• Geomechanics and Engineering
• /
• v.9 no.6
• /
• pp.775-791
• /
• 2015

Due to the extension of communication ways (metro, highways, railways), hence, to improve traffic flow imposes often the difficult crossing that generally drive to the construction of underground works (tunnel, water conveyance tunnel...) plays a major role in the redevelopment of urban areas. This study is focused on the assessment of the interaction response of parallel tunnels, so this study uses the results from the simulation of two tunnels to illustrate a few observations that may aid in practical designs. In this article, simultaneous drilling of highway's twin tunnels is simulated by means of Finite Element Method (FEM) implemented in Plaxis program. So the treated subject appears in a setting of geotechnical where one can be to construct several tunnels sometimes in a ground of weak mechanical characteristics. The objective of this study is to simulate numerically the interaction effects caused by construction of two parallels tunnels. This is an important factor in the study of the total answer of the problem interaction between parallels underground works. The importance of the effects transmitted is function of several parameters as the type of the works, and the mechanical characteristics (tunnel size, depth, and the relative position between two tunnels, lining thickness...). This article describes numerical analyses of two parallels tunnels interaction. This study will be applied to a real case of a section tunnel T4 of the highway East-West (Algeria); the study presented below comprises a series of numerical simulations of two tunnels using the computer program Plaxis which is used in the analyses is based on Finite Element Method.

• Korea Journal of Hospital Management
• /
• v.23 no.4
• /
• pp.53-64
• /
• 2018

Purposes: The hospitals needs to generate a minimum profit, in order to perform its own role such as providing high-quality medical services. The demand for hospital management is increasing, as the social demands are diversified and the financial transparency is emphasized. The purpose of this study is to compare hospitals management based on Dupont Identity, by various hospital classification. Methodology: This study is based on '2016 Statistics for Hospital Management' provided by the Korea Health Industry Development Institute. The hospitals were classified according to the scope of care, the type of establishment, the location, and the number of beds. We analyzed the general and financial characteristics of over 337 hospitals using the method of Dupont Identity. Findings: Net profit margin (PM) has the biggest impact on return of equity (ROE). By the number of beds, general hospital with 160-299 beds have the highest return on equity (ROE). By location, hospitals in local municipalities have higher return on equity than hospitals in urban municipalities. According to the type of establishment, public hospitals have lower business performance, and although they invest more than private hospitals. Practical Implications: This study can inspire interest and provide understanding in hospital management and financial structure, by analyzing through an intuitive indicator named Dupont identity. It is possible to provide basic data for hospital management methods for each financial elements, in order to increase the profitability of hospitals.

• Computers and Concrete
• /
• v.23 no.1
• /
• pp.61-68
• /
• 2019

This paper presents a computational rational model to predict the ultimate and optimized load capacity of reinforced concrete (RC) beams strengthened by a combination of longitudinal and transverse fiber reinforced polymer (FRP) composite plates/sheets (flexure and shear strengthening system). Several experimental and analytical studies on the confinement effect and failure mechanisms of fiber reinforced polymer (FRP) wrapped columns have been conducted over recent years. Although typical axial members are large-scale square/rectangular reinforced concrete (RC) columns in practice, the majority of such studies have concentrated on the behavior of small-scale circular concrete specimens. A high performance concrete, known as polymer concrete, made up of natural aggregates and an orthophthalic polyester binder, reinforced with non-metallic bars (glass reinforced polymer) has been studied. The material is described at micro and macro level, presenting the key physical and mechanical properties using different experimental techniques. Furthermore, a full description of non-metallic bars is presented to evaluate its structural expectancies, embedded in the polymer concrete matrix. In this paper, the mechanism of mechanical interaction of smooth and lugged FRP rods with concrete is presented. A general modeling and application of various elements are demonstrated. The contact parameters are defined and the procedures of calculation and evaluation of contact parameters are introduced. The method of calibration of the calculated parameters is presented. Finally, the numerical results are obtained for different bond parameters which show a good agreement with experimental results reported in literature.

• The Journal of Korean Medical History
• /
• v.31 no.2
• /
• pp.27-40
• /
• 2018

Sauna, or hanjeung (汗蒸) is a physical sweating method that uses external heat to forcibly raise body temperature to treat cold damage disorders (傷寒) in traditional Korean medicine. This study focuses on the fact that the sauna was recorded as a healing and bathing method on the Vinaya Pitaka (律藏), and investigates the records of folk sauna therapy of Joseon Dynasty from the perspective of Buddhist medicine which played a significant role in ancient medicine history in Korea. Although the word 'hanjeung (汗蒸)' first appeared in "The Veritable Records of King Sejong (世宗實錄)" in the Korean literature, this study aims to confirm the possibility that the tradition of Buddhist sauna bathing has already existed since the Three Kingdoms period in Korea, based on the fact that sauna bathing was recorded in the Vinaya Pitaka and that the ancient Buddhist bathing culture was introduced in ancient Japan. In addition, the succession of the Buddhist sauna tradition by Goryeo will be traced back through the records of 1920s urban saunas in Gaesung (개성) which was the old capital of Goryeo and had a strong tendency to adhere to traditional Goryeo customs. Finally, the study tries to identify the elements of the Buddhist sauna bathing on the records of folk sauna therapy in the Joseon Dynasty. As a result, this study examines how the Buddhist sauna bathing culture in ancient Korea, which was led by medical monks, spread in the general public and influenced the folk sauna therapy in the Joseon Dynasty.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.2
• /
• pp.85-102
• /
• 2021

