• 제목/요약/키워드: V/C ratio

검색결과 1,328건 처리시간 0.031초

First report of a bacteriovorus nematode, Diploscapter coronatus (Cobb, 1893) Cobb, 1913 (Rhabditida: Diploscapteridae), in Korea

  • Kang, Heonil;Eun, Geun;Ha, Jihye;Park, Namsook;Choi, Insoo;Kim, Donggeun
    • Journal of Species Research
    • /
    • 제6권2호
    • /
    • pp.177-180
    • /
    • 2017
  • Diploscapter coronatus (Cobb, 1893) Cobb, 1913 was first reported on oriental melon (Cucumis melo vars. makuwa Makino) roots from plastic film houses, Gyeongsangbuk-do, Andong, Korea (latitude $N36^{\circ}33^{\prime}$. longitude $E128^{\circ}29^{\prime}$). Diploscapter coronatus is most similar to D. pachys. Species in the genus Diploscapter have a visibly annulated cuticle. The stoma of D. coronatus is 1.5 times longer than the lip region width. The pharyngeal corpus is clearly separated from the isthmus and the vulva is situated around the mid-body. However, it differed by higher ratio of "a", filiform tail and had relatively blunt labial hooks. The Korean population is well matched and within the range of D. coronatus as described from Iran and Ethiopia in de Man's of L, b, c, c', and V. Female length, however, varied between populations: the Ethiopia population female length is longer than in the Korea population (396.4 vs 427.0) while females in the Iran population are smaller than in the Korea population (396.4 vs 350.0). Nematode size may vary due to environmental conditions such as food sources. The position of excretory pores in the Korean population were shorter 53.9-72.5 than in other populations (67-82 and 70-89). Males were uncommon. Males in the Korean population are smaller than females but larger(356.0) than males in the Indian population (306.0).

A study on the development of high functional food protein ingredient from rice bran (고기능성 쌀단백질 소재 개발 연구)

  • Lee, Eui-Suk;Kim, Ki-Jong;Kim, Jae-Hyeon;Hong, Soon-Taek
    • Korean Journal of Agricultural Science
    • /
    • 제37권1호
    • /
    • pp.61-68
    • /
    • 2010
  • Rice bran proteins from different cultivars(Youngan, Sindongjin, Suwon 511) were extracted with Xylanase using orthogonal analysis method and their functional properties were investigated. The optimum extraction conditions, based on protein content in the extract found to be at 1 wt% xylanase, pH 7 and 50:1, solvent to rice bran ratio(v/w %). Nitrogen solubility indices(NSI) of rice bran protein concentrates were shown a minimum value at pH 4 ranged 2~23%, varied with different cultivars and a maximum (NSI${\geq}$90% for all cultivars) at pH 10. As for water adsorption and fat adsorption capacity, rice bran protein concentrates were shown to be better than Na-caseinate and isolated soy protein, respectively. Emulsifying activities were observed high in order of Na-caseinate>Youngan rice bran protein>Shindongjin rice bran protein>Suwon 511 rice bran protein>isolated soy protein. In general, the surface tension of rice bran protein solution($10^{-3}$ wt%, 5 mM bis-tris, pH 7) was increased with increasing concentrations and found a minimum value near pI. On heating, it was decreased slightly with increasing temperatures up to $70^{\circ}C$ and then increased above $80^{\circ}C$. Addition of sodium chloride was made the surface tension decrease. In conclusion, with Xylanase, rice bran protein concentrate can be successfully extracted from the rice bran of different cultivars and the Youngan rice bran protein was thought to have best functionality among rice cultivars tested. It might be used as a milk protein substitute.

Deposition $Ba_{1-x}Sr_xTiO_3$Thin Films and Electrical Properties with Various Materials Top Electrodes (강유전체$Ba_{1-x}Sr_xTiO_3$ 박막의 제조 및 상부전극재료에 따른 전기적 특성)

  • Park, Choon-Bae;Kim, Deok-Kyu;Jeon, Jang-Bae
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • 제48권6호
    • /
    • pp.410-415
    • /
    • 1999
  • $Ba_{1-x}Sr_xTiO_3$ thin films with various ratio of Sr (X = 0.4, 0.5, 0.6) were grown $Pt/TiN/SiO_2/Si$ subastrate by RF magnetron sputtering deposition. As, Ag, and Cu films were deposited on $Ba_{1-x}Sr_xTiO_3$ thin films as top electrodes by using a thermal evaporator. The electrical properties of $Ba_{1-x}Sr_xTiO_3$ thin films for various compositions were characterized and the physical properties at interface between $Ba_{1-x}Sr_xTiO_3$ thin films and top electrodes were evaluated in terms of the work function difference. At x =0.5, the degradation of capacitance is lower to the other compositions. As negative biasapplied, the specimen with Cu top electrode has board saturation region and low leakage current since work function of Cu is bigger than other electrodes.$ Ba_{0.5}Sr_{0.5}TiO_3$ thin films with Cu top electrode, the dielectric constant was measured to the value of 354 at 1 kHz and the leakage current was obtained to the value of $5.26\times10^{-6}A/cm2$ at the forward bias of 2 V.

