• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.683-686
• /
• 2006

Accompanied by the demand of thin type TV, the application of the TFT LCD display device is more and more extensive. The key material which influences the optical performance of the TFT LCD is optical film. Due to the rapid development of the big size TFT LCD for the recent years, the supply has been unable to meet the demand for its relative material. Therefore, we bring up a alternate choice-the hybrid compensation film which could not only show well optical performance, but also lessen the quantity of usage in TAC in order to make the optical film free of shortage.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.219-221
• /
• 2009

In this paper, we present stereoscopic conversion based on movie shot information. To overcome the low stereoscopic quality of automatic stereo conversion technologies, the usage of the shot type is expected to provide more satisfactory stereoscopic perception. In general, movie clips are produced with a variety of shot techniques such as long shot, closeup shot, medium shot, etc. Each shot has its own characteristics that can be utilized during the conversion process. Furthermore, description sceme for shot and camera information is presented in XML. XML shot editor generates XML shot data. and conversion module parses such data and converts 2D image into stereoscopic image.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.2
• /
• pp.105-108
• /
• 2003

After stage-two surgery, the highest incidence of failure has been attributed to implant overload. However, the biomechanical factors cited inthe literature that contribute to implant overload, such as bone type, cuspal inclination, horizontal offset, maxillary compared to mandibular arch, the inclusion of natural teeth within the prosthesis, and occlusal harmony are superimposed on physiologic variations. Following two cases, including reduction of cuspal inclination and usage of modified incisal pin, showed a method of contouring occlusal surface for reduction of unpreditable implant overload.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.67-76
• /
• 2006

This study aims to identify the factors that influence adoption intentions towards portable Internet service, based on the individual characteristics that assist in creating markets and developing strategies. Two types of factors are defined: individual characteristics including demographics, existing services usages, prior knowledge, adoption attitudes, and service evaluations; and adoption intentions including the willingness to subscribe, subscription term, willingness to pay, usage type, and preferred terminal. The results indicate that the importance of demographic variables depends on adoption intentions, and that users of mobile Internet service and wireless LAN are probably targets for portable Internet service. Furthermore, the results demonstrate the need for an enhanced perception of the usefulness and ease of use of service, as well as an intensive marketing activity for potential users and a bearable innovation to stimulate the market for portable Internet service.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.9
• /
• pp.1727-1735
• /
• 2002

The usage of beam scanning type laser marker is rapidly increasing in the field of semiconductor equipment. A device called ″beam adjuster″ is employed to adjust the visible diode laser, which points the marking position for various setting. The device is very sensitive to manufacturing tolerance and assembly condition. Axiomatic approach has been applied to the design of the device. An existing design is analyzed based on the Independence Axiom. The existing design is found to violate the axiom. Two new designs are proposed to satisfy the Independence Axiom. The Information Axiom is utilized to evaluate the designs. A design is selected to have the minimum information content. The significance of this research is that a full cycle of axiomatic design is applied to a real engineering product.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.356-363
• /
• 2001

The friction pendulum type seismic isolation system (FPS) using the PTFE based materials has been developed to provide a simple and effective way to achieve earthquake resistance for buildings. PTFE matrials are soft and apt to be deformed easily after a few working cycles. Instead of the usual PTFE materials, the Polyimide material was used in this research. Polyimide is harder than PTFE, but has smaller friction coefficient and longer duration fur usage. In this paper, various kinds of PTFE materials were tested to define the frictional characteristics compared with the Polyimide material. FPS was manufactured with fine surface roughness and used with Polyimide material to show the seismic isolation efficiency, and life duration when applied to a rigid mass model and a 5 stole frame model.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.117-120
• /
• 2004

Immersive virtual reality provides an effective way of visualizing and analyzing various spatial data, such as wireline logs, three-dimensional seismic, and interpreted geologic boundaries, and etc. Although it is a valuable tool for oil and gas exploration, its usage has been limited to a specific area because of its high development costs. This paper describes the development of an immersive virtual reality system, known as CAVE (Cave Automatic Virtual Environment) that maximizes immersiveness with reasonable prices by using general purpose PC and projectors.

• Korean Journal of Organic Agriculture
• /
• v.17 no.2
• /
• pp.151-170
• /
• 2009

The objectives of this study were to analysis the nutrient cycles of agricultural by-products. The region, in which agricultural by-products are circulated for use within the agroecosystem for minimizing the input of artificial nutrients as well as generation of wastes, and where ecologically industrial diversity is formed, was defined as the regional agriculture focused on eco-industrial approach. Plan in stages for promoting ahead with the regional agriculture focused on eco-industrial approach is as follows: First of all, "The Consultation Body for Circulating & Using By-products" should be formed. Secondly, usage of agricultural by-products is identified to select the facilities of recycling and its location including the type and amount. Thirdly, the facilities for recycling of resources and infrastructure are installed. Finally, the facilities for recycling and resource circulation system within the area are efficiently managed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1473-1478
• /
• 2000

Severe fork-lift truck noise is annoying to an operator as well as one of the noise pollution elements. This paper presents the noise contribution analysis of a cabin type fork-lift truck to identify the major sources and its usage to reduce the interior noise level. The methodologies for this work are sound field analysis, sound intensity test, insertion loss test of duct system and etc. An effective method to suppress interior noise level of fork-lift truck and design guides are suggested.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.386-389
• /
• 2002

It may be necessary to apply a daily fever to operate the municipal solid waste landfill. The daily cover helps to control nuisance factors such as the escape of odors, dusts and airborne emissions, and can control the population of disease vectors. Also it may be reduce the infiltration of rain, decreasing the generation of leachate and the potential for surface water and groundwater contamination. Because of its usual availability and traditional usage as the municipal solid waste landfill, soil remains as the most common daily cover material. However, soil tends to reduce the volume of dumping waste c;3pacity in the landfill, it also reduces a period of using in the landfill. Therefore, it is necessary to research about Alternative Daily Cover Materials (ADCMs) because of the limitation of landfill sites. Recently, The types of ADCMs are classified into geosynthetics, forms, spray-ons, indigenous materials. In this study, the authors have tested the spray type of Alternative Daily Cover(ADC) using by flyash, alum with cement. The development. of ADCMs will be highly effective in terms of prolongation using landfill.