• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.294-296
• /
• 2001

PSS/E offers a power flow model of UPFC in the new version. The Dynamic model was developed in a form of user-define model that is a external function, Now is a stage of verification through variety examples. Importance of this model is in the point which it is necessary for the simulation on the stability. This paper presents the Dynamic model that is defined by user. First. the theory will be discussed, and then for verification on right operation, resultes of application to KEPRI network will be showed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.1
• /
• pp.57-61
• /
• 1984

This paper deals with the selection of minimal test instruction set for microprocessor data processing test. This test method is based on a function description of the instructions which are obtained from the data given by the user's manual. Selecting procedure is done in 3 steps: 1) a test execution graphs are represented on the instructions which are grouped functionally, 2) the essential graphs, the eliminable graphs, the eliminable graphs, and the eligible graphs are built, 3) optimal test instruction set from the essential graphs and the eligible graphs is defined. In the case of INTEL 8048, 50 test instructions can be selected optimally from 8048 instruction repertories (96 instructions)

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.82-84
• /
• 2003

This paper presented a method to develop a relay model by the user-written model function of PSS/E. As for the voltage instability, although generator current limiters, transformer's tap-changers and dynamic loads have been considered as the dominant components, the protection system is also very important because it may influence the system's dynamic behaviour. Hence a distance relay model implemented with the suggested method was added, and then the operating characteristics of the distance relay under the voltage instability condition were investigated.

• Journal of Environmental Science International
• /
• v.19 no.8
• /
• pp.1057-1066
• /
• 2010

An ecological learning center is defined as a place which can establish the correct relationship between human and environment. Human can learn ecosystem and importance of environment throughout observation of nature and participation in program of ecological learning center. The most important aspects of ecological learning center planning are to reflect on user's demand and preservation of ecosystem. The prime goals of this study is to analyze user's characteristics in the Young Wheol Mulmurigol Ecological Learning Center. The second goal of this study is to find out the satisfaction model based on user's perceived performance of each program and facility in the center. For this study, questionnaire survey with 204 individuals was completed. The data from the questionnaire were analyzed statistical method by SPSS. There are several significant results from the study as following First, this ecological learning center as a newly operating facility is used not for educational purpose but for resting and relaxation purpose. It is due to that the most of users in this center are package tourists with historic scenes. Second, user's perceived performance evaluated by 23 attributions of programs and facilities, and these attributions could be classified by 5 factors such as environment friendly design, educational function, preservation of environment, provision of various bio-top and provision of resting area. Third, the user satisfaction model indicates that user satisfaction is depended on various factors such as preservation of environment, provision of various bio-top, provision of resting area. Among these factor affecting the satisfaction, provision of various bio-top is the most influence on user satisfaction.

• The Korean Journal of Archival Studies
• /
• no.37
• /
• pp.239-271
• /
• 2013

Records Management System(RMS) is a system for managing electronic records in records centers. However, RMS cannot content itself with the purpose of introduction and user demands. This is caused by lack of understanding the user's RMS and a review of the lack of detailed features. Therefore, the aim of this study reviews and evaluates a detailed accession function of RMS. Firstly, the study reviewed a detailed function of accession in RMS. Analysing the business processes that each function carried out, it defined functional requirements and investigated functional compliance as the check list which produced by the functional requirements definition. Finally, it surveyed and interviewed public records managers and analyzed the present situation of functional implementation of records accession function. Afterwards, improvement plans and implications were proposed through comparison of global-standard.

• Structural Engineering and Mechanics
• /
• v.73 no.1
• /
• pp.65-73
• /
• 2020

The present work describes a new time marching procedure for structural dynamics analyses. In this novel technique, time integration parameters are automatically evaluated according to the properties of the model. Such parameters are locally defined, allowing the user to input a numerical dissipation property for each element, which defines the amount of numerical dissipation to be introduced. Since the integration parameters are locally defined as a function of the structural element itself, the time marching technique adapts according to the model, providing enhanced accuracy. The new methodology is based on displacement-velocity relations and no computation of accelerations is required. Furthermore, the method is second order accurate, it has guaranteed stability, it is truly self-starting and it allows highly controllable algorithm dissipation in the higher modes. Numerical results are presented and compared to those provided by the Newmark and the Bathe methods, illustrating the good performance of the new time marching procedure.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2008

Modularized GPS software defined radio (SDR) has many advantages of applying and modifying algorithm. Hardware based GPS receiver uses many hardware parts (such as RF front, correlators, CPU and other peripherals) that process tracked signal and navigation data to calculate user position, while SDR uses software modules, which run on general purpose CPU platform or embedded DSP. SDR does not have to change hardware part and is not limited by hardware capability when new processing algorithm is applied. The weakness of SDR is that software correlation takes lots of processing time. However, in these days the evolution of processing power of MPU and DSP leads the competitiveness of SDR against the hardware GPS receiver. This paper shows a study of modulization of GPS software platform and it presents development of the GNSS software platform using MATLAB Simulink™. We focus on post processing SDR platform which is usually adapted in research area. The main functions of SDR are GPS signal acquisition, signal tracking, decoding navigation data and calculating stand alone user position from stored data that was down converted and sampled intermediate frequency (IF) data. Each module of SDR platform is categorized by function for applicability for applying for other frequency and GPS signal easily. The developed software platform is tested using stored data which is down-converted and sampled IF data file. The test results present that the software platform calculates user position properly.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.119-127
• /
• 2000

In this study the classified researches the artificial and natural flaws in welding parts are performed using the pattern recognition technology. For this purpose the signal pattern recognition package including the user defined function was developed and the total procedure including the digital signal processing feature extraction feature selection and classifi-er selection is teated by bulk,. Specially it is composed with and discussed using the statistical classifier such as the linear discriminant function the empirical Bayesian classifier. Also the pattern recognition technology is applied to classifica-tion problem of natural flaw(i.e multiple classification problem-crack lack of penetration lack of fusion porosity and slag inclusion the planar and volumetric flaw classification problem), According to this result it is possible to acquire the recognition rate of 83% above even through it is different a little according to domain extracting the feature and the classifier.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.1
• /
• pp.106-110
• /
• 2000

The researches classifying the artificial flaws in welding parts are performed using the pattern recognition technology. For this purpose the signal pattern recognition package including user defined function is developed and the total procedure is made up the digital signal processing, feature extraction, feature selection, classfier design. Specially it is composed with and discussed using the ststistical classfier such as the linear discriminant function classfier, the empirical Bayesian classfier.

• International journal of advanced smart convergence
• /
• v.1 no.1
• /
• pp.6-13
• /
• 2012

An improved algorithm for image quality assessment is presented. First a simple model of human visual system, consisting of a nonlinear function and a 2-D filter, processes the input images. This filter has one user-defined parameter, whose value depends on the reference image. This way the algorithm can adapt to different scenarios. In the next step the average value of locally computed correlation coefficients between the two processed images is found. This criterion is closely related to the way in which human observer assesses image quality. Finally, image quality measure is computed as the average value of locally computed correlation coefficients, adjusted by the average correlation coefficient between the reference and error images. By this approach the proposed measure differentiates between the random and signal dependant distortions, which have different effects on human observer. Performance of the proposed quality measure is illustrated by examples involving images with different types of degradation.