• Title/Summary/Keyword: Urea Concentration

Search Result 723, Processing Time 0.025 seconds

Simultaneous Measurement of Liquid-level, Concentration and Temperature of a Urea Tank using Ultrasonic and Electrical Conductivity Sensors (초음파와 전기전도 센서를 이용한 우레아 탱크 수위, 농도 및 온도의 동시 측정 방안)

  • Choi, Byungchul;Kim, Taewook
    • Journal of Power System Engineering
    • /
    • v.21 no.5
    • /
    • pp.71-78
    • /
    • 2017
  • The purpose of this study is to propose the basic data for the development of a sensor capable of simultaneously measuring the liquid-level, concentration and temperature of a urea tank using ultrasonic and electrical conductivity sensors for diesel vehicles with a urea-SCR system. It was found that the liquid-level of the urea tank using the ultrasonic sensor showed a good linearity with the actual liquid-level, and the urea concentration maintained good linearity in the range of 32.5 wt% to 10 wt%. It was an effective measurement of urea concentration to use the electrical conductivity sensor in the temperature range of $-10{\sim}22^{\circ}C$ and to use the ultrasonic sensor at $22^{\circ}C$ or more. Simultaneous measurement of concentration, liquid-level and temperature of the urea tank will be possible by attaching the electrical conductivity sensor and the ultrasonic sensor (split-type) to one sensor together.

Electrical Characteristics of Poly(ethylene oxide)-urea Complex Films

  • Cho, Mi-Yeon;Cho, Kyoung-Ah;Kim, Sang-Sig
    • Transactions on Electrical and Electronic Materials
    • /
    • v.13 no.3
    • /
    • pp.136-138
    • /
    • 2012
  • The electrical characteristics of complex films composed of poly(ethylene oxide) (PEO) and urea as a function of the urea concentration were examined in this study. Moreover, their structural characteristics were also compared. Depending on the urea concentration, the structural phases were classified as PEO+${\beta}$-phase composite, ${\beta}$-phase+${\alpha}$-phase composites, or ${\alpha}$-phase composite+urea. At urea concentrations below ~0.064 M, the ${\beta}$-phase was dominant in the complex film. Moreover, the conductance increased rapidly with an increase in the urea concentration. For urea concentrations ranging from ~0.064 to ~0.25 M, the ${\beta}$-phase was gradually substituted by the ${\alpha}$-phase. As the film was composed entirely of the ${\alpha}$-phase at urea concentrations greater than ~0.25 M, its conductance was decreased. In this study, the electrical characteristics observed for the different phases are analyzed and discussed.

Usefulness of Milk Urea Concentration to Monitor the Herd Reproductive Performances in Crossbred Karan-fries Cows

  • Dhali, A.;Mishra, D.P.;Mehla, R.K.;Sirohi, S.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.1
    • /
    • pp.26-30
    • /
    • 2006
  • The study was undertaken to investigate the validity of milk urea concentration as an index of the reproductive performances in crossbred Karan-Fries (Holstein Friesian${\times}$Tharparkar) cows under farm condition. Milk urea was analysed in noon milk samples (1200 to 1300 h) to interrelate with the interval from parturition to first service, number of insemination per conception, first service conception rate and service period. Milk progesterone (P4) was analysed in noon milk samples on the day 1, 10, 20 and 30 post insemination to study the effect of milk urea concentration on early embryonic mortality. The interval from parturition to first service was found significantly (p<0.01) higher ($77.2{\pm}5.5$ days) when milk urea concentration was ${\geq}63.4mg/dl$. The average milk urea concentrations (mg/dl) were found $42.1{\pm}2.5$, $47.9{\pm}1.5$ and $50.3{\pm}3.1$, respectively in cows that conceived at $1^{st}$, $2^{nd}$ and $3^{rd}$ insemination. However, the variation was not statistically significant. The first insemination conception rate was found significantly (p<0.05) higher (68.8%) when milk urea level was ${\leq}32.4mg/dl$. The service period was found significantly (p<0.05) higher ($125.4{\pm}8.8$ days) when milk urea concentration was ${\geq}45.1mg/dl$. The milk P4 level indicated that the cows, those were detected as non-pregnant on day 60 post insemination were initially pregnant but the pregnancy was terminated sometime during the day 30 to 60 post insemination. The study indicates that the milk urea values may be used as an index of reproductive performances in dairy herd when individual animals are not being monitored for nutritional status. The altered milk urea values may be utilised by the farmers as ready reference to rectify the protein and energy nutrition in cows to achieve the better reproductive performances in herd.

