• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.141-155
• /
• 2017

In the present paper, we investigated the development status of precipitated calcium carbonate (PCC) production using steel slag, which is one of mineral carbonation (MC) technologies, from the standpoint of $CO_2$ utilization. Principle, feature, and global and domestic development status of the mineral carbonation technology were discussed together with the overview of the production method and market of PCC. Mineral carbonation is known as stable and environmentally-friendly technology enabling economical treatment of industrials wastes. Typically, PCC is produced by the reaction of $CO_2$ with supernatant solution after Ca extraction from steel slag followed by the separation of solid and liquid. The development status of MC using steel slag is at the pilot stage (Slag2PCC at Aalto University), and there remains the process economics improvement for commercialization. Key technologies for the further development are efficient extraction of Ca ions from steel slag including impurities removal, valorization of PCC via shape and size control, usage development and value-addition of residual slag, and optimization of reaction conditions for continuous process setup, etc.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.149-158
• /
• 2005

This paper proposed a blind watermarking method for video contents which satisfies both the invisibility and the robustness to attacks to prohibit counterfeiting, modification, illegal usage and illegal re-production of video contents. This watermarking algorithm targets MPEG compression system and was designed to control the amount of watermarking to be inserted according to the adaptive quantization scale code to follow the adaptive quantization of the compression system. The inserting positions of the watermark were chosen by considering the frequency property of an image and horizontal, vertical and diagonal property of a $8{\times}8$ image block. Also the amount of watermarking for each watermark bit was decided by considering the quantization step. This algorithm was implemented by C++ and experimented for invisibility and robustness with MPEG-2 system. The experiment results showed that the method satisfied enough the invisibility of the inserted watermark and robustness against attacks. For the general attacks, the error rate of the extracted watermark was less than $10\%$, which is enough in robustness against the attacks. Therefore, this algorithm is expected to be used effectively as a part in many MPEG systems for real-time watermarking, especially in the sensitive applications to the network environments.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.97-106
• /
• 2009

self-loading, various problems related to construction can be solved as well as the save of construction cost. Thus, this study has an aim of applying foam concrete to structural purpose by adding bottom ash as a reinforcing material like fine aggregate, in contrast to conventional non-structural usage such as soundproofing or insulating materials. In addition, it was evaluated in terms of unit volume weight, flow value, air void, water absorption and dosage of foam agent wether replacement of cement by granulated blast furnace slag or fly-ash has an effect on the material characteristics of foam concrete. As results of experiments, it can be found that the increase of fine aggregate ratio, that is to say, the increase of bottom ash results in the increase of unit volume weight, while decreasing air void and flow value. But, appropriate addition of bottom ash to foam concrete makes it easy to control a homogeneous and uniform quality in foam concrete due to less sensitive to bubbles. As the replacement ratio of mineral admixtures such as granulated blast furnace slag and fly-ash increases, as unit volume weight tends to decrease. In the meanwhile, serious effects were shown on fluidity of foam concrete when more than limit of replacement ratio was applied.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.9
• /
• pp.1340-1349
• /
• 2012

Increasing the oxidation of fat through exercise is the recommendable method for weight control. Preceding researches have proposed increase in the usage of fat during exercise in stabilized state and under maximum exertion through aerobic training. However, such researches require additional equipment for gas analysis in order to measure the caloric value or gas exchange of subjects during exercise. Such equipments become highly restrictive for those exercise and cause substantially higher cost. According to this, we have presented the method of estimating the maximal fat oxidation point through changes in LF & HF which reflects changes in heart rate and the autonomic nervous system in order to induce exercise for a less restrictive and efficient fat oxidation than existing methods. We have conducted exercise stress test on subject with similar exercise abilities, and have detected the changes in heart rate and changes in LF & HF by measuring changes in fat oxidation and measuring ECG signals at the same time through a gas analyzer. Changes in heart rate and HRV of the subjects during exercising was detected through only the electrocardiographic signals from exercising and detected the point of maximum fat oxidation that differs from person to person. The experiment was carried out 16 healthy males, and used Modified Bruce Protocol, which is one of the methods of exercise stress test methods that use treadmill. The fat oxidation amount during exercise of all the subjects showed fat oxidation of more than 4Fkcal/min in the exercise intensity from about 5 minutes to 10 minutes. The correlation between the maximal fat oxidation point obtained through gas analysis and the point when 60% starts to be relevant in the range from -0.01 to 0.01 seconds for values of R-R interval from changes in heart rate had correlation coefficients of 0.855 in Kendall's method and in Spearman's rho, it showed significant results of it being p<0.01 with 0.950, respectively. Furthermore, in the changes in LF & HF, we have determined the point where the normalized area value starts to become the same as the maximal fat oxidation point, and the correlation here showed 0.620 in Kendall and 0.780 in Spearma of which both showed significant results as p<0.01.

• The KIPS Transactions:PartA
• /
• v.19A no.3
• /
• pp.139-146
• /
• 2012

In the server cluster environment, one of the ways saving energy is to control server's power according to traffic conditions. This is to determine the ON/OFF state of servers according to energy usage of data center and each server. To do this, we need a way to estimate each server's energy. In this paper, we use a software-based power consumption estimation model because it is more efficient than the hardware model using power meter in terms of energy and cost. The traditional software-based power consumption estimation model has a drawback in that it doesn't know well the computing status of servers because it uses only the idle status field of CPU. Therefore it doesn't estimate consumption power effectively. In this paper, we present a CPU field based power consumption estimation model to estimate more accurate than the two traditional models (CPU/Disk/Memory utilization based power consumption estimation model and CPU idle utilization based power consumption estimation model) by using the various status fields of CPU to get the CPU status of servers and the overall status of system. We performed experiments using 2 PCs and compared the power consumption estimated by the power consumption model (software) with that measured by the power meter (hardware). The experimental results show that the traditional model has about 8-15% average error rate but our proposed model has about 2% average error rate.

