• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.89-100
• /
• 2014

Energy consumption statistics in 2005 from the Korea Energy Management Corporation show that building energy usage was about 24.2% of total domestic energy consumption, and 64% of total building energy usage was consumed by residential buildings. Thus, about 10% of total domestic energy consumption is due to the heating of residential buildings. Building energy can be calculated by the configuration of the building envelope and the rate of infiltration (the volume of the infiltration of outdoor air and the leakage of indoor air), and by doing so, the annual energy usage for heating and cooling. Therefore, air-tightness is an important factor in building energy conservation. This investigate air infiltration and various factors that decrease it in timber frame buildings and suggest ways to improve air-tightness for several structural types. Timber frame buildings can be classified into light frame, post and beam, and log house. Post and beam includes Han-ok (a Korean traditional building). Six light frame buildings, three post and beam buildings, one Korean traditional Han-ok and a log house were selected as specimens. Blower door tests were performed following ASTM E779-03. The light frame buildings showed the highest air-tightness, followed by post and beam structures, and last, log houses.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7785-7788
• /
• 2015

Utilization of high energy photons (>10MV) with an optimal weight using a mixed energy technique is a practical way to generate a homogenous dose distribution while maintaining adequate target coverage in intact breast radiotherapy. This study represents a model for estimation of this optimal weight for day to day clinical usage. For this purpose, treatment planning computed tomography scans of thirty-three consecutive early stage breast cancer patients following breast conservation surgery were analyzed. After delineation of the breast clinical target volume (CTV) and placing opposed wedge paired isocenteric tangential portals, dosimeteric calculations were conducted and dose volume histograms (DVHs) were generated, first with pure 6MV photons and then these calculations were repeated ten times with incorporating 18MV photons (ten percent increase in weight per step) in each individual patient. For each calculation two indexes including maximum dose in the breast CTV ($D_{max}$) and the volume of CTV which covered with 95% Isodose line ($V_{CTV,95%IDL}$) were measured according to the DVH data and then normalized values were plotted in a graph. The optimal weight of 18MV photons was defined as the intersection point of $D_{max}$ and $V_{CTV,95%IDL}$ graphs. For creating a model to predict this optimal weight multiple linear regression analysis was used based on some of the breast and tangential field parameters. The best fitting model for prediction of 18MV photons optimal weight in breast radiotherapy using mixed energy technique, incorporated chest wall separation plus central lung distance (Adjusted R2=0.776). In conclusion, this study represents a model for the estimation of optimal beam weighting in breast radiotherapy using mixed photon energy technique for routine day to day clinical usage.

• Wind and Structures
• /
• v.9 no.6
• /
• pp.493-503
• /
• 2006

The demand for energy in the world increases everyday. Blade energy which is wind turbine is a significant resource which must be appreciated in this field. Especially, in places where wind potential is high, the usage of wind energy is a beneficial factor for every country's economy. In this study, first, 6 different miniature rotor were produced by using 6 different NACA profiles. Rotors were produced with three blades. The electrical performance and the speed of start of action values that are provided from each rotor form were established by measuring them in the wind tunnel. The calculation of area and volumetric values of each profile and wind surfaces were made with AutoCad technical drawing program. As a result, it was searched whether there is any relation between electrical performance values and speed of start of motion that rotors produced and volumetric values of rotors. The aim of this study is to find out whether rotor blade volume is one of factors that influences rotor performance. The general tendency observed here is that the increase in the volume of rotor blade leads to an increase in the speed of start of motion and to a decrease in the rotor performance.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.1-8
• /
• 2006

In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch in the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Dynamic simulations of the influence of white water usage ratio and uncoated broke addition ratio on the variation of process variable was monitored as a function of time. Results from the dynamic simulations showed that the volume of reservoirs affected the dynamic behavior of the process. The dynamic behavior of flow rate and dissolved starch concentration in process units were different from each other. The speed of the change of dissolved starch concentration in process units was depend on the starting point of the change of dissolved starch concentration, the length of circulation loop, and the volume of reservoirs.

• Environmental Engineering Research
• /
• v.21 no.3
• /
• pp.284-290
• /
• 2016

Life cycle assessment (LCA) methodology can be used to assess impacts on the environment that might be generated during treatment of wastewater and sludge treatment. In this work, LCA methodology was suggested to evaluate monthly environmental impact of wastewater treatment plants (WWTPs). Two field scale WWTPs, A2/O process and conventional activated sludge process (CAS), were selected as target plants and the operational data were collected from those plants. As the function units, the unit volume of treated wastewater of $1m^3$ and 1 kg T-N eq. removed were selected. The environmental effect of target WWTPs operation were assessed as impact categories such as global warming potential, eutrophication potential, and so on. From monthly profiles of each index, it was shown that the environmental impact of WWTPs has seasonal patterns influenced by the influent flow rate variation causing higher impacts in winter than summer. This is due to the fact that there were no significant increase in the electricity consumption and chemical usage during the summer while the treated volume of wastewater was increased.