Transport of Urea in Waterlogged Soil Column: Experimental Evidence and Modeling Approach Using WAVE Model

  • Yoo, Sun-Ho;Park, Jung-Geun;Lee, Sang-Mo;Han, Gwang-Hyun;Han, Kyung-Hwa
    • Journal of Applied Biological Chemistry
    • /
    • v.43 no.1
    • /
    • pp.25-30
    • /
    • 2000
  • The main form of nitrogen fertilizer applied to lowland rice is urea, but little is known about its transport in waterlogged soil. This study was conducted to investigate the transport of urea in waterlogged soil column using WAVE (simulation of the substances Water and Agrochemicals in the soil, crop and Vadose Environment) model which includes the parameters for urea adsorption and hydrolysis, The adsorption distribution coefficient and hydrolysis rate of urea were measured by batch experiments. A transport experiment was carried out with the soil column which was pre-incubated for 45 days under flooded condition. The urea hydrolysis rate (k) was $0.073h^{-1}$. Only 5% of the applied urea remained in soil column at 4 days after urea application. The distribution coefficient ($K_d$) of urea calculated from adsorption isotherm was $0.21Lkg^{-1}$, so it was assumed that urea that urea was a weak-adsorbing material. The maximum concentration of urea was appeared at the convective water front because transport of mobile and weak-adsorbing chemicals, such as urea, is dependent on water convective flow. The urea moved down to 11 cm depth only for 2 days after application, so there is a possibility that unhydrolyzed urea could move out of the root zone and not be available for crops. A simulated urea concentration distribution in waterlogged soil column using WAVE model was slightly different from the measured concentration distribution. This difference resulted from the same hydrolysis rate applied to all soil depths and overestimated hydrodynamic dispersion coefficient. In spite of these limitations, the transport of urea in waterlogged soil column could be predict with WAVE model using urea hydrolysis rate (k) and distribution coefficient ($K_d$) which could be measured easily from a batch experiment.

  • PDF

Effects of Urea and K2SO4 treatment on the mineral nutrient concentration and fruit skin color of 'Mibaekdo' peach fruits at harvest (Urea와 K2SO4 처리에 의한 복숭아 '미백도'에서 수확 시 과실의 무기성분 농도 및 과피색 변화)

  • Moon, B.W.;Yoon, I.K.;Moon, Y.J.;Nam, K.W.;Lee, Y.C.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.15 no.1
    • /
    • pp.95-105
    • /
    • 2013
  • This study has been conducted to investigate the effect of Urea and K2SO4 treatment at stone hardening stage and 20 days before harvest on soil chemical properties, mineral nutrient concentration and quality of 'Mibaekdo' fruit peach. K concentration after Urea and K2SO4 treatment in soil was increased significantly by Urea 162g+K2SO4 188g/tree(standard amount) treatment at stone hardening stage, K2SO4 1.0% tree-spray, Urea 81g+K2SO4 94g/tree(half amount), Urea 162g+K2SO4 188g/tree and Urea 324g+K2SO4 376g/tree(double amount) soil treatment before harvest 20 days compared to control. T-N, K and Ca concentration in leaf was increased significantly by all treatment. but Na concentration in leaf was increased by Urea 0.5% and K2SO4 1.0% tree-spray treatment before harvest 20 days. T-N concentration in fruit skin was increased significantly by standard amount soil treatment, which decreased by K2SO4 1.0% tree-spray and half amount soil treatment. T-N, K and Ca concentration in fruit flesh(1~10mm depth flesh from peel) were increased markedly by all treatment excepted Urea 0.5% tree-spray. The leaf weight at harvest was increased markedly by Urea 0.5% tree-spray, standard amount and double amount treatment before harvest 20 days. Fruit weight was increased significantly by standard amount compared to all treatment. Red fruit skin(Hunter a value) progress was effective by K2SO4 tree-spray, half amount and double amount treatment before harvest 20 days. Fruit SSC was increased significantly by Urea 0.5% and K2SO4 tree-spray before harvest 20 days, standard amount treatment at stone hardening stage compared to control.

