• Journal of Life Science
• /
• 제17권4호
• /
• pp.515-521
• /
• 2007

Aprotinin, a serine protease inhibitor, has been used to ameliorate the inevitable consequences, including blood component injury after cardiac surgery with cardiopulmonary bypass (CPB). However, there are many arguments on its dosage or usage. We assessed whether administration of low dose of aprotinin in only priming solution has any beneficial effect or reduces its side effects on cardiac surgery. Thirty patients scheduled for elective cardiac surgery were randomly assigned to aprotinin group (n=15) which received aprotinin in priming solution (two million kallikrein inhibitory unit, KIU) and added one million KIU at 1 hour after the beginning of CPB or control group (n=15) which did not receive it. Hematological and biochemical variables, cytokines and cardiac marker levels, and postoperative outcomes were compared between two groups at before, during or after operation. Platelet count in aprotinin group was higher than that of control group at postoperative 24 hr. Activated partial thromboplastin time in aprotinin group was longer than that of control group at intensive care unit (ICU). Troponin-I level and postoperative blood loss volumes in aprotinin group were lower than those of control group at ICU. There were no significant differences between the two groups on the others. These results showed that low dosage of only priming solution during cardiac surgery with CPB reduced platelet destruction and postoperative bleeding, and attenuates myocardial damage. However, further studies need to be carried out with more population or pediatric patients for evaluating various aprotinin usage.

• Journal of the Korean Solar Energy Society
• /
• 제26권2호
• /
• pp.69-77
• /
• 2006

Photovoltaic is an attractive technology to remote power applications, because of its reliability, low maintenance, and zero fuel requirements. In this paper represents residential PV system based on BESS(battery energy storage system) for managing the electric power, a pattern of daily operation considering the load characteristics of the house, the generation characteristics of PV power, and utility power leveling. For apply to control algorithm, we consider the load on monthly power consumption trend and daily usage pattern. As for the control of the proposed system, to increase the conversion efficiency of the PV power, bidirectional converter is used for MPPT and SPWM inverter. An experimental system is implemented, and some experimental results are provided to demonstrate the effectiveness of the proposed system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.762-777
• /
• 2014

With the increasing usage of cloud applications such as MapReduce and social networking, the amount of data traffic in data center networks continues to grow. Moreover, these appli-cations follow the incast traffic pattern, where a large burst of traffic sent by a number of senders, accumulates simultaneously at the shallow-buffered data center switches. This causes severe packet losses. The currently deployed TCP is custom-tailored for the wide-area Internet. This causes cloud applications to suffer long completion times towing to the packet losses, and hence, results in a poor quality of service. An Explicit Congestion Notification (ECN)-based approach is an attractive solution that conservatively adjusts to the network congestion in advance. This legacy approach, however, lacks scalability in terms of the number of flows. In this paper, we reveal the primary cause of the scalability issue through analysis, and propose a new congestion-control algorithm called FaST. FaST employs a novel, virtual congestion window to conduct fine-grained congestion control that results in improved scalability. Fur-thermore, FaST is easy to deploy since it requires only a few software modifications at the server-side. Through ns-3 simulations, we show that FaST improves the scalability of data center networks compared with the existing approaches.

• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.101-110
• /
• 2003

This paper introduces an identification method for nonlinear models in the form of rule-based Fuzzy-Neural Networks (FNN). In this study, the development of the rule-based fuzzy neural networks focuses on the technologies of Computational Intelligence (CI), namely fuzzy sets, neural networks, and genetic algorithms. The FNN modeling and identification environment realizes parameter identification through synergistic usage of clustering techniques, genetic optimization and a complex search method. We use a HCM (Hard C-Means) clustering algorithm to determine initial apexes of the membership functions of the information granules used in this fuzzy model. The parameters such as apexes of membership functions, learning rates, and momentum coefficients are then adjusted using the identification algorithm of a GA hybrid scheme. The proposed GA hybrid scheme effectively combines the GA with the improved com-plex method to guarantee both global optimization and local convergence. An aggregate objective function (performance index) with a weighting factor is introduced to achieve a sound balance between approximation and generalization of the model. According to the selection and adjustment of the weighting factor of this objective function, we reveal how to design a model having sound approximation and generalization abilities. The proposed model is experimented with using several time series data (gas furnace, sewage treatment process, and NOx emission process data from gas turbine power plants).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권6호
• /
• pp.2848-2869
• /
• 2017

