• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.3
• /
• pp.235-245
• /
• 2005

The rapid development of computer network technology has brought the Internet as the major infrastructure to our society. But the rapid increase in malicious computer intrusions using such technology causes urgent problems of protecting our information society. The recent trends of the intrusions reflect that the intruders do not break into victim host directly and do some malicious behaviors. Rather, they tend to use some automated intrusion tools to penetrate systems. Most of the unknown types of the intrusions are caused by using such tools, with some minor modifications. These tools are mostly similar to the Previous ones, and the results of using such tools remain the same as in common patterns. In this paper, we are describing design and implementation of attacker-traceback system, which traces the intruder based on the multi-agent architecture. The system first applied SOM to classify the unknown types of the intrusion into previous similar intrusion classes. And during the intrusion analysis stage, we formalized the patterns of the tools as a knowledge base. Based on the patterns, the agent system gets activated, and the automatic tracing of the intrusion routes begins through the previous attacked host, by finding some intrusion evidences on the attacked system.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.50-57
• /
• 2015

A traditional garden in Korea has diverse cultural, historical values, such as the then phases of the times, life phase, culture and art, etc. because it was developed on the basis of the harmony between nature and artificial structures. However, in reality, it's urgent to do efficient, continuous maintenance of traditional gardens which are being damaged and lost due to the problems like an owner's aging, inheritance, and lack of management, etc., especially in case of private property which was designated as a cultural property among such traditional gardens under the Cultural Properties Protection Law. Accordingly, this study conducted this research in a bid to use these research results as basic evidentiary materials for suggesting directivity in introduction of park planning of traditional gardens in folk houses in the near future by implementing the case investigation of transformation into public parks from traditional private gardens in Japan, which is putting the newly introduced park planning to efficient use, together with its systematic management, and the survey on domestic traditional gardens in folk houses status, as well as the hearing-based survey on a traditional gardens in folk houses owner's level of willingness to accept the introduction of parking planning. As a result, this study could confirm that in case of traditional gardens in Japan, they are mobilizing the revenue from admission fees for traditional gardens maintenance by incorporating the main entity of possession, and Japan is promoting transformation of traditional gardens into parks on the basis of use and preservation through the connection with local governments and research institutes. In addition, as a result of surveying domestic traditional gardens in folk houses, it was found that most of the garden owners had hardships in its management, and they were positive about systematic maintenance of gardens through park planning.

• Journal of Arbitration Studies
• /
• v.13 no.2
• /
• pp.47-68
• /
• 2004

The problems on application for custody in CIETAC Arbitration Rule are examined in this paper. First, The issue of jurisdiction for application for custody is arisen from the expansion of material jurisdiction of CIETAC. Until 1998, CIETAC had a jurisdiction only for the cases involving foreigners, but now, it has a jurisdiction not only for the cases involving foreigners but also for domestic cases. In the cases of arbitrating disputes involving foreigners, if the parties concerned apply for the preservation of property, CITEAC shall forward the application to and obtain a ruling from an intermediate people's court in the place where the object of the application resides, or where the property is located. But in the cases of arbitrating domestic disputes, if the parties concerned apply for the preservation of property, CITEAC shall forward the application to and obtain a ruling from an ground-level people's court in the place where the object of the application resides, or where the property is located. Therefore, "People's court" in article 23 of CIETAC Arbitration Rule includes both intermediate people's court and ground-level people's court in its meaning. Second, in the cases that the party concerned submits arbitration to CIETAC, it is not permitted for the party to ask the people's court for custody of property before submitting an arbitration. But there still can be the urgent cases that interests of the party concerned are at stake, and legitimate rights and interests of the party concerned may be damaged beyond remedy, if no application for custody of property is filed immediately. In that cases, even if the party may apply for custody of property with the people's court after submitting an arbitration, it might be too late to preserve property. Therefore, Chinese laws and rules have to be revised so that the party may ask the people's court for custody of property before submitting an arbitration. When revising laws and rules, according to the today's legislation trends, it must be considered that court and arbitration tribunal both have a right to decide the custody of property. When arbitration tribunal decides it, the procedural provisions executing it must be provided. It is also required that China permit to apply preservation of evidence as well as custody of property before submitting an arbitration. It is also strongly recommended that China permit custody of property or preservation of evidence even in the cases that an arbitration is submitted to the arbitration institute which is located in foreign country, not in China.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.164-170
• /
• 2017