• Industrial Engineering and Management Systems
• /
• v.12 no.3
• /
• pp.172-180
• /
• 2013

We herein consider a stochastic multi-item inventory management problem in which a warehouse sells multiple items with stochastic demand and periodic replenishment from a supplier. Inventory management requires the timing and amounts of orders to be determined. For inventory replenishment, trucks of finite capacity are available. Most inventory management models consider either a single item or assume that multiple items are ordered independently, and whether there is sufficient space in trucks. The order cost is commonly calculated based on the number of carriers and the usage fees of carriers. In this situation, we can reduce future shipments by supplementing items to an order, even if the item is not scheduled to be ordered. On the other hand, we can reduce the average number of items in storage by reducing the order volume and at the risk of running out of stock. The primary variables of interest in the present research are the average number of items in storage, the stock-out volume, and the number of carriers used. We formulate this problem as a multi-objective optimization problem. In a numerical experiment based on actual shipment data, we consider the item shipping characteristics and simulate the warehouse replenishing items coordinately. The results of the simulation indicate that applying a conventional ordering policy individually will not provide effective inventory management.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.110-116
• /
• 2013

With the recent development of wireless network technologies, there have been increasing usage of variouse position base servies. Position based services basically collect position information of moving object for the utilization of them in real life. Accordingly, new index structures are required to efficiently retrieve the consecutive positions of moving objects. In the paper, we consider volume of Extended Minimum Bounding Rectangles(EMBR) to be determined by average size of range queries. We proposed the methode that split efficiently moving object with long distance between location, and split moving object for decrease searching space an Estimated-Split algorithm that minimizes the volume of MBRs is designed and simulated. Our experimental evaluation confirms the effectiveness and efficiency of our proposed splitting policy.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.6
• /
• pp.717-722
• /
• 2017

Objective : To evaluate the effectiveness and efficacy of delayed burr hole surgery in relation to the reduction of postoperative subdural hematoma (SDH) volume in patients with acute SDH. Methods : We retrospectively analyzed patients with acute SDH who received delayed burr hole surgery at our institute. Age, sex, Glasgow coma scale, maximal SDH thickness, volume of SDH, midline shifts, hounsfield unit (HU), and medical history of anticoagulant agent usage were recorded. Outcome measures were delayed operation day, reduction of SDH volume after operation, and the Glasgow outcome scale (GOS) score at discharge. The patients were divided two groups according to the postoperative reduction of volume of SDH (${\geq}50%$, group A; <50%, group B). We also analyzed variables and differences between two groups. Results : Eighteen patients were available for this analysis. The mean delayed of surgery was $13.9{\pm}7.5$ days. Maximal thickness of SDH was changed from $10.0{\pm}3.5mm$ to $12.2{\pm}3.7mm$. Volume of SDH was changed from $38.7{\pm}28.0mL$ to $42.6{\pm}29.6mL$. Midline shifts were changed from $5.8{\pm}3.3mm$ to $6.6{\pm}3.3mm$. HU were changed from $66.4{\pm}11.2$ to $53.2{\pm}20.6$. Post-operative reduction of SDH volume was $52.1{\pm}21.1%$. Eleven patients (61%) had a discharge GOS score of 1 (good recovery). Ten patients (56%) were enrolled in group A. Midline shifting was greater in group A than in group B ($7.4{\pm}3.3$ vs. $3.0{\pm}2.4mm$; p<0.02). The delay of surgery was shorter for group A than group B ($9.2{\pm}2.3$ vs. $19.8{\pm}7.7$ days; p<0.0008). Conclusion : Among well selected patients, delayed burr hole surgery in patients with acute SDH may be effective for reduction of SDH volume. Further studies will be necessary to establish the effectiveness and safety of delayed burr hole surgery in patients with acute SDH.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.233-239
• /
• 2007

The main objective of this study was to evaluate the effect of recycled PET fiber made from waste PET bottle on the control of plastic shrinkage cracking of cement based composites. PET is blown as a plastic material and used in a variety products such as a beverage bottle. However, waste PET bottles are thrown after the usage, raising huge problems in terms of the environment. Thus, the research on the method to recycle the PET bottles indicates important aspects in environment and economy. The method to recycle waste PET bottles as a reinforcing fiber for cement based composites is one of effective methods in terms of the recycle of waste PET bottles. In this research, the effect of recycled PET fiber geometry and length on the control of plastic shrinkage was examined through thin slab tests. A test program was carried out to understand the influence of fiber geometry, length and fiber volume fraction. Three type of recycled PET fibers including straight, twist crimped and embossed type. Three volume fraction and two fiber length were investigated for each of the three fiber geometry. Test results indicated that recycled PET fibers are effective in controlling plastic shrinkage cracking in cement based composites. In respect to effect of length of fiber, longer fiber was observed to have efficient cracking controlling with low volume fraction in same fiber geometry while shorter fiber controled plastic shrinkage cracking efficiently as addition rate increase. Also, embossed type fibers were more effective in controlling plastic shrinkage cracking than other geometry fiber at low volume fraction. But, for high volume fraction, straight type fibers were most effective in plastic shrinkage cracking controlling in cement based composites.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.56-63
• /
• 2013

This study surveyed MP3 player usage and evaluated its effect on hearing thresholds in high school students. It is reported an increase in risk factors for hearing loss in adolescents that paralleled the increase in sales of MP3 players. A total of 538 students in two high schools in Gwangju province participated in this study. The students completed questionnaires about their MP3 player use and their pure tone hearing thresholds were tested at several frequencies. The questionnaire results indicated that 61.1%, of the students listened to music on MP3 players for more than one hour per day, 71.6% listened for four or more days per week, and 36.7% had listened for more than 3 years. Listening at a high volume of 60% of the maximum level was reported by 51% and they recognized having ear pains. The pure tone hearing threshold was found to be raised for the adolescents who had a long history of MP3 listening at high volume (p< 0.0001).