• Advances in materials Research
• /
• v.11 no.2
• /
• pp.121-146
• /
• 2022

In the recent years, the use of agricultural waste in green cement mortar and concrete production has attracted considerable attention because of potential saving in the large areas of landfills and potential enhancement on the performance of mortar. In this research, microparticles of palm oil fuel ash (POFA) obtained from a multistage thermal and mechanical treatment processes of raw POFA originating from palm oil mill was utilized as a pozzolanic material to produce high-performance cement mortar (HPCM). POFA was used as a partial replacement material to ordinary Portland cement (OPC) at replacement levels of 0, 5, 10, 15, 20, 25, 30, 35, 40% by volume. Sand with particle size smaller than 300 ㎛ was used to enhance the performance of the HPCM. The HPCM mixes were tested for workability, compressive strength, ultrasonic pulse velocity (UPV), porosity and absorption. The results portray that the incorporation of micro POFA in HPCMs led to a slight reduction in the compressive strength. At 40% replacement level, the compressive strength was 87.4 MPa at 28 days which is suitable for many high strength applications. Although adding POFA to the cement mixtures harmed the absorption and porosity, those properties were very low at 3.4% and 11.5% respectively at a 40% POFA replacement ratio and after 28 days of curing. The HPCM mixtures containing POFA exhibited greater increase in strength and UPV as well as greater reduction in absorption and porosity than the control OPC mortar from 7 to 28 days of curing age, as a result of the pozzolanic reaction of POFA. Micro POFA with finely graded sand resulted in a dense and high strength cement mortar due to the pozzolanic reaction and increased packing effect. Therefore, it is demonstrated that the POFA could be used with high replacement ratios as a pozzolanic material to produce HPCM.

• Steel and Composite Structures
• /
• v.47 no.5
• /
• pp.551-568
• /
• 2023

In this research, a new two-dimensional (2D) and quasi three-dimensional (quasi-3D) higher order shear deformation theory is devised to address the bending problem of functionally graded plates resting on an elastic foundation. The displacement field of the suggested theories takes into account a parabolic transverse shear deformation shape function and satisfies shear stress free boundary conditions on the plate surfaces. It is expressed as a combination of trigonometric and exponential shear shape functions. The Pasternak mathematical model is considered for the elastic foundation. The material properties vary constantly across the FG plate thickness using different distributions as power-law, exponential and Mori-Tanaka model. By using the virtual works principle and Navier's technique, the governing equations of FG plates exposed to sinusoidal and evenly distributed loads are developed. The effects of material composition, geometrical parameters, stretching effect and foundation parameters on deflection, axial displacements and stresses are discussed in detail in this work. The obtained results are compared with those reported in earlier works to show the precision and simplicity of the current formulations. A very good agreement is found between the predicted results and the available solutions of other higher order theories. Future mechanical analyses of three-dimensionally FG plate structures can use the study's findings as benchmarks.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2A
• /
• pp.113-120
• /
• 2010

The use of Concrete filled circular hollow steel section (CFCHS) members in bridge design is a relatively new concept. The most important part of the design and durability of such structures is the design and the construction of the joints. In the design of recently constructed steel-concrete composite bridges using CFCHS truss girders for the main load carrying structure, the fatigue verification of the tubular spatial truss joints was a main issue. Welded CFCHS joints are very sensitive to fatigue because the geometric discontinuities of the welds lead to a high stress concentration. New research done on the fatigue behaviour of such joints has focused on CFCHS N-joints, directly welded, with finite element analysis method. A commercial software, ABAQUS, is adopted to perform the finite element analysis on the N-joints. This paper is main focused on these topics, including hot spot stress.

• Food Science of Animal Resources
• /
• v.42 no.2
• /
• pp.210-224
• /
• 2022

The use of skim milk is a strategy to increase goat milk yogurt acceptability. However, it can negatively affect yogurt rheology because fat plays a vital role in dairy structural integrity. Thus, this study aimed to investigate the effects of fat replacers on the rheological, physical, and sensory parameters of low-fat cupuassu goat milk yogurts during refrigerated storage (28 days). Five goat milk yogurts formulations were carried out: whole yogurt (WY), skim yogurt (SY), skim yogurt with inulin (SIY), skim yogurt with maltodextrin (SMY), and skim yogurt with whey protein (SWY). Treatments were subjected to bacterial counts, chemical composition, pH, water holding capacity, instrumental color and texture, rheological and sensory analyses. All samples showed reducing pH values, water holding capacity, and L^* and b^* value during storage. Regarding texture, the firmness and consistency decreased during storage. On the other hand, the viscosity index significantly increased during refrigerated storage time. Moreover, all treatments exhibited viscoelastic behaviour. In addition, SIY and SMY showed the highest apparent viscosity. Furthermore, SIY, SMY, and SWY formulations exhibited positive sensory scores for appearance, color, aroma, texture, and viscosity. However, the overall acceptability and purchase intention did not differ statistically between WY and the fat-replacement treatments (SIY, SMY, and SWY). These results indicate that fat substitutes improved the quality of skimmed formulations. Thus, inulin and maltodextrin have the potential as functional fat replaces to produce low-fat goat milk yogurts.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.15 no.1
• /
• pp.25-43
• /
• 2013