Mobile Wireless Sensor Networks (MWSN) are usually constrained in energy supply, which makes energy efficiency a key factor to extend the network lifetime. The management of the network topology has been widely used as a mechanism to enhance the lifetime of wireless sensor networks (WSN), and this work presents an alternative to this. Software Defined Networking (SDN) is a well-known technology in data center applications that separates the data and control planes during the network management. This paper proposes a solution based on SDN that optimizes the energy use in MWSN. The network intelligence is placed in a controller that can be accessed through different controller gateways within a MWSN. This network intelligence runs a Topology Control (TC) mechanism to build a backbone of coordinator nodes. Therefore, nodes only need to perform forwarding tasks, they reduce message retransmissions and CPU usage. This results in an improvement of the network lifetime. The performance of the proposed solution is evaluated and compared with a distributed approach using the OMNeT++ simulation framework. Results show that the network lifetime increases when 2 or more controller gateways are used.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제39B권11호
• /
• pp.771-778
• /
• 2014

We propose Femto-cell power control scheme in HeNet with Game Theory. The Femto-cell which provide high quality with low power is issued by many benefits, however there is a bunch of interferences when many Femto-cells use overlapped bandwidth with Macro-cell. We defined base station of cellular networks and mobile users as players of Game Theory, and configured interference effect among each other as power utility function. Futhermore, we showed enhanced overall system performance, lower power usage and interference decrease by using optimal power.

• Journal of the Korean Society of Physical Medicine
• /
• 제4권3호
• /
• pp.183-192
• /
• 2009

Purpose：This study was conducted to investigate whether modified CIMT with Kinesio-Taping on paretic upper limb effects upper limb function in stroke patients in comparison to those receiving only modified CIMT. Methods：20 out-patients with hemiplegia were randomly assigned to either an experimental or a control group. Both groups received modified CIMT during a 10-week period. Additionally, an experimental group received modified CIMT with Kinesio-Taping on paretic upper limb and trunk. Results：In Manual function test, Grip strength, Jebsen-Taylor hand function test, MAL(Motor Activity Log) and Functional independence measure (FIM) were significantly different at all intervals of the study period(0, 3, 6, 10-week) in the experimental and control groups(p<.05). Exceptionally there was no significant difference in Jebsen-Taylor hand function test between the experimental and control groups. Conclusion：These results suggest that modified CIMT with Kinesio-taping improve the upper limb function. And also increase usage of affected upper limb and assist in daily living activity more than only modified CIMT.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제3권1호
• /
• pp.29-34
• /
• 1974

1) It was found that melons stored at $20^{\circ}C$ were deteriorated mainly by phytophthora spot and the limits for commercial purpose were 6 days for the control and 4 days for the film packed sample. First of all, alternaria rot was produced after 8 days in control group and each group had cold-stroage hindrance after 20 days. The limits for commercial purpose determined by general appearance were 14 days for the control, 18 days for the 0.02mm and 16 days for the 0.04 mm group. 2) Seven to 8% of weight decrease was the limit of commercial purpose by general appearance. The amount of $CO_2$ excretion was decreased in $20^{\circ}C$ group and increased drastically with deterioration. The amount of $CO_2$, excretion during storage at $2^{\circ}C$ was about $\frac{1}{5}\;to\;\frac{1}{6}\;of\;20^{\circ}C$ 3) The usage of sugar for the substrate of respiration during storage was small and large amount of acids was used for this purpose. The sugar content was decreased with deterioration but acids were increased. The reducing sugar content was decreased and non-reducing sugar content was increased during storage.

• Journal of Korean Society for Quality Management
• /
• 제36권3호
• /
• pp.22-33
• /
• 2008

In this paper, first of all, the driving performance of QCCs(Quality Control Circles) that are stagnant during 10 years are reviewed. And the usage realities and utilization degree of quality improvement tools in the domestic activities of QCCs are empirically analyzed into size of company and type of business. Thus, this empirical study compares the results of past period in 1997${\sim}$1999 with the results of 6 sigma non-adapting period in 2000${\sim}$2003 through examining the collections of presentation for Korea Quality Control Circle Meetings. Also, according to the introduction of 6 sigma in QCCs activities the difference of utilization degree for quality improvement tools are analyzed to compare the results of 6 sigma non-adapting period in 2000${\sim}$2003 with the results of 6 sigma adapting period in 2004${\sim}$2006. Finally, the utilization degree of 6 sigma tools which follow the driving steps of 6 sigma, DMAIC, are analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제63권7호
• /
• pp.987-993
• /
• 2014

Pitching machines have been around for many years for casual amusement purpose or professional athletes' training usage, and so forth. The current pitching machines are usually built on the firm ground and do not have any mobility function. In this paper, we develop a pitching machine that has both ball-shooting and mobility functions. Our developed pitching machine consists of two parts. The upper body part has a function of shooting a ball using two DC motors and the lower body part has a function of mobility like mobile robots by using two wheels governed by DC motors. All these functions are operated wirelessly by Android smartphones via bluetooth. The control of each DC motor is done by ${\epsilon}$-PID control method in which the gain tuning is simplied by using a single parameter ${\epsilon}$. Simulation and actual experiment show that our developed pitching machine has both nontrivial shooting and mobility features.