Phytosociological characteristics on Quercus acutissima forests distribution in Daechong-dam basin survey has been carried out using Z.-M. School's methodology and numerical-classification analyses. A total of 43 phytosociological relevés were sampled. Syntaxa were described as Oplismenus undulatifolius-Quercus acutissima community(typicum subcommunity, Phryma leptostachya var. asiatica subcommunity, Ulmus davidiana var. japonica subcommunity), Quercus acutissima community and Quercus variabilis-Quercus acutissima community (typicum subcommunity, Castanea crenata subcommunity). The above three plant communities were classified with species composition reflecting local environmental characteristics of mountain topographies, inclination degrees, and rock exposure rates. Conclusively, those communities were recognized as secondary vegetation affected by high intensity and frequency of human impacts as they inhabited in southward hill lands and low lying grounds in mountains adjacent to human settlements and arable lands. Quercus acutissima community was classified as rural type syntax based on their inlandward distribution and species composition differences from urban forests. Afforest process and natural succession were discussed in relation with habitat environmental elements of Quercus acutissima forest in the survey area.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.77-87
• /
• 2021

Environment is an important factor in city life. Environmental elements are a subject that must be discussed in the smart city plan, but there is still a lack of information and data sharing in the urban environment, so improvements are needed. As part of the intelligent of Nanjing, this research has made in-depth investigation into the construction and service demand of environmental information, and has carried out the research on the design and construction of intelligent information platform that conforms to Nanjing intelligent city planning, improves environmental quality and provides environmental information service. The visualization of information is also studied. The result is an important module in the construction of intelligent city in Nanjing.

• Tunnel and Underground Space
• /
• v.31 no.4
• /
• pp.211-220
• /
• 2021

Tunnel collapse often occurs during deep underground tunneling (> 40 m depth) in South Korea. Natural cavities as well as water supply pipes, sewer pipes, electric power cables, artificial cavities created by subway construction are complexly distributed in the artificial ground in the shallow depths of the urban area. For deep tunnel excavation, it is necessary to understand the properties of the ground which is characterized by porous elements and various geological structures, and their influence on the stability of the ground. This study analyzed geological factors for risk assessment in deep excavation in South Korea based on domestic and overseas case study. As a result, a total of 7 categories and 38 factors were derived. Factors with high weights were fault and fault clay, differential stress, rock type, groundwater and mud inrush, uniaxial compressive strength, cross-sectional area of tunnel, overburden thickness, karst and valley terrain, fold, limestone alternation, fluctuation of groundwater table, tunnel depth, dyke, RQD, joint characteristics, anisotropy, rockburst and so forth.

• Journal of Creative Information Culture
• /
• v.6 no.3
• /
• pp.209-217
• /
• 2020

Recently, interest in data analysis has increased, and convergence research through data analysis has been actively conducted in various fields such as engineering, natural science, and social science. In the field of architecture, various studies using data analysis are being conducted, and in particular, efforts are being made to solve the problems in the field of architecture that have been quantitatively expanded through the urbanization process. In this study, data analysis on residential satisfaction of residents in residential environment improvement areas and similar neighborhoods through urban regeneration projects is performed. Through analysis using R for post-residential evaluation elements that are conducted after building construction and occupancy, important evaluation items that affect the satisfaction of the residential environment are identified by analyzing the association rules between each evaluation element and identifying the frequency of major requirements of residents. To grasp. Through this, we intend to conduct convergence research between IT and architecture fields, such as the development of a system that can recommend high-quality residential areas as well as providing data for securing high-quality residential spaces when constructing residential areas in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.111-118
• /
• 2022

An electro-mechanical actuator (EMA) is an actuator that combines an electric motor with a mechanical power transmission elements, and it is suitable for urban air mobility (UAM) in terms of design freedom and maintenance. In this paper, the author presents the research results of the EMA that controls the rotor blade pitch angle of UAM. The actuator is based on an inverted roller screw and controls the blade pitch angle through a two-bar linkage. The dynamic equations for the actuator alone and the blade pitching motion with actuator were derived. For the latter, the equivalent moment of inertia is variable depending on the link angle due to the two-bar linkage. The variations of the equivalent moments of inertia are analyzed and compared in terms of the nut motion and the blade pitch motion. For an example model, the variation of the equivalent moment of inertia of the former is smaller than the latter, so it is judged that the dynamic equations derived from the point of view of the nut motion is suitable for the controller design.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.309-315
• /
• 2021

The purpose of the article is to analyze the functioning of economic systems in the context of the development of their potential in a circular economy. It is determined that the functioning of economic systems to ensure their sustainability should meet modern challenges and provide for the formation of competitive institutional architecture, the introduction of structural and regulatory innovations, the transition to an innovative model of development. The specific principles of functioning of economic systems include