• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.92-99
• /
• 2021

The ever-growing demand for enhanced competitiveness of engineered systems require designing in quality strategies that can efficiently incorporate multiple design attributes into a system. In a robust design, there must be consideration for any uncontrollable factors that should not be disregarded in the design process. Studies on multi-attribute design challenges usually assume mutual utility independence amongst the design attributes. However, mutual utility independence does not exist in every design situation. In this study, a new robust design methodology that has two utility-dependent attributes are presented. The proposed method was then compared with a traditional robust design that utilizes a wave soldering process design. The results of this case study indicate that the proposed method yields a better solution than the traditional method.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.111-120
• /
• 2012

PURPOSES : This study is to suggest suitable lighting facility installation plans by finding out driver's preference for combination of lighting facility installation among landscape factors that affect driver visibility in tunnels. METHODS : SD method is used to extract emotional factors that affect drivers' preference, Components of tunnel lighting facility installation are evaluated through conjoint analysis and it suggested relative importance of attributes and utility values. RESULTS : In the aspects of satisfaction levels of components of tunnel lighting facility installation, Tunnel side, two lows, and solid line arrangement type has the highest level of satisfaction. Extract emotional factors that affect drivers' preference are "safety", "openness" and "amenity." In addition, the result of analyzing relative importance of attributes of tunnel lighting facility shows that numbers of lighting array has the highest importance and lighting facility arrangement has the lowest importance. Result of analyzing partial utility shows that the 2 low type among number of lows, the solid line arrangement type between arrangement types, placing in the middle part among lighting facility arrangement were highly preferred. CONCLUSIONS : In the case of lighting numbers, utility values of the first line and the second line showed us a big difference. Increasing the number arrays in the future reformation of lighting facility installation combination will be effective in enhancing the utility of the driver.

• 한국식품조리과학회지
• /
• 제19권5호
• /
• pp.581-590
• /
• 2003

The purpose of this study was to identify the combinations of factors combinations conferring the highest utility of family restaurants to university students, and establish the relative importance of these factors in terms of their contribution to total utility. 196 of 200 questionnaires were utilized for the analysis. (Eds note: to whom were the questionnaires administered) Frequencies, crosstabs, and the conjoint, max. utility, BTL and Logit models, K-means cluster and one-way ANOVA analysesis, and the Friedman test were the statistical methods used for this study. The findings from this study were as follows: 1) the Pearson's R and Kendall's tau statistics (Eds note: these were not mentioned earlier) show that the model (Eds note: which model is this) fits the data well. 2) it was found that of all the respondents, especially the first and third clusters, regarded both the type of food and the price as very important factors. 3) it was found that all the respondents, especially the third cluster, most preferred a family restaurant (design and simulation) that provided less than 6 fusion and traditional foods. The first cluster most preferred family restaurant (design) that provided over 10 traditional and less than 6 ethnic foods. The second cluster most preferred a family restaurant (design and simulation) that provided over 10 traditional foods. 4) the results of the study have provided some insights into the effective types of family restaurant designs that can be successfully developed by those who manage menu variety, quality and type of food, price, and quality of service to university students dining at family restaurants.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 1999년도 제15회 하계 학술발표회 논문집
• /
• pp.245-265
• /
• 1999

MAUT and AHP are widely used for quantification of subjective judgements in various fields of decision making. This study focuses on the introduction and application of MAUT/AHP method which is a hybrid of MAUT and AHP techniques in R&D project priority setting. This hybrid model can clarify each factors' contribution using MAUT method and can reduce the number of pairwise comparisons of AHP method. This study applies AMUT/AHP method to the evaluation of R&D projects in a Government - funded research institute. To evaluate R&D projects, six evaluation factors are derived. SMART(Simple MultiAttribute Rating Technique) and DVM(Difference Value Measurement ) out of many MAUT methods are used to design the utility function ad AHP is used to allocate the weights among evaluation factors. The major findings of this study can be summarized as follows. First, the SMART/AHP and the DVM/AHP have the same results with the SMART and the DVM, and they are different results with AHP. It is very hard to decide which one is better. Second, MAUT/AHP's strength is analyzed. MAUT reflects utility values of evaluators to alternatives and AHP results objective and consistent weights of factors through pariwise comparisons. Third, its possible application fields are proposed. It is applicable to subjective decision making problems with high complexity and inter-independent factors.

• 산경연구논집
• /
• 제10권1호
• /
• pp.39-49
• /
• 2019

Purpose - Previous studies examined effects of sharing economy in the fields such as accommodation and automobile sector, while there are lack of researches in the field of skill-sharing economy. By classifying skill-sharing into general and special skill-sharing, this study explored effects of variables such as transaction utility, social utility, sustainability utility, emotional utility, economic utility, and trust utility, on attitudes, intention, satisfaction, and loyalty of demand (i.e., customers) and supply (i.e., providers) sides, potential, and actual customers. Research design, data, and methodology - Data were collected via both online and offline surveys. This study applied factor analysis and multiple regression analysis for findings. Results - Results show that utilities for general suppliers' skill-sharing are significant than other cases. Among utilities, this study found that trust utility shows significant for the cases of special customers', general suppliers' and special suppliers' potential skill-sharing. The results implies that trust is crucial in the transaction of the sharing economy. Conclusions - Enhanced managerial systems help resolve issues on the sharing economy. This study provides implications what are positive effects of skill-sharing economy and recommends proper establishment of the sharing economy.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.143-155
• /
• 2016