The CNC machine tool field is showing a growing trend with the recent rapid development of manufacturing industries such as semiconductors, automobiles, medical devices, various inspection and test equipment, mechanical metal processing equipment, aircraft, shipbuilding and electronic equipment. However, small and medium-sized machining companies that use CNC machine tools are experiencing difficulties in increasingly intense competition. Especially, small companies which are receiving orders from 3rd or 4th venders are very difficult in business management. In recent years, company S experienced difficulty to make product quality and delivery time due to the ignorance of the processing method when manufacturing cooling plate jig made of SUS304 material used for cell phone liquid crystal glass processing. In order to solve these problems, we redesigned the process according to the size of our company and tried to manage all processes with quantified data. In the meantime, we have found that there is a need to improve the cutter process, which accounts for most of the machining process. Therefore, we have investigated the correlation between RPM and FEED of three cutters that have been used in the past. As a result, we found that it is the most urgent problem to solve the roughing process during the cutter operation which occupies more than 70% of the total machining. In order to shorten the machining time and improve the quality in machining of SUS304 cooling plate jig, we select the main factors such as price, tool life, maintenance cost, productivity, quality, RPM, and FEED and use AHP to find the most suitable milling cutter. We also tried to solve the problem of delivery, quality and production capacity which was a big problem of S company through experiment operation with selected cutter tool. As a result, the following conclusions were drawn. First, the most efficient of the three cutters currently available in the machining center has proven to be an M-cutter. Second, although one additional facility was required, it was possible to produce the existing facilities without additional investment by supplementing the lack of production capacity due to productivity improvement. Third, the Company's difficulties in delivery and capacity shortfalls have been resolved. Fourth, annual sales increased by KRW 109 million and profits increased by KRW 32 million annually. Fifth, it can confirm the usefulness of AHP method in corporate decision making and it can be utilized in various facility investment and process improvement in the future.

• The Korean Journal of Air & Space Law and Policy
• /
• v.1
• /
• pp.163-191
• /
• 1989

The accident of the midair collision, passengers' falling or goods' dropping occurs or supersonic aircraft make a sonic boom during their conveying passengers or goods to the destination. The accident in transmit damages the their parties on the surface or their properties. In these cases, the third parties who were harmed to their lives or properties have the right to claim damages against the air carrier who caused them. These matters have become one of the important things since aircraft conveyed passengers and goods. Therefore, it is a great concern to settle these matters by law. But the Safety of the present aircraft has been much increased and the aircraft have become larger in size. Its flight altitude became higher than before. So the relationship of the aircraft to the third parties is much different from that of the earlier aircraft. The air transport is now indispensable to our life. It is not so easy to control these matters. In the early part of 20th century, when the third parties suffered the damage, many European countries made laws on the basis of the principle of liability without fault. But each country had a variety of its own law, and different kinds of difficulties have been brought about. Accordingly, the Rome Convention on Surface Damage (1933, 1952, 1978) has been made and revised. In spite of being revised, it contains many problems, and is not carried into effect world-wide. On the other hand, there are no regulations about the compensation of the third parties damaged in Korean existing laws. In case the damage is brought about to them, it is obviously true that the settlement of the liability of compensation for damage should be made by the general principle on the tort in domestic laws. At this point, it is urgent that we make a special law though the domestic legislation as a preliminary measure before we sign the international convention to save third damaged. It is desirable that we should, for the responsibility of the air carriage for the demage of the third parties on the surface, bring in the theory of the absolute liability in view of the legislation of many conutries. As the aircraft fly in the sky, their flight always contains some danger. It is very difficult to prove the fault, and the operator should suffer the principle of liability without fault or the similiar one. In case the liability without fault will be imposed upon the operator for the damage of the third parties, it is necessary to bring in the liability protection system for the protection and up upbringing of the air carriage. The Burden of danger of the air carriage will be reduced by introducing the system. A domestic legislation measure should be necessarily taken as soon as possible as a legal security measure on these matters.

