• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.1148-1159
• /
• 2014

Different procedures for estimation of the extreme global wave hydroelastic responses in ships are discussed. Firstly, stochastic procedures for application in detailed numerical studies (CFD) are outlined. The use of the First Order Reliability Method (FORM) to generate critical wave episodes of short duration, less than 1 minute, with prescribed probability content is discussed for use in extreme response predictions including hydroelastic behaviour and slamming load events. The possibility of combining FORM results with Monte Carlo simulations is discussed for faster but still very accurate estimation of extreme responses. Secondly, stochastic procedures using measured time series of responses as input are considered. The Peak-over-Threshold procedure and the Weibull fitting are applied and discussed for the extreme value predictions including possible corrections for clustering effects.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.10
• /
• pp.719-726
• /
• 2010

In this paper, the appropriate thermal storage time of an air-conditioning system with slab thermal storage was considered by use of summer measurement values. Two standards of heat extraction rate and criterion function were established as the standard that evaluates appropriateness. When heat extraction rate was a standard, zero hour and seven hours were obtained as appropriate thermal storage time, in the case of evaluation by energy consumption and running cost individually. Also, when criterion function was a standard, the difference between energy consumption and running cost was small, it was because the weight function to room air temperature deviation was much bigger than heat extraction rate.

• CDE review
• /
• v.21 no.2
• /
• pp.31-33
• /
• 2015

This paper deals with synthesis of 4 bar linkage by using optimum design. To design 4 bar linkage, overlay method is proposed and for optimization, genetic algorithm is applied with objective function. The accuracy of this method will be determined by errors between real value and test value. We will use Chebychev spacing to get 3 precision positions of input angles. The output angles will be determined by the function that the designer wants input and output relations to be. It will be applied to example to show the accuracy of this method. The advantages of using this method are that it is fast to get optimal solution and it is simple to use.

• Journal of Sasang Constitutional Medicine
• /
• v.21 no.2
• /
• pp.153-162
• /
• 2009

1. Objectives : The purpose of this rase study is to evaluate the superiority of Sasang constitutional diagnosis and treatment in skin disease compared with western medicine and is to notify the importance of elevating requsite qi(保命之主) in treatment of skin disease. 2. Method : We compared to remedical value in two case. One is to use herbal medicine as well as routine antibiotic treatment. The other one is to use only herbal medicine. Antibiotics was focused on attacking the pathogen and herbal medicine was focused on elevating requsite qi(保命之主). 3. Result and conclusions : In result, the one using only herbal medicine showed satisfactory progress and predominant remedical value compared with one using herbal medicine and routine antibiotic. So It is necessary to approach skin disease in view of elevating requsite qi(保命之主).

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.3
• /
• pp.184-192
• /
• 2001

In this paper we present a remeshing algorithm for irregular meshes with boundaries. The irregular meshes are approximated by regular meshes where the topological regularity is essential for the multiresolutional analysis of the given meshes. Normal meshes are utilized to reduce the necessary data size at each resolution level of the regularized meshes. The normal mesh uses one scalar value, i.e., normal offset value which is based on the regular rule of a uniform subdivision, while other remeshing schemes use one 3D vector at each vertex. Since the normal offset cannot be properly used for the boundaries of meshes, we use a combined subdivision scheme which resolves a problem of the proposed normal offset method at the boundaries. Finally, we show an example to see the effectiveness of the proposed scheme to reduce the data size of a mesh model.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.809-814
• /
• 1998

Recently many cases that using strengthening method with a steel plate or carbon-fiber sheet in a construction field are increasing. In this reason, it is demanded that developing a plan of preventing delamination of strengthening material. So in this research, for the case of strengthening method of steel plate, it is made use of notch and anchor bolt and for the case of carbon fiber sheet, it is made use of notch, anchor bolt, line anchor and shear strengthening. After all the cases were applied, we made 15 specimen beams. The beams was measured and analyzed about the behavior property of strengthened beams, the ability strengthening method, the relation between load and the shape of failure, the crack load, the yield load, the shape of crack pattern, the increasing rate from yield load and maximum load and the strain of rebar. All the strengthening methods results in almost same value until the yield load, and it wasn't quite different from the theoretical value. But for the case of increasing rate from the yield load and maximum load, comparing with the existing method, the new strengthening methods are proved to be profitable about the safety.

• Journal of Integrative Natural Science
• /
• v.9 no.3
• /
• pp.215-222
• /
• 2016

When the linear correlation of the quality variables are considerably high, multivariate control charts may be a more effective way than univariate charts which operate quality variables and process parameters individually. Performances and efficiencies of the multivariate control charts under multivariate normal process has been considered. Some numerical results are presented under small scale of the shifts in the process to see the improvement of the efficiency of EWMA chart and CUSUM chart, which use past quality information, comparing to Shewart chart, which do not use quality information. We can know that the decision of the optimum value of the smoothing constant in EWMA structure or the reference value in CUSUM structure are very important whether we adopt combine-accumulate technique or accumulate-combine technique under the given condition of process.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.32-33
• /
• 2017

In order to improve the flow performance of high performance concrete, use of high performance water reducing agent and low viscosity type water reducing agent is a study of suitable range of use due to side effects. in this study, we aimed at reducing viscosity and yield value using high performance water reducing agent and low viscosity type water reducing agent, and this was evaluated using a rheometer. as a result of analysis of viscosity and yield value, it was found that the high performance water reducing agent has higher reduction effect than the low viscosity type water reducing agent. however, the larger the viscosity lowering effect is, the lower the usable range is, compared to general high performance water reducing agents, and it was found that sufficient consideration for this judgment of appropriate quantity is necessary.

• Environmental and Resource Economics Review
• /
• v.14 no.1
• /
• pp.25-50
• /
• 2005

This study estimates the willingness-to-pay (WTP) for avoiding the destruction of a first-grade ecological area by means of contingent valuation method. Specifically, we employ the dichotomous choice technique along with the follow-up questionnaires. Our analysis implies the yearly WTP per household for avoiding the destruction of the ecological area of 100,000 pyongs is 8,898 won with the 95% confidence interval of 6,611~11,976 won. We estimate the asset value of that area to be 1,707 billion won with the 95% confidence interval of 1,269 to 2,298 billion won. We also decompose the total value of the area into the value of direct (22%) and indirect (38.8%) use, the option value (19.9%) and the conservation value (21.3%). Although using these data for SEEA (the system of integrated environmental economic accounting) is bound by certain restrictions, one could employ our empirical findings as advisory information for decision making in the process of prior environmental review or for assessing the environmental impact.

• Korean Journal of Organic Agriculture
• /
• v.21 no.2
• /
• pp.271-282
• /
• 2013

This experiments was conducted to investigate the influence on organic rice cultivation by continuous use of cow manure in the central region of Korea and investigated productivity of organic rice and feed value, stock carrying capacity of organic rice straw. In the results, application of chemical fertilizer showed higher one of 1st and 2nd year in fresh matter yield (15.77, 30.30ton/ha), dry matter yield (9.90, 13.89 ton/ha), dry matter yield of rice straw (4.88, 7.15ton/ha), dry matter weight of kernel per plant (29.81, 39.99g) and number of kernel per plant (1212.58, 1701units), but there were not significantly differences with each experimental plots in 3rd year. And harvest index showed higher one in application of chemical fertilizer (0.52, 0.48, 0.43) until 3 years. But their quantitative difference between application of chemical fertilizer and cow manure was gradually decreased each year. And the average value of $K_{CP}$ and $K_{TDN}$ showed higher one in application of chemical fertilizer (2.01, 2.94, 1.95 head/ha/yr) until 3 years. However, quantitative difference between chemical fertilizer and cow manure was gradually decreased each year. Especially, application of cow manure showed higher value of 3rd year in $K_{ME}$, but there was not significantly difference with each experimental plots. According to the results, continuous use of cow manure will be reduced their quantitative differences between chemical fertilizer as the year progress in the central region of Korea in terms of productivity of organic rice and feed value, stock carrying capacity of organic rice straw.