• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.353-358
• /
• 2017

This study aims to propose an assessment tool of port service quality (PSQ) in the context of container transport logistics (CTLs), by taking the perspectives from port users. The CTLs defined in this study are the relevant activities of serving the physical flows of a container box from a point of origin via a container port to a point of destination. To address the ports' role in collaboration between its channel members in CTLs, the PSQ measures for all port user groups (i.e. common PSQ measures) are selected based on the relevant CTLs activities involved by port, and its users within terminal/port area as well as throughout the CTLs chain. An importance-performance analysis (IPA) is applied as a diagnostic tool to analyse the status quo of Busan Port in CTLs contexts, by comparing the importance and performance (IP ) scores against each individual CTLs criterion. The findings from the IPA reveal that port managers and policy makers at the Busan Port should concentrate on six PSQ measures (i.e. SR1, SR4, ITS1, VAS1, VAS4, ICI3) to enhance PSQ in CTLs. However, four measures (i.e. ITS2, ITS3, ITS4, VAS2) are identified as a possible overkill, indicating an area of inefficiency where a remedial action of the cost-cutting decision is necessary. On the other hand, the Busan port shows an outstanding performance on four measures such as SR2, SR3, ICI1 and ICI2. The measures are not only important but also high performance. The study findings provide managerial guidance to port managers in Busan Port, in view of searching for managerial and operational strategies for sustainable port growth.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.545-550
• /
• 2018

Ministry of Oceans and Fisheries declared action plan for the electric fishing gear using real name in order to prevent overusing the fishing gear and to reduce discarded fishing gear. It is needed for a technique that can efficiently transmit the information including the type and location of the fishing gear and the user's real name to the fishing boat and the control center using IoT-based communication. The marine tracker buoy system, which is placed on the water for a long time, transmit the position data and the state data of the buoys to the control center in the ground by using NB-IoT channels. In this paper, we propose the algorithm for the low-power operation of the marine tracker buoy system is proposed and test results of current consumption in the marine tracker buoy system with the proposed algorithm is investigated.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.121-128
• /
• 2019

Medical services should be provided not only to patients but also to medical staff who are the main actors of medical treatment. This paper is based on Ethnography, observing the behavior of medical staff performing medical actions and finding what is the most frequent of physical medical treatment. In particular, I observed the need for recognition and performance of the clinical workforce for invasive medical treatment. Based on the Insight from the observation and analysis of medical staff's behavior on intravenous fluid therapy and in-depth interview, I defined four design value factors. Plus, I suggest a design prototype with a proposal for designing a medical consumable kit for intravenous fluid therapy to validate the design elements. Kitting medical consumables simplify the preparation and disposal process throughout the treatment, enabling rapid medical action and increasing work efficiency.

• The Korean Journal of Archival Studies
• /
• no.34
• /
• pp.107-163
• /
• 2012

The share of the internet has grown significantly in terms of usage and level of influence. Among the internet media, OhmyNews is considered a alternative media representing Korea's independent internet news, and a typical example displaying characteristics of the internet news. The processing step can be divided as five stage, with recorded information and applicable technical element extractable from each stage. In this thesis paper, we have analyzed domestic and overseas metadata standard examples to devise metadata design plans. Items to be focused when redesigning metadata based on domestic and foreign case studies are as follows: First, user access should be convenient; second, connection with related information should be considered; third, accumulation of production, management, usage, storage, and action history should be considered; and fourth, the design should allow higher utilization of contents. In depth researches over internet media are already being carried out in external academic disciplines including the media information studies, information and communication studies, and communications studies. We expect that it will also be necessary to consider such researches over the internet media for mass media record management research going forward.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.30 no.1
• /
• pp.53-75
• /
• 2019

This study has examined the policy status of the specialized libraries and analyzed the status of curation services of libraries and similar institutions and portals, and proposed policy directions for the curation services provision of the specialized libraries. As for the results of this study, first, curation information is collected and selected through the participation of various curators, and the curation information is regularly updated on the websites and online gateways toward maximizing the perception of the book collections in place and the use of collections. Second, the scope of the specialized libraries' curation services are diversified, such as research support services, one-on-one customized curation services, and book curation. Third, digital curation services are constructed in connection with specialized themes. Fourth, beacon is installed inside, and based on the information received from the information forwarding media, individualized user services are provided via such data as the scope of movement of the users and the time entailed for dwelling in a space.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.7-13
• /
• 2021

In this paper, the function of starting the negative voltage used in the IT equipment when it is generated and the method of controlling it using a microcontroller for the function to detect the overload and respond to it are presented. To do this, the limitations of the existing negative voltage generation circuit and the problems that occur during overload were analyzed, and a circuit that detects and controls the overload condition without a separate current sensing circuit was presented. In order to confirm the effect of the proposed method, an experiment was conducted by configuring an experimental circuit. As a result of the experiment, compared to the existing negative voltage generation circuit, which falls into a latch-up state when overloaded and enters a dangerous state, the proposed circuit detects this, stop the operation of the circuit, and informs the user of such an abnormal state to take action. have. In addition, since the starting point of the circuit is determined according to the system state, the experimental result was confirmed that the starting time was significantly shortened by about 23% compared to the time switch method.