• Korean Journal of Environment and Ecology
• /
• v.19 no.2
• /
• pp.150-161
• /
• 2005

Soraksan National Park and Odaesan National Park, that are 20.7 km apart, should play an important role as habitats and corridors for wildlife because they are located in the center of Baekdudaegan. However, landscape features such as small area, fragmentation, and geographic isolation seem to impede the proper ecological functions of these two national parks. Using GIS technique, we examined the pattern of fragmentation in these two national parks and adjacent regions (Sokcho-si, Goseong-gun, Inje-gun, Yangyang-gun, and Hongcheon-gun) encompassing a total of $4573.5km^2$ in area. We then selected the patches suitable for an endangered carnivorous species, leopard cat, based on habitat conditions, and identified the network and stepping stone among patches to enable leopard cats to migrate. Diverse roads and artificial facilities in the study area generated a total of 24,701 patches: 39 patches among these were selected as potential habitats upon considering the habitat condition such as vegetation types and minimum area for leopard cat. Three patches nearby Gyebangsan and Bangtaesan were identified as a potential network center to relieve the effects of fragmentation and isolation of the two national parks. Our results also showed that patches containing Jombongsan and Bangtaesan would act as a source patch from there leopard cats can disperse to both national parks. It is an urgent task to identify the pattern of fragmentation and the connectivity between patches in national parks and adjacent areas for wildlife conservation because almost all national parks confront land- scape problems similar to the two national parks examined in this study.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.211-222
• /
• 2020

The purpose of this study is to derive a plan to improve the standard of survey cost, which is a system for estimating survey cost operated by the National Geographic Information Institute. The current standard has not been revised significantly since the initial enactment. However, in the situation where the survey industry is getting worse, the actualization of the standard is an urgent task for training engineers and industrial development. In this study, in order to break the problems of the standard and to derive improvement plan, we analyzed the outline, basic characteristics, and history of the standard and compared it with similar domestic ones. We collected opinions from the government and the industry through a survey, and verified labor cost and overhead rates. The conclusions are as follows. First, it is necessary to complement standard for production rate that directly affects direct cost, and to compensate for the missing items in the direct cost. Second, when compared with cost standards in foreign countries and cadastre field, the labor cost in survey field was found to be very low and improvement is needed. Third, the overhead rates were assessed to be appropriate, and the problem of improper overhead design should be coped with by strengthening education and promotion. Fourth, it is necessary to consider the introduction of deliberation committee or standard market price system for rapid response to new technologies.

• The Journal of Korean Society for School & Community Health Education
• /
• v.6
• /
• pp.89-107
• /
• 2005

The purposes of this study were to investigate the recognition and the needs and problems of in-service education for school nurse, and to suggest the desirable guidelines, for supples the basic data of in-service education for school nurse to upgraded the quality as school nurse's professional specialist. The subjects of this study were 376 school nurses who were working in Jollanamdo. The research instruments used in this study was 'Needs of In-service Education questionnaire'. 305 collected Data were analyzed with the frequency analysis, $x^2$-test. The conclusions were as follows; First of all, the most important motives for the school nurses to participate in-service education are the enhancement of their specialties on teaching profession, self-realizations as educators, and improvement of health teaching skill. However, the motives to obtain the skill for school management or to obtain a high rank qualification and promotion are quite low. School nurses are generally satisfied with duration, time, place of in-service education, But they are not satisfied with contents of in-service education, professional specialist and understanding of real educational situation of the instructors. On the urgent problem of school nurses, promotion of health teaching skill was highest in the rank, and establishment of firm educational philosophy and a sense of teaching profession, proceed to university and graduate school ranked next, respectively. Second, the need of a school nurses on in-service education direction ranked the application of teachers' character and need, practicable and concrete educational programs, planning of school health development, reinforcement of health education, expansion of practical knowledge and on reflection thought, respectively. The need of a school nurses on in-service education contents(major part) ranked health education, health promoting program of student, knowledge and practice of practical medicine and oriental medicine, consultation process, health education of advanced country, respectively. The need of in-service education supervisory organization, the need for a cities provinces educational office was highest in the rank. The need of in-service education type, duty training ranked high, and abroad training, qualification training, general training ranked next. the need for specialist for lecturer of in-serve education ranked among the highest, along with school nurses and university professor. The need of school nurses on education method(duplication answer), need for conference and discussion teaching was highest in the rank. The need on evaluation method, evaluation through a examination ranked the highest. On the needs of in-service education times, need for vacation during the winter and summer was the highest. As for the duration, 31 to 60 hours in duration of in-service education was need most, and most school nurses need cities and provinces in-service training institute as the location of in-service education. On the organization size, need for 21 to 30 people was the highest, where as need for 41 people was relatively low. Lastly, on the problem of in-service education for school nurses, lack of opportunity of in-service education for school nurses was highest in the rank, and improperness of in-service education contents and method, lack of incentive ranked next, respectively.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.97-111
• /
• 2009