  • PDF

The Development of Estimation Model for Iron Compound Originated from Anaerobic Microbial Corrosion (혐기성 미생물부식에 의해 생성되는 철화합물 추정식 개발)

  • Jeon, Seok-Jun
    • Journal of Korean Society on Water Environment
    • /
    • 제18권4호
    • /
    • pp.379-386
    • /
    • 2002
  • In this study, estimation model for iron compound originated from upflow, anaerobic fixed bed reactor, which treats sewage domestic wastewater, was developed. The estimation model was formulated by a mathematical expression which was based on the mass balance. Below the HRT of 60 minute, sulfide concentration combining with iron $FeS_2$ is the highest because the maximum sulfate consumption rate $V_{maxS}$ and half-saturation constant of sulfate $K_{mS}$ exert an important effect on the estimation model as temperature was increased. But increment of $FeS_2$ concentration is weakened above the HRT of 60 minutes and represent the lowest value at the HRT of 108 minutes. It implies that liquid phase distribution ratio of sulfide ${\alpha}r$ becomes lower as temperature was increased. While phosphorus concentration combining with iron $Fe_3(PO_4)_3$ is increased as HRT and temperature are increased, which is affected by phosphorus removal rate constant $k_p$. As the result of estimating the iron concentrations of corrosion by the model, the concentration of iron corrosion is higher than any other at the HRT of 108 minute and $20^{\circ}C$. The predicted values were compared with measured ones at different HRT(13.5, 27, 54, 108 min) and temperature(20, 25, $30^{\circ}C$). The experimental data could be fitted with the simulated curves. Therefore, the mathematical expression could be applicable to design full-scale wastewater treatment plants.

Immune Responses in Broiler Chicks Fed Propolis Extraction Residue-supplemented Diets

  • Eyng, C.;Murakami, A.E.;Santos, T.C.;Silveira, T.G.V.;Pedroso, R.B.;Lourenco, D.A.L.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제28권1호
    • /
    • pp.135-142
    • /
    • 2015
  • This study was conducted to evaluate the effect of inclusion of propolis extraction residue in the feed of broilers from 1 to 21 d of age on phagocytic activity of macrophages, cutaneous basophil hypersensitivity response to phytohemagglutinin, antibody production against Newcastle disease, lymphoid organ weight and hematological profile and to determine the optimal level of inclusion. 120 chicks, reared in metabolism cages until 21 days of age, were distributed in a completely randomized design, with five treatments (0%, 1%, 2%, 3%, and 4% of propolis residue) and six replications. The relative weight of thymus and monocyte percentage were affected by propolis residue, with a quadratic response (p<0.05) and lowest values estimated at 2.38% and 2.49%, respectively. Changes in relative weight of cloacal bursa and spleen, percentage of lymphocyte, heterophil, basophil, eosinophil, and heterophil:lymphocyte ratio, antibody production against Newcastle disease, phagocytic activity of macrophages and the average number of phagocytosed erythrocytes were not observed. The nitric oxide production with regard to positive control (macrophages+erythrocytes) decreased linearly (p<0.05) with increased doses of propolis residue. The remaining variables of nitric oxide production (negative control - macrophages, and difference between the controls) were not affected by propolis residue. The cutaneous basophil hypersensitivity response to phytohemagglutinin as determined by the increase in interdigital skin thickness exhibited a quadratic response (p<0.05), which predicted a lower reaction response at a dose of 2.60% of propolis residue and highest reaction response after 43.05 hours of phytohemagglutinin injection. The inclusion of 1% to 4% of propolis extraction residue in broiler diets from 1 to 21 days of age was not able to improve the immune parameters, despite the modest changes in the relative weight in thymus, blood monocyte percentage, nitric oxide concentration, and interdigital reaction to phytohemagglutinin.