• The KIPS Transactions:PartC
• /
• v.13C no.7 s.110
• /
• pp.889-896
• /
• 2006

ATM Forum has defined a guaranteed frame rate (GFR) service to serve Internet traffic efficiently. The GFR service provides virtual connections (VCs) for minimum cell rate (MCR) guarantees and allows them to fairly share the residual bandwidth. And ATM Forum has recommended a frame-based generic cell rate algorithm (F-GCRA) as a frame classifier, which determines whether an Am cell is eligible to use the guaranteed bandwidth in a frame level. An ATM switch accommodates cells in its buffer or drops them in a frame level according to current buffer occupancy. A FIFO shared buffer has so simple structure as to be feasibly implemented in switches, but has not been able to provide an MCR guarantee for each VC without buffer management based on per-VC accounting. In this paper, we enhance the F-GCRA frame classifier to guarantee an MCR of each VC without buffer management based on per-VC accounting. The enhanced frame classifier considers burstness of TCP traffic caused by congestion control algorithm so as to enable each VC to use its reserved bandwidth sufficiently. In addition, it is able to alleviate the unfairness problem in usage of the residual bandwidth. Simulation results show that the enhanced frame classifier satisfies quality of services (QoSs) of the GFR service for the TCP traffic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1040-1046
• /
• 2010

The main disadvantage of rapid setting concrete is the occurrence of cracking because of fast hydration reaction due to high thermal expansion and shrinkage. However, if the fly ash is used in concrete, it is possible to prevent cracking since the hydration heat can be decreased. Although Very-Early Strength-Latex Modified Concrete(VES-LMC) is an excellent material, occurrence of cracking has been reported because of high hydration heat. In the present study, new method which can apply the fly ash to the VES-LMC was developed. Research for the new method to improve the safety for the cracking was conducted. Safety was confirmed by reducing the shrinkage and hydration heat in the condition of overcoming the low early-age strength. Detailed conclusions are follows. Early-age compressive strength was decreased a little with increase of UFFA content. However, 28-d compressive strength was statistically insignificant regardless of UFFA contents. If the UFFA is replaced 15% to 20% of unit cement weight in concrete, maximum shrinkage can be reduced up to 43% to 47%. Usage of UFFA in VES-LMC guarantees the safety for cracking since it is very effective to control of early-age shrinkage.

• The KIPS Transactions:PartA
• /
• v.15A no.4
• /
• pp.227-238
• /
• 2008

Recently, as network environment has broadened, the demands on VOD have been increased. The VOD services can be categorized into two types, RVOD and NVOD. Practical VOD services adopt one of them exclusively. Since a method using only one of RVOD and NVOD is not able to deal with frequently variable demand of clients, it leads to a result of overload on a server and a waste of server bandwidth. The efficiency of the network resource usage becomes lower. Hence this paper presents a study on the protocol for efficient VOD services. We propose a new protocol appliable for the existing VOD service algorithm, analyze its performance through simulation, and developed server/client systems applying the new protocol. We propose a mode switching protocol combined with protocols used in RVOD and NVOD. The proposed protocol is not able only to control both RVOD and NVOD but also to change the mode between RVOD and NVOD. As a result of using the proposed protocol to meet frequently variable demand, server bandwidth can be used efficiently. Especially, it can be applied to the existing VOD service algorithms. Therefore, we expect that the proposed protocol in this paper will be widely used in emerging VOD markets.

• Journal of radiological science and technology
• /
• v.29 no.1
• /
• pp.39-46
• /
• 2006

The rules and terms are described different meaning, in this results the research is accomplished for preventing practical workers from confusion. Atomic law are kept up modification and development in our situation by the ICRP's recommendation, on the other hand, the rules of diagnosis radiation equipment safety managements are modified partial, then resulted in confusion. The study was comparison between the rules of diagnosis radiation equipment safety management and atomic energy law, and the modification items obtained were as follows. 1. With each other different the terms and units are used. With the exception of special terms for affairs usage, it is needless to say that common term uniformity is standardized. The standardization of rules and guidance have not need to confusion radiological practical workers. 2. The following is omitted. 1) The radiation protection against tile patient and the hospital visitor. 2) Radiation dose limit of the woman patient who is in the process of becoming pregnant. 3) Radiation dose limit of the person who is not regarded as madical madical exposure. 4) The control of the exposure of pregnant of women at work.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.908-918
• /
• 2005

The effects of adding Lithospermum erythrorhizon(gromwell) extract on the quality characteristics of Kangjung were examined to improve tunctionality of Kangjung and usage of gromwell extract. There was no significant difference of moisture quantity in the quality of Kangjung at 0, 0.25, $0.5\%$ level of added wild and cultivated gromwell extract, whereas there was a significant difference at $0.5\%$ addition level. Expansion rates of Kangjung were $25\%$ for control, $23\%$, and $19\%$ for $0.25\%$, and $0.5\%$ cultivated gromwell extract added groups, respectively, and $24\%$, and $24\%$ and for $0.25\%$and $0.5\%$ wild groinwell extract added groups, respectively. The rates were slightly decreased with increasing addition level. The hardness and crispness as determined by texture analyser were lower in Kangjung with added $0.5\%$ wild and cultivated gromwell extracts than in the others. The sensory characteristics such as appearance, tenderness, taste and overall acceptability of Kangjung prepared with $0.25\%$ gromwell extract showed no significant difference compared to the controlled group. However, there was significant difference in Kangjung with $0.5\%$ gromwell extract added(p<0.05).