Image-based traffic information collection systems have entered widespread adoption and use in many countries since these systems are not only capable of replacing existing loop-based detectors which have limitations in management and administration, but are also capable of providing and managing a wide variety of traffic related information. In addition, these systems are expanding rapidly in terms of purpose and scope of use. Currently, the utilization of image processing technology in the field of traffic accident management is limited to installing surveillance cameras on locations where traffic accidents are expected to occur and digitalizing of recorded data. Accurately recording the sequence of situations around a traffic accident in a signal intersection and then objectively and clearly analyzing how such accident occurred is more urgent and important than anything else in resolving a traffic accident. Therefore, in this research, we intend to present a technology capable of overcoming problems in which advanced existing technologies exhibited limitations in handling real-time due to large data capacity such as object separation of vehicles and tracking, which pose difficulties due to environmental diversities and changes at a signal intersection with complex traffic situations, as pointed out by many past researches while presenting and implementing an active and environmentally adaptive methodology capable of effectively reducing false detection situations which frequently occur even with the Gaussian complex model analytical method which has been considered the best among well-known environmental obstacle reduction methods. To prove that the technology developed by this research has performance advantage over existing automatic traffic accident recording systems, a test was performed by entering image data from an actually operating crossroad online in real-time. The test results were compared with the performance of other existing technologies.

• Korean Journal of Community Nutrition
• /
• v.9 no.2
• /
• pp.233-240
• /
• 2004

This study was design to grope the suggestions leading synergic effects by bridging the gap between headquarters and branch office, and so to identify the infra-system of contract foodservice management company (CFMC) necessary for operating any kind of branch office including school, hospital and business and industry (B＆I). Among 8 categories consisted of infra-system in CFMC, 'C8. Evaluation ＆ analysis for branch office's operation' was the most important category in the headquarter's viewpoint, while 'C3. Sanitation management system' was the most important category in branch office's viewpoint. In support and application, 'C3. Sanitation management system' was the highest category in both headquarters and branch offices including school, hospital and B＆I. As a result of analysis on gap between main and branch office in importance, support and application in 8 categories, the efforts of communication and community of perception for infrastructure were needed, because 'C4. Education ＆ training for human resource management (HRM) system' and 'C8. Evaluation ＆ analysis for branch office's operation' in importance, 'C2. Menu management system', 'C4. Education ＆ training for HRM system', 'C6. Facility ＆ utility support system' and 'C8. Evaluation ＆ analysis for branch office's operation' in support had a gap. Correlation analysis to grasp the relation between importance of infra-system and headquarters' support or branch office's application showed that headquarters's importance and support were correlated positively in 'C3. Sanitation management system', 'C6. Facility ＆ utility support system', 'C7. Customer satisfaction management system' and 'C8. Evaluation ＆ analysis for branch office's operation' and branch office's importance and application were correlated positively in 'C1. Procurement ＆ food processing system', 'C5. Management Information system', 'C7. Customer satisfaction management system' and 'C8. Evaluation ＆ analysis for branch office's operation'. Lastly, 'C6. Facility ＆ utility support system' in the branch office of school and hospital and 'C2. Menu management system' in the branch office of B＆I were high in importance, low in support and application, therefore Intensive support for these categories was needed. In conclusion, continuous check and improvement for categories, which were identified as an urgent problems to be solved in this study, among infra-structure qualifying for CFMC, would enable contract foodservice industry that has grown quantitatively till now to grow qualitatively.