated) at 28th day. Addition of antioxidants to batter mix and meat mix did not substantially enhance bacteriostatic activity. Application of coatings and antioxidants retarded the loss of firmness, flavor, changes in appearance and color, and also other sensory attributes. Control patties were better with respect to microbial quality and TBA values but had poorer sensory quality than coated patties.

• The Journal of Korean Medicine
• /
• v.25 no.1
• /
• pp.1-20
• /
• 2004

Objectives : Based on the analysis of Yin-Yang[음양] characteristics and symptoms, each person is classified into Yin-Yang. Also the validity of the result is statistically analized. Methods : From Feb. to May. 2003, the data were collected through a questionnaire given to 690 patients. The questionnaire was composed of 34 items which were about personality, habit, sweat, response to coldness, thirst, bowel, urine, physical shape, and menstruation for women only. SD(Semantic Differential Technique) used for each item, each item is measured as a contrast of two opposite symptoms. Reliability analysis was used to select items and categories. Based on means of items in each category the Yin-Yang index was developed. The validity of Yin-Yang index was investigated using classification and clustering analysis. In statistical analysis, SPSS V10.0.7 PC was used. Results : The obtained results are summarized as follows: 1) We constructed Yin-Yang index based on the middle point of the sum of categorical means. Then we classified each person into Yin or Yang. 2) To investigate the validity of the distribution of personal Yin-Yang degree, the crosstabulation of results from clustering and classification was used. The hit ratio for classification was much higher than Maximum Chance Criterion($C_{max}$), and concurrence in crosstabulation was successful. Therefore we can infer that the distribution of Yin-Yang was valid. Conclusions : Based on Yin-Yang characteristics and symptoms, we was analyzed personal degree of Yin-Yang, and confirmed the validity of its distribution. Therefore this index can be used further for Bian-Zheng [변증] and classification of the constitution.

• Korean Journal of Materials Research
• /
• v.26 no.1
• /
• pp.47-53
• /
• 2016

Silicon nitride ($SiN_x:H$) films made by plasma enhanced chemical vapor deposition (PECVD) are generally used as antireflection layers and passivation layers on solar cells. In this study, we investigated the properties of silicon nitride ($SiN_x:H$) films made by PECVD. The passivation properties of $SiN_x:H$ are focused on by making the antireflection properties identical. To make equivalent optical properties of silicon nitride films, the refractive index and thickness of the films are fixed at 2.0 and 90 nm, respectively. This limit makes it easier to evaluate silicon nitride film as a passivation layer in realistic application situations. Next, the effects of the mixture ratio of the process gases with silane ($SiH_4$) and ammonia ($NH_3$) on the passivation qualities of silicon nitride film are evaluated. The absorption coefficient of each film was evaluated by spectrometric ellipsometry, the minority carrier lifetimes were evaluated by quasi-steady-state photo-conductance (QSSPC) measurement. The optical properties were obtained using a UV-visible spectrophotometer. The interface properties were determined by capacitance-voltage (C-V) measurement and the film components were identified by Fourier transform infrared spectroscopy (FT-IR) and Rutherford backscattering spectroscopy detection (RBS) - elastic recoil detection (ERD). In hydrogen passivation, gas ratios of 1:1 and 1:3 show the best surface passivation property among the samples.

• Korean Journal of Materials Research
• /
• v.20 no.5
• /
• pp.257-261
• /
• 2010

A non-volatile resistive random access memory (RRAM) device with a Cr-doped $SrZrO_3/SrRuO_3$ bottom electrode heterostructure was fabricated on $SrTiO_3$ substrates using pulsed laser deposition. During the deposition process, the substrate temperature was $650^{\circ}C$ and the variable ambient oxygen pressure had a range of 50-250 mTorr. The sensitive dependences of the film structure on the processing oxygen pressure are important in controlling the bistable resistive switching of the Cr-doped $SrZrO_3$ film. Therefore, oxygen pressure plays a crucial role in determining electrical properties and film growth characteristics such as various microstructural defects and crystallization. Inside, the microstructure and crystallinity of the Cr-doped $SrZrO_3$ film by oxygen pressure were strong effects on the set, reset switching voltage of the Cr-doped $SrZrO_3$. The bistable switching is related to the defects and controls their number and structure. Therefore, the relation of defects generated and resistive switching behavior by oxygen pressure change will be discussed. We found that deposition conditions and ambient oxygen pressure highly affect the switching behavior. It is suggested that the interface between the top electrode and Cr-doped $SrZrO_3$ perovskite plays an important role in the resistive switching behavior. From I-V characteristics, a typical ON state resistance of $100-200\;{\Omega}$ and a typical OFF state resistance of $1-2\;k{\Omega}$, were observed. These transition metal-doped perovskite thin films can be used for memory device applications due to their high ON/OFF ratio, simple device structure, and non-volatility.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.449-453
• /
• 2003

Ferroelectric YMnO$_3$ thin films were etched with Ar/Cl$_2$ and CF$_4$/Cl$_2$ inductively coupled plasma (ICP). The maximum etch rate of YMnO$_3$ thin film was 300 $\AA$/min at a Ar/Cl$_2$ gas mixing ratio of 2/8, a RF power of 800 W, a DE bias of 200 V, a chamber pressure of 15 mTorr, and a substrate temperature of 30 $^{\circ}C$. From the X-ray photoelectron spectroscopy (XPS) analysis, yttrium etched by chemical reactions with Cl radicals assisted by Ar ion bombardments in Ar/Cl$_2$ plasma. In CF$_4$/Cl$_2$ plasma, yttrium are remained on the etched surface of YMnO$_3$ and formed of nonvolatile YF$_{x}$ compounds manganese etched effectively by chemical reactions with Cl and F radicals. From the X-ray diffraction (XRD) analysis, the (0004) diffraction peak intensity of the YMnO$_3$ thin film etched in Ar/Cl$_2$ plasma shows lower value than that in CF$_4$/Cl$_2$ plasma. It indicates that the crystallinty of YMnO$_3$ thin film is more easily damaged by the Ar ion bombardment than the changes of stoichiometry due to nonvolatile etch by-products.s.