Tasmania with its clean air, isolated from mainland Australia, has been producing high-quality agricultural products and has been continually developing organic farming since 1946 when the Living Soil Association of Tasmania(LSAT) was established. The organic farming movement in Tasmania has been actively advocated through three steps: the philosophical embryonic period, the movement diffusion period and the industrialised development period. The campaigns for informing about the connection between healthy soil and life unfolded during the embryonic period. This was followed by the birth of publicity of organic farming and the certification system through the dissemination of organic farming techniques and various events related to agriculture in the diffusion period when the Organic Gardening and Farming Society(OGFS) was established in 1972. In the industrialised development period, The Organic Coalition of Tasmania (OCT) which is representative of Tasmania was organised in 2000 and has been leading the organic farming industry. The organic farming movement in Tasmania not only limits the use of artificial agricultural chemical but pursues the quality of food, environment, the health of life including all animals and plants, the issue of development in rural society, social justice, and equity in understanding. It is far more holistic in its philosophy. The output of organic food accounts for 1 % of the total amount of agricultural production and 150 certified organic farms have managed with 5,000ha of land in 2010. The supply channels for organic foods vary from farmer's market, specialty stores, supermarket chains, local store to the cooperative community. Also the consumers' behaviour for organic foods has been establishing as an alternative life style. The education of the value and role of organic farming on the environment should be enlarged for the consumption of the organic food. In addition, organising for small farmers who act individually and the link with differentiated local food have still remained issues.

• Korean Journal of Agricultural Science
• /
• v.13 no.2
• /
• pp.219-226
• /
• 1986

A study was conducted to provide direct comparisons of the effect of variations in herbage use, grazing and social behaviour upon the flat, slope and forest grassland with a total 30 Korean Native Cattle and 5 Korean Native Goats under 4-year old grassland established by intensive sowing method in Daecheon. The results obtained are summarized as follows; 1. Relative intake index, dry matter intake per animal and dry matter digestibility by Korean Native Goats in flat, slope and forest grassland were 35.2%-462g-63.7%, 35.0%-459g-63.0% and 29.8%-391g-62.1%, respectively. 2. Grazing time by Korean Native Cattle was not different among the grassland types, but ruminating time was increased in slope grassland, whereas in forest grassland was decreased. Resting time was increased in forest grassland, whereas in slope grassland was decreased. Walking time was increased in flat grassland, but loafing time was increased in forest grassland. The number of rumination, chews per bolus and defecation number were decreased in forest grassland. The number of drinks, total drinking water and walking distance were increased in slope grassland. 3. Animal distance, occupied area per animal and sub group formation by Korean Native Cattle in flat, slope and forest grassland were $3.4m-11.9m^2-3.6head$, $3.56m-11.0m^2-3.7head$ and $3.70m-14.6m^2-3.4head$, respectively. The order of grazing movement was similar to the pear-shaped grazing formation, but the relations of dominance between first grazer and last grazer upon different grassland types was not clear.

• Journal of the Korean Society of School Health
• /
• v.21 no.2
• /
• pp.119-134
• /
• 2008