Production of the Copepods Euchaeta plana and Paraeuchaeta russelli in the Southeastern Sea of Korea (한국 동해 남부해역에 출현하는 요각류 Euchaeta plana와 Paraeuchaeta russelli의 생산력)

  • Kim, Garam;Park, Wongyu;Kang, Hyung-Ku
    • Ocean and Polar Research
    • /
    • 제40권3호
    • /
    • pp.115-125
    • /
    • 2018
  • Production from copepodite IV to adult of two euchaetid species Euchaeta plana and Paraeuchaeta russelli was measured at the southeastern sea of Korea from April to November, 2014. The mean density was $2.0ind\;m^{-3}$ for E. plana and $4.1ind\;m^{-3}$ for P. russelli, with the high contribution of copepodite V to total density. The densities of total individuals, adult females and eggs were highest in November for both species. The mean egg production rate (EPR) was $1.7eggs\;female^{-1}\;d^{-1}$ for E. plana and $3.1eggs\;female^{-1}\;d^{-1}$ for P. russelli. Both of them showed the highest EPR in September but zero EPR in summer. The mean weight-specific EPR was $0.038d^{-1}$ for E. plana and $0.079d^{-1}$ for P. russelli. The mean total production rates of E. plana and P. russelli were $5.3{\mu}g\;C\;m^{-3}\;d^{-1}$ and $17.8{\mu}g\;C\;m^{-3}\;d^{-1}$, respectively, with the largest production in November. The mean Production/Biomass ratio was $0.06d^{-1}$ for E. plana and $0.07d^{-1}$ for P. russelli, with its peak in September for both. The total production of E. plana and P. russelli was positively correlated with the density of a copepod Oncaea venusta, rather than chl-a concentration, indicating that the two copepods might be carnivores. This study evaluates the contribution of euchaetids to the copepod community in the southeastern sea of Korea.

Measurement of Antioxidant Activities and Phenolic and Flavonoid Contents of the Brown Seaweed Sargassum horneri: Comparison of Supercritical CO2 and Various Solvent Extractions

  • Yin, Shipeng;Woo, Hee-Chul;Choi, Jae-Hyung;Park, Yong-Beom;Chun, Byung-Soo
    • Fisheries and Aquatic Sciences
    • /
    • 제18권2호
    • /
    • pp.123-130
    • /
    • 2015
  • Seaweed Sargassum horneri extracts were obtained using supercritical carbon dioxide ($SC-CO_2$) and different solvents. $SC-CO_2$ was kept at a temperature of $45^{\circ}C$ and pressure of 250 bar. The flow rate of $CO_2$ (27 g/min) was constant during the entire 2-h extraction period, and ethanol was used as a cosolvent. Six different solvents [acetone, hexane, methanol, ethanol, acetone mix methanol (7:3), and hexane mix ethanol (9:1)] were used for extraction and agitated by magnetic stirring (250 rpm) in the dark at $25^{\circ}C$ for 20 h; the ratio of material to solvent was 1:10 (w/v). Antioxidant properties of S. horneri extracted using $SC-CO_2$ with ethanol and different solvents have shown good activity. The highest activity belongs to $SC-CO_2$ with ethanol extracted oil, showing DPPH, ABTS, total phenolic content, and total flavonoid levels of $68.38{\pm}1.21%$, $83.51{\pm}1.25%$, $0.64{\pm}0.02mg/g$, and $5.57{\pm}0.05mg/g$, respectively. The S. horneri extracts showed a significant correlation between the antioxidant activity and phenolic content. Based on these results, the $SC-CO_2$ extract (ethanol) of the seaweed extract from brown seaweed may be a valuable antioxidant source.

Structural and Optical Properties of Copper Indium Gallium Selenide Thin Films Prepared by RF Magnetron Sputtering

  • Kong, Seon-Mi;Fan, Rong;Kim, Dong-Chan;Chung, Chee-Won
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.158-158
    • /
    • 2011
  • $Cu(In_xGa_{1-x})Se_2$ (CIGS) thin film solar cell is one of the most promising solar cells in photovoltaic devices. CIGS has a direct band gap which varied from 1.0 to 1.26 eV, depending on the Ga to In ratio. Also, CIGS has been studying for an absorber in thin film solar cells due to their highest absorption coefficient which is $1{\times}10^5cm^{-1}$ and good stability for deposition process at high temperature of $450{\sim}590^{\circ}C$. Currently, the highest efficiency of CIGS thin film solar cell is approximately 20.3%, which is closely approaching to the efficiency of poly-silicon solar cell. The deposition technique is one of the most important points in preparing CIGS thin film solar cells. Among the various deposition techniques, the sputtering is known to be very effective and feasible process for mass production. In this study, CIGS thin films have been prepared by rf magnetron sputtering method using a single target. The optical and structural properties of CIGS films are generally dependent on deposition parameters. Therefore, we will explore the influence of deposition power on the properties of CIGS films and the films will be deposited by rf magnetron sputtering using CIGS single target on Mo coated soda lime glass at $500^{\circ}C$. The thickness of CIGS films will be measured by Tencor-P1 profiler. The optical properties will be measured by UV-visible spectroscopy. The crystal structure will be analyzed using X-ray diffraction (XRD). Finally the optimal deposition conditions for CIGS thin films will be developed.