Effect of Dietary Feeding Regimens on Urea and Protein Concentration of Milk in Murrah Buffaloes

  • Roy, B.;Mehla, R.K.;Sirohi, S.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.18 no.7
    • /
    • pp.973-979
    • /
    • 2005
  • The present study was planned to examine the effect of different feeding regimens on milk urea concentration and milk protein concentration. The objectives are to describe the diurnal variations of milk urea (MU) concentration and to predict plasma urea (PU) concentration from MU concentration. Six lactating Murrah buffaloes were distributed in two groups and were fed two different diets in a crossover design. The diets consisted of leguminous crops as diet 1 (berseem (Trifolium alexandrinum)+concentrate mixture 1+wheat straw)) and non-leguminous crops as diet 2 (oats (Avana sativa)+concentrate mixture 2+wheat straw). All the diets were isocaloric and isonitrogenous. Each diet was fed to the animals for a period of 28 days, followed by a 10 day gap to obviate the carry over effect of the previous diet and then a switch over to the other diet. Digestibility trials were conducted on the last 7 days of each feeding period. Milk samples were collected on day 3, 7, 10, 14, 17, 21, 24 and 28 of the feeding period and blood samples were collected on the same day at morning within 30 minutes after morning milking. The average milk urea (MU) values (mg/dl) differed significantly (p<0.01) and were 44.83${\pm}$0.62 and 42.53${\pm}$0.73, respectively, for diets 1 and 2. Milk urea concentrations (mg/dl) also varied (p 0.01) among the days of feeding period, but were stabilized after 10th day of feeding period. In contrast, diets and days of feeding period had no significant effect on percent milk protein. Plasma urea concentration showed a significant (p<0.01) positive correlation (r = 0.93) with MU concentration. To predict the PU from MU the following equation was developed 'PU = 10.67${\pm}$0.76${\times}$MU (mg/dl) with $R^2$ = 0.87'. A clear diurnal variation of MU was found with lowered morning value (42.04${\pm}$0.68 mg/dl) than the evening value (45.32${\pm}$0.66 mg/dl). Present findings suggested that MU or PU concentration could be used as an indicator to monitor the feeding strategy. Plasma urea can be predicted from MU, whenever interpretation of milk urea data required consideration of diurnal variation.

Influence of polymer-coated slow-release urea on total tract apparent digestibility, ruminal fermentation and performance of Nellore steers

  • Gardinal, R.;Calomeni, G.D.;Consolo, N.R.B.;Takiya, C.S.;Freitas, J.E. Jr;Gandra, J.R.;Vendramini, T.H.A.;Souza, H.N.;Renno, F.P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.30 no.1
    • /
    • pp.34-41
    • /
    • 2017
  • Objective: Two experiments were performed to evaluate the effects of coated slow-release urea on nutrient digestion, ruminal fermentation, nitrogen utilization, blood glucose and urea concentration (Exp 1), and average daily gain (ADG; Exp 2) of steers. Methods: Exp 1: Eight ruminally fistulated steers [$503{\pm}28.5kg$ body weight (BW)] were distributed into a d $4{\times}4$ Latin square design and assigned to treatments: control (CON), feed grade urea (U2), polymer-coated slow-release urea A (SRA2), and polymer-coated slow-release urea B (SRB2). Dietary urea sources were set at 20 g/kg DM. Exp 2: 84 steers ($350.5{\pm}26.5kg$ initial BW) were distributed to treatments: CON, FGU at 10 or 20 g/kg diet DM (U1 and U2, respectively), coated SRA2 at 10 or 20 g/kg diet DM (SRA1 and SRA2, respectively), and coated SRB at 10 or 20 g/kg diet DM (SRB1 and SRB2, respectively). Results: Exp 1: Urea treatments (U2+SRA2+SRB2) decreased (7.4%, p = 0.03) the DM intake and increased (11.4%, p<0.01) crude protein digestibility. Coated slow-release urea (SRA2+-SRB2) showed similar nutrient digestibility compwared to feed grade urea (FGU). However, steers fed SRB2 had higher (p = 0.02) DM digestibility compared to those fed SRA2. Urea sources did not affect ruminal fermentation when compared to CON. Although, coated slow-release urea showed lower (p = 0.01) concentration of $NH_3-N$ (-10.4%) and acetate to propionate ratio than U2. Coated slow-release urea showed lower (p = 0.02) urinary N and blood urea concentration compared to FGU. Exp 2: Urea sources decreased (p = 0.01) the ADG in relation to CON. Animals fed urea sources at 10 g/kg DM showed higher (12.33%, p = 0.01) ADG compared to those fed urea at 20 g/kg DM. Conclusion: Feeding urea decreased the nutrient intake without largely affected the nutrient digestibility. In addition, polymer-coated slow-release urea sources decreased ruminal ammonia concentration and increased ruminal propionate production. Urea at 20 g/kg DM, regardless of source, decreased ADG compared both to CON and diets with urea at 10 g/kg DM.