• Geomechanics and Engineering
• /
• v.31 no.5
• /
• pp.505-518
• /
• 2022

This study introduces soil resistance multipliers at locations encompassed by the zone of influence of the helix plate to consider the added lateral resistance provided to the helical pile. The zone of influence of a helix plate is a function of its diameter and serves as a boundary condition for the modified soil resistance springs. The concept is based on implementing p-multipliers as a reduction factor for piles in group action. The application of modified p-y springs in the analysis of helical piles allows for better characterization and understanding of the lateral behavior of helical piles, which will help further the development of design methods. To execute the proposed method, a finite difference program, HPCap (Helical Pile Capacity), was developed by the authors using Matlab. The program computes the deflection, shear force, bending moment, and soil resistance of the helical pile and allows the user to freely input the value of the zone of influence and Ω (a coefficient that affects the value of the p-multiplier). Results from ten full-scale lateral load tests on helical piles embedded at depths of 3.0 m with varying shaft diameters, shaft thicknesses, and helix configurations were analyzed to determine the zone of influence and the magnitude of the p-multipliers. The analysis determined that the value of the p-multipliers is influenced by the ratio between the pile embedment length and the shaft diameter (D_p), the effective helix diameter (D_h-D_p), and the zone of influence. Furthermore, the zone of influence is recommended to be 1.75 times the helix diameter (D_h). Using the numerical analysis method presented in this study, the predicted deflections of the various helical pile cases showed good agreement with the observed field test results.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.393-399
• /
• 2023

Upper limb amputees wear an upper limb prosthesis for both aesthetic purposes and functional necessity, and in particular, in the case of amputee with both hands, it is essential to wear a myoelectric prosthetic hand capable of gripping action. The prosthetic hand operated by the EMG signal of the remaining muscles is a public insurance benefit item of the Industrial Accident Compensation Insurance, and test method standards are needed to be developed for the safety of the user and the effectiveness of the product performance. In this study, we developed systems for measuring the gripping force of myoelectric hand prosthesis by a load cell and for durability test of the prosthesis over repeated use with a proximity sensor, and propose a test method standard. Since the international test method standard has not yet been established, it is expected that Korea will be able to play a leading role in this standardization field in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.591-596
• /
• 2023

This study developed a program that can produce videos easily and conveniently, focusing on teenage media producers. Through user research, we identified the needs and problems of teenage producers, and implemented a character customization function desired by users and an emotion and action recommendation system using GPT. In the rendering process, the final image was created by combining audio and video using OpenCV and FFmpeg. Teenage users who do not have expertise in video production can customize web drama characters through a simple interface and receive recommendations for emotions and actions with the help of GPT. The program of this study is expected to be a tool that can help teenage users who do not have expertise in editing and directing to produce high-quality videos, lower the entry barrier to video production, and contribute to the development of the one-person media industry. do. In the future, we plan to provide a video production environment considering mobile or vertical resolution versions.

• International Journal of Computer Science & Network Security
• /
• v.24 no.6
• /
• pp.161-170
• /
• 2024

With the technological advances, the humans have made so much progress in the ease of living and now incorporating the use of sight, motion, sound, speech etc. for various application and software controls. In this paper, we have explored the project in which gestures plays a very significant role in the project. The topic of gesture control which has been researched a lot and is just getting evolved every day. We see the usage of computer vision in this project. The main objective that we achieved in this project is controlling the computer settings with hand gestures using computer vision. In this project we are creating a module which acts a volume controlling program in which we use hand gestures to control the computer system volume. We have included the use of OpenCV. This module is used in the implementation of hand gestures in computer controls. The module in execution uses the web camera of the computer to record the images or videos and then processes them to find the needed information and then based on the input, performs the action on the volume settings if that computer. The program has the functionality of increasing and decreasing the volume of the computer. The setup needed for the program execution is a web camera to record the input images and videos which will be given by the user. The program will perform gesture recognition with the help of OpenCV and python and its libraries and them it will recognize or identify the specified human gestures and use them to perform or carry out the changes in the device setting. The objective is to adjust the volume of a computer device without the need for physical interaction using a mouse or keyboard. OpenCV, a widely utilized tool for image processing and computer vision applications in this domain, enjoys extensive popularity. The OpenCV community consists of over 47,000 individuals, and as of a survey conducted in 2020, the estimated number of downloads exceeds 18 million.