Recently, a massive loss of life and property is occurring in Korea due to traffic accidents, with the rapid increase in cars. For improvement of traffic safety, the Korea Transportation Safety Authority intensively analyzes accident data in local governments with low traffic safety index, performs a field investigation to extract problems and offers local governments improvements for problems, by conducting the 'Special Survey of Actual Conditions of Traffic Safety' each year, starting 2008. But local governments cannot strongly push forward the improvement projects due to the limited budget and the uncertainty of the improvement plan effects. Therefore, this study suggested a model which applied the Utility concept to the AHP theory, in order to efficiently decide a priority of the improvement plans in accident black spots in consideration of the limited budget of local governments. The number of accidents in each spot for improvement and accident severity, traffic volume, pedestrian volume, the improvement project cost and the accident reduction effect were chosen as evaluation factors for deciding a priority, and data about the improvement plan costs and the accident reduction effects, traffic accidents and traffic volume in the spots to undergo the special research on the real condition of traffic accident in the past were collected from the existing studies. Then, regression analysis was carried out and the Utility Curve of each evaluation factor was computed. Based on the AHP analysis findings, this study devised a priority decision method which calculated the weight and the utility function of each evaluation factor and compared the total utility values. The AHP analysis findings showed that among the evaluation factors, accident severity had the biggest importance and it was followed by the improvement plan cost, the number of accidents, the improvement effect, traffic volume and pedestrian volume. The calculated utility function shows a rise in utility, as the variables of the 5 evaluation factors; the number of accidents, accident severity, the improvement plan effect, traffic volume and pedestrian volume increase and a fall in utility, as the variables of the improvement plan cost increase, since the improvement plan cost is included in the budget spent by a local government.

• 한국학교보건학회지
• /
• 제3권2호
• /
• pp.88-95
• /
• 1990

In order to promote the Generalized Health Beliefs between the medical doctors and university students for more comprehensive health control, we researched the Generalized Health Beliefs invented by Dr. Cockburn and microsystemic enviromental factors. As a result, we obtained the following conclusion from the study: 1. Analytically possible answers were given by 525 students (92.6%), and among them, 356(67.8%) male students, and 196(32.2%) female students. 2. Items for Generalized Health Beliefs, Which were divided into 4 factors: 4 items for seriousness of health, 3 items for the barrier of medical utility, 4 items for the medical motivation, and 4 item for the control over illness. 3. Cronbach's alpha constant for respective analytic factors revealed that the seriousness of health; 0.92, the barrier of medical utility; 0.94, the medical motivation; 0.44, and the control over illness; 0.76. 4. The seriousness of health was influences by gender, origin of birth, residence, and frequency of visiting a doctor during one year period (<0.05). 5. The barrier of medical utility differs from origin of birth, residence, and frequency of visiting differs from origin of birth, residence, and frequency of visiting a doctor(<0.05). 6. Gender was found to be an influencing factor in the medical motivation, and gender and religion in the control over illness(<0.05).

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권4호
• /
• pp.77-84
• /
• 2017

Purpose: In terms of the flexibility in hospital architecture, there are fixed elements of hospital architecture: mechanical, electrical, aeration rooms and shafts, which are the main utility spaces. Thus, it is necessary to recognize the utility space as a system that helps internal functions and flexible internal changes. This study analyzes the notion of the main utility space in hospital architecture and the architectural planning features of the main utility spaces as the system in the design process of the recently built hospitals. Methods: The design factors are extracted comparing two hospitals' plans in each stage and the systematic characteristics of utility spaces are analyzed accordingly. The opinions gathered from interviews of practitioners, architects and facility planning experts directly involved in the architecture design process are analyzed and reflected in the results. Results: Planning for utility spaces should be accompanied by the architectural plan from the basic design process, and proceeded with recognizing utility spaces as a system, which is a fixed element. Utility spaces are highly organically connected. Horizontal and vertical distribution of air chambers can reduce the length and number of ducts, and thus save story height, and reduce the number of shafts, the vertical connection passage. This is advantageous in securing the variable area, which is the ultimate objective of the system-centered hospital architecture plan. Implications: Thereby aims to provide fundamental data on systematic utility space planning in the hospital architecture planning.

• ETRI Journal
• /
• 제40권6호
• /
• pp.813-823
• /
• 2018

In existing mobile computing environments, users need to choose between their privacy and the services that they can receive from an application. However, existing mobile platforms do not allow users to perform such trade-offs in a fine-grained manner. In this study, we investigate whether users can effectively make utility-privacy trade-offs when they are provided with a multilevel privacy control method that allows them to recognize the different quality of service that they will receive from an application by limiting the disclosure of their private information in multiple levels. We designed a research model to observe users' utility-privacy trade-offs in accordance with the privacy control methods and other factors such as the trustworthiness of an application, quality level of private information, and users' privacy preferences. We conducted a user survey with 516 participants and found that, compared with the existing binary privacy controls, both the service utility and the privacy protection levels were significantly increased when the users used the multilevel privacy control method.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.125-136
• /
• 2012

Wrinkle and fracture are two major defects frequently found in the sheet metal forming process. In this process there are more than one design attributes to optimize and several uncontrollable factors which cannot be ignored in determining the optimal values of design variables. Therefore, attempts to reduce defects through a traditional optimization technique are often led to failures. In this research, a new design method for reducing the wrinkle and fracture under uncontrollable factors is presented by using decision-making theory. To avoid the psychological difficulties in determining the scaling constants of the multi-attribute utility function by using the ordinary lottery questions, a pair-wise comparison procedure is adapted to avoid this problem. The effectiveness of the proposed method is illustrated through a robust design of sheet metal forming process of a side member of an automotive body.