  • PDF

Organic-Inorganic Nanohybrid Structure for Flexible Nonvolatile Memory Thin-Film Transistor

  • Yun, Gwan-Hyeok;Kalode, Pranav;Seong, Myeong-Mo
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.118-118
    • /
    • 2011
  • The Nano-Floating Gate Memory(NFGM) devices with ZnO:Cu thin film embedded in Al2O3 and AlOx-SAOL were fabricated and the electrical characteristics were evaluated. To further improve the scaling and to increase the program/erase speed, the high-k dielectric with a large barrier height such as Al2O3 can also act alternatively as a blocking layer for high-speed flash memory device application. The Al2O3 layer and AlOx-SAOL were deposited by MLD system and ZnO:Cu films were deposited by ALD system. The tunneling layer which is consisted of AlOx-SAOL were sequentially deposited at $100^{\circ}C$. The floating gate is consisted of ZnO films, which are doped with copper. The floating gate of ZnO:Cu films was used for charge trap. The same as tunneling layer, floating gate were sequentially deposited at $100^{\circ}C$. By using ALD process, we could control the proportion of Cu doping in charge trap layer and observe the memory characteristic of Cu doping ratio. Also, we could control and observe the memory property which is followed by tunneling layer thickness. The thickness of ZnO:Cu films was measured by Transmission Electron Microscopy. XPS analysis was performed to determine the composition of the ZnO:Cu film deposited by ALD process. A significant threshold voltage shift of fabricated floating gate memory devices was obtained due to the charging effects of ZnO:Cu films and the memory windows was about 13V. The feasibility of ZnO:Cu films deposited between Al2O3 and AlOx-SAOL for NFGM device application was also showed. We applied our ZnO:Cu memory to thin film transistor and evaluate the electrical property. The structure of our memory thin film transistor is consisted of all organic-inorganic hybrid structure. Then, we expect that our film could be applied to high-performance flexible device.----못찾겠음......

  • PDF

Chemical Variations of Electrum from Gold and/or Silver Deposits in the Southeast Korea (한국 동남부지역 금·은 광상산 에렉트럼의 화학조성)

  • Choi, Seon-Gyu;Park, Maeng-Eon;Choi, Sang-Hoon
    • Economic and Environmental Geology
    • /
    • 제27권4호
    • /
    • pp.325-333
    • /
    • 1994
  • Gold and/or silver mineralization in the southeast province, Korea, occurred in hydrothermal quartz vein that fills fracture zones in Cretaceous volcanic and sedimentary rocks of the Gyeongsang basin or granites and Precambrian gneiss. Most of the gold-silver-bearing veins in the province occur in Hapcheon, Suncheon and Haman-Gunbuk area where they are associated with Cretaceous Bulgugsa granites. On the basis of the Ag/Au ratio on amounts produced and ore grades, mode of occurrence, and associated mineral assemblages, hydrothermal Au-Ag deposits in southeast province, Korea, can be classified as follows: pyrite-type gold deposit (Group IIB, Samjeong and Sangchon deposits), antimony-type gold-silver deposit (Group IV, Gisan and Geochang deposits), and antimony-type silver deposit (Group V, Sanggo, Seweon, Seongju and Gahoe deposits). All of the gold-silver deposits in the province are generally characteristics of the gold-silver or silver-dominant type deposit which contains more silver-bearing minerals than those deposits in central Korea. The gold-silver mineralization in the deposits consist of two generation; the early characterized by gold precipitation and the late represented by silver-rich (as silver-bearing sulfosalts minerals) mineralization. All but one deposit (Samjeong deposit) having relatively lower Au content in electrum values between ${\approx}20$ and ${\approx}50$ atomic %. The mineralogical data on electrum-sphalerite and/or arsenopyrite geothermometry and fluid inclusion data indicate that the gold and silver mineralizations were occurred at temperatures of $190{\sim}280^{\circ}C$ and $150{\sim}180^{\circ}C$, respectively. These suggest that the gold-silver mineralization in the province occurred in the lower temperature and pressure conditions as epithermal-type hydrothermal vein deposit.

  • PDF