Purpose: The purpose of this study is to understand a variety of intervention studies to prevent smoking by adolescents in U.S. and find out implications for Korea. Methods: This study reviewed articles found in the internet and analysed the data of US DHHS and CDC. Results: The School Health Policies and Programs Study (SHPPS) is a national survey periodically conducted to assess school health policies and programs of U.S. The main components of SHPPS are health education and physical education, health services, mental health and social services, school policies, and school environments. The CDC guidelines for school health programs to prevent tobacco use and addiction are composed of policy, instruction, curriculum, training, family involvement, tobacco-use cessation efforts, and evaluation. School-based interventions to prevent smoking can be classified into the categories of information-giving curricula, social competence curricula, social influence approaches, combined methods draw on social competence and social influence approaches and multi-modal programmes and Youth Empowerment study. The key programs for adolescent smoking prevention are ALERT Project, HSPP, TNT Project, MPP, NC YES. Conclusions: As smoking is often the first step of unhealthy behaviour such as alcohol drinking, illegal drugs, and violence, smoking prevention programmes for adolescents in U.S. have been comprehensive school-based health programs. In smoking prevention programs for adolescents, CDC plays a critical role by supporting survey, research, policy, and funds. The effectiveness of the programs was high when it was based on school and involved parents, community, and mass media. As the effect of each programme is not expected to last for a long time, consistent repetition of these interventions is essential. Current smoking prevention programs for adolescents are exploring the empowerment approach focused on the active involvement of participants rather than traditional approaches using order and discipline.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.517-526
• /
• 2005

In Korea, the methods of estimating groundwater recharge can categorized into two groups. One is baseflow separation method by means of groundurater recession curve, the other is water level fluctuation method by using the data from groundwater monitoring wells. Baseflow separation method is based on annual recharge and lumped concept, and water-table fluctuation method is largely dependent on monitoring wells rather than water budget in watershed. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, these methods have various limits to deal with these characteristics. For this purpose, the method of estimating daily recharge rate with spatial variability based on distributed rainfall-runoff model is suggested in this study. Instead of representative recharge rate of large watershed, the subdivided recharge rate with heterogeneous characteristics can be computed in daily base. The estimated daily recharge rate is an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers. Therefore, the newly suggested method could be expected to enhance existing methods.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.54 no.4
• /
• pp.39-46
• /
• 2017

Jack-up drilling rigs are widely used in offshore oil and gas exploration industry. It is originally designed for use in the shallow waters less than 60m of water depth; there is growing demand for their use in deeper water depth over 150m and harsher environmental conditions. In this study, global in-place analysis of jack-up rig leg for North-sea oil well is performed through numerical analysis. Firstly, environmental conditions and seabed characteristics at the North-sea are collected and investigated measurements from survey report. Based on these data, design specifications are established and the overall basic design is performed. Dynamic characteristics of the jack-up rig for North-sea are considered in the global in-place analysis both leg and hull and the basic stability against overturning moment is also analyzed. The structural integrity of the jack-up rig leg/hull is verified through the code checks and the adequate safety margin is observed. The uncertainty in jack-up behaviour is greatly influenced by the uncertainties in the soil characteristics that determine the resistance of the foundation to the forces imposed by the jack-up structure. Among the risks above mentioned, the punch-through during pre-loading is the most frequently encountered foundation problem for jack-up rigs. The objective of this paper is to clarify the detailed structure and installation engineering matters for prove the structural safety of jack-up rigs during operation. With this intention the following items are addressed; - Characteristics of structural behavior considering soil effect against environmental loads - Modes of failure and related pre-loading procedure and parameters - Typical results of structural engineering and verification by actual measurement.

• Korea Journal of Hospital Management
• /
• v.15 no.2
• /
• pp.27-43
• /
• 2010

The present study was conducted to assess relative importance of hospital attributes considered by patients with spinal diseases in choosing specialty or general hospitals. A total of 230 patients hospitalized with spinal diseases in sampled study sites, including 2 specialty and 2 general hospitals, participated in a self-administered questionnaire survey from April 26 through May 8 2007. Patients were asked to rate the degree of agreement on each of the 15 attributes on a 5-point Likert-type scale (1 : strongly disagree, 5 : strongly agree) for which they chose the hospital because of that specific attribute. Based on a Factor analysis, the attributes were grouped into 4 : facility and environment, accessibility, interpersonal factor, and credibility. Both patient groups from specialty (mean scale score ; 3.75) and general hospitals (3.62) commonly considered 'credibility' to be the most important attribute, followed by 'facility and environment (3.05 and 3.21).' Logistic regression analysis showed that men(Odds ratio(OR)=0.333) and those with monthly income of $\geq$ 4 million won (OR=0.298) were less likely to choose specialty hospitals. Age groups of 30 to 39 years old (OR=5.140) and $\geq$ 60 years old(OR=4.761), and professionals (OR=5.207) tended to choose specialty hospitals. Patients expressing more importance on 'facility and environment' attribute were less likely to use specialty hospitals (OR=0.571), whereas those emphasizing 'accessibility' were more likely to use specialty hospitals(OR=1.487). The findings of significant difference in patient's demographic characteristics and consideration in hospital attributes would contribute to have a better understanding on patient's choice behaviour and to develop strategy to improve patient's satisfaction.