• Journal of the Korean Society for Library and Information Science
• /
• v.37 no.2
• /
• pp.107-134
• /
• 2003

This study intends to analyze the utility of library catalogs from library users 'point of view. Emphasis was on verifying how useful library catalogs are as a tool in order to satisfy the information need of library users. To the end, this study developed the criteria and indicators that can be used to measure the utility of library catalogs from users' viewpoint. On the basis of it, the utility of library catalogs was measured systematically. Sample catalog records for the utility verification were selected from 6 most representative university libraries in Korea. The result of verification was presented and described with the typical examples, and the key factors that caused the low utility of library catalogs were a]so identified and discussed.

• Plant Journal
• /
• v.13 no.2
• /
• pp.39-45
• /
• 2017

This paper is a study on FEED validation model that can be used in the bidding stage of small utility equipment in offshore plant industry using system engineering technique. Currently, domestic marine plant equipment industry companies are faced with the financial risk of project execution as they enter marine plant. The major cause was the insufficient ability to verify the FEED output from the contractor (Engineering or Procurement and Construction) of the equipment manufacturer (COMPANY or EPC). Therefore, we propose FEED design verification method that simplifies the system engineering method that sequentially applies requirements analysis, function, performance analysis and physical architecture building process. Also, we verified the suitability of the developed model by comparing the results of applying the developed FEED verification model and the verification method that depends on the existing experience for the small utility equipment (Air Compressor).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.388-396
• /
• 2011

Mission Equipment Package(MEP) system is a collection of avionic components that are integrated to perform the mission of the Korean Utility Helicopter(KUH). MEP system development is classified mission-critical embedded system but KUH MEP system developed including flight-critical data implementation. It is important to establish the good development and verification process for the successful system development. This paper describe the development and verification process in each phase for the KUH MEP system. MEP system design is verified through the qualification test, system failure test and compatibility test in System Integration Laboratory(SIL).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.146-153
• /
• 2013

Visual information and aural warning of independent aircraft survivability equipment increase the pilot workload and limit the effective countermeasures. For increase the aircraft survivability, Integrated design of survivability display and aural warning need to consider pilot intuitions. If pilot aware the threat by intuition, evade or escape from the threat using the countermeasures equipment, it will increase the survivability. This paper describe the design and verification of for Utility Helicopter survivability equipment.

• Land and Housing Review
• /
• v.11 no.3
• /
• pp.93-101
• /
• 2020

Recently, as a BIM-based construction simulation system, 4D CAD tools using virtual reality (VR) objects are being applied in construction project. In such a system, since the expression of the object is based on VR image, it has a sense of separation from the real environment, thus limiting the use of field engineers. For this reason, there are increasing cases of applying augmented reality (AR) technology to reduce the sense of separation from the field and express realistic VR objects. This study attempts to develop a methodology and BIM module for the pre-construction verification system using AR technology to increase the practical utility of VR-based BIM objects. To this end, authors develop an AR-based drawing verification function and drawing object-based 4D model augmentation function that can increase the practical utility of 2D drawings, and verify the applicability of the system by performing case analysis. Since VR object-based image has a problem of low realism to field engineers, the linking technology between AR object and 4D model is expected to contribute to the expansion of the use of 4D CADsystem in the construction project.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1597-1603
• /
• 2017

The incidence of fire in underground utility tunnel is lower than other fires, but the damage caused by fire can cause social loss due to social management paralysis as well as economic loss. Hereupon, this paper presents the results of an empirical test on the construction of the underground utility tunnel condition monitoring system using the leakage coaxial cable installed in the underground utility tunnel. For this reason, a verification test was conducted by connecting a inductive coupler 200 Mbps power line communication modem with insertion loss characteristics of $-6{\pm}2dB$ to the installed the leakage coaxial cable installed in the underground utility tunnel. As a result, We confirmed sending/receiving of IP cameras up to 500 m. Therefore, it is judged that it is possible to construct a condition monitoring system for underground utility tunnel by using the leakage coaxial cables installed in the underground utility tunnels without installing additional communication lines for data transmission.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.1
• /
• pp.145-149
• /
• 2019

Various supplementary authentication methods are used to supplement user authentication and authorization provided by existing password verification online1. In recent years, authentication and authorization methods using user attribute information have been studied and utilized in various services. User attribute information can be divided into static information and dynamic information. The existing methods focus on research to identify users using dynamic information or to generate challenge questions for user reauthentication. Static information such as a user's home address, school, company, etc. is associated with dynamic information such as location information. We propose a method to verify user attribute information by using the association between two attribute information. For this purpose, the static information of the user is verified by using the user's location record which is dynamic information. The experiment of this paper collects the dynamic information of the actual user and extracts the static information to verify the user attributes. And we implemented the user attribute information authentication system using the proposal verification method and evaluated the utility based on applicability, convenience, and security.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.7
• /
• pp.916-920
• /
• 2013

The triploid Pacific oyster, which is produced by mating tetraploid and diploid oysters, is favored by the aquaculture industry because of its better flavor and firmer texture, particularly during the summer. However, tetraploid oyster production is not feasible in all oysters; the development of tetraploid oysters is ongoing in some oyster species. Thus, a method for ploidy verification is necessary for this endeavor, in addition to ploidy verification in aquaculture farms and in the natural environment. In this study, a method for ploidy verification of triploid and diploid oysters was developed using multiplex polymerase chain reaction (PCR) panels containing primers for molecular microsatellite markers. Two microsatellite multiplex PCR panels consisting of three markers each were developed using previously developed microsatellite markers that were optimized for performance. Both panels were able to verify the ploidy levels of 30 triploid oysters with 100% accuracy, illustrating the utility of microsatellite markers as a tool for verifying the ploidy of individual oysters.

• Transactions of Materials Processing
• /
• v.9 no.5
• /
• pp.512-525
• /
• 2000

Designers are frequently faced with multiple quality issues in injection molded parts. These issues are usually In conflict with each other, and thus tradeoff needs to be made to reach a final compromised solutions. The objective of this study is to develop an automated injection molding design methodology, whereby part defects such as warpage and weld line are optimized. The features of the proposed methodology are as follows: first, Utility Function approach is applied to transform the original multiple objective problem into single objective problem. Second is an implementation of a direct search-based Injection molding optimization procedure with automated consideration of process variation. The Space Reduction Method based on Taguchi's DOE(Design Of Experiment) is used as a general optimization tool in this study. The computational experimental verification of the methodology was partially carried out for a can model of Cavallero Plastics Incorporation, U. S. A. Applied to production, this study will be of immense value to companies in reducing the product development time and enhancing the product quality.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.761-764
• /
• 2003

Islanding phenomenon of a grid-connected photovoltaic (PV) power conditioning system (PCS) is said to occur if the PCS continues to power a section of the utility system after that section has been disconnected from the utility source. Since islanding creates hazards for personnel and equipment, PCSs are required to detect and prevent Et. In this paper, several islanding detection methods (IDMs) and reactive power variation method are described. Islanding test results for 9kW PCS are presented for verification.