Effect of Urea Concentration on Preparation of Monodispersed Colloidal Particles of Yttrium Hydroxycarbonate by Homogeneous Precipitation (균일입도 초미분 $Y(OH)CO_3 \cdot $nH_2O$ 생성에 미치는 요소 농도의 영향)

  • Kwon, Young Shik;Kim, Dong Su
    • Journal of the Korean Chemical Society
    • /
    • v.42 no.2
    • /
    • pp.220-227
    • /
    • 1998
  • Homogeneous precipitation of $Y^{3+}$ with urea has been studied in order to investigate the effect of urea concentration on the preparation of monodispersed colloidal "Yttrium Hydroxycarbonate $(Y(OH)CO_3 \cdot nH_2O)$". As the initial concentration of urea increased, the mean size of colloidal precipitates decreased, and the rate of precipitation of $Y^{3+}$ increased. When the initial concentration of urea was higher than $4.0 \sim 7.0 M$, precipitates obtained were no more monodispersed colloidal particles, but coagulated big particles; and, although the initial concentration of urea increased over 4.0 M, the rate of precipitation did not increased. It is important to decide the proper initial concentration of urea, because excessive urea can cause the environmental problems such as water pollution.

  • PDF

Influence of Milk Yield, Parity, Stage of Lactation and Body Weight on Urea and Protein Concentration in Milk of Murrah Buffaloes

  • Roy, B.;Mehla, R.K.;Sirohi, S.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.16 no.9
    • /
    • pp.1285-1290
    • /
    • 2003
  • The present study was carried out to investigate the effect of test day milk yield, test day evening milk yield, parity, stage of lactation and body weight on milk urea and milk protein concentration. A total of 319 milk samples was collected from buffaloes over four month's period and subjected to urea and protein analysis. Milk urea concentration (mg/dl) was significantly (p<0.01) increased with increasing test day milk yield. The lowest value ($57.03{\pm}1.13$) was observed in the milk yield group ${\leq}4.5kg/day$ and the highest value ($64.15{\pm}1.13$) in the group 7.7-10.7 kg/day. However, test day evening milk yield had no significant effect on milk urea concentration. Milk protein did not vary significantly with the test day milk yield as well as test day evening milk yield. A clear decreasing trend of milk urea concentration (mg/dl) was found with the increasing parity. The highest MU concentration ($64.03{\pm}1.14$) was found in the first parity and the lowest ($55.67{\pm}1.22$) was found in the sixth and above parity. Whereas, stage of lactation had no effect on milk urea concentration. Moreover, parity and stage of lactation did not have any significant effect on milk protein concentration. Body weight (kg) was also found negatively (p<0.05) related with urea content (mg/dl) in milk. The highest mean MU concentration ($64.34{\pm}0.88$) was found when body weight was between 532 and 598 kg and lower mean values ($59.24{\pm}0.94$ and $59.33{\pm}1.23$) were observed in 599 to 665 kg and ${\geq}666kg$ group. Body weight also had significant (p<0.05) effect on milk protein content. The highest milk protein content (%) was found in ${\geq}666kg$ group and the lowest in <531 kg group. In conclusion, for proper interpretation of milk urea values to monitor protein nutrition status of the buffaloes parity, milk yield and body weight should be considered.

Development of an Urea Sensor using Electric Conductivity Method (전기전도도법을 이용한 우레아 농도 센서 개발)

  • Choi, B.C.;Kim, K.Y.;Yang, J.Y.;Kim, H.N.
    • Journal of Power System Engineering
    • /
    • v.15 no.2
    • /
    • pp.55-60
    • /
    • 2011
  • The popularity of diesel engines is derived primarily from their higher thermal efficiency resulting from higher compression ratio. NOx removal from the diesel emissions is very important to meet stringent emission regulations. NOx emission from diesel engines is removed by an urea-SCR or an LNT system. The urea-SCR system needs the urea-solution supply system with concentration and level sensor. This study was carried out to develop a sensor for the measurement of urea-solution concentration by an electric conductivity method. Considering experimental parameters were the material of electrode, two kinds of electric power(AC or DC), the distance between two electrodes, and the length of electrode. It was found that the AC electric power was more useful to measure the urea-solution concentration compared to DC, because it prevented an ionization of the urea-solution. The silver rod coated with Pt is the most useful electrode, tendency of which is similar to Pt rod, and the cost is more economic. We could also find out the optimum distance between two electrodes and the length of electrode was 10mm and 3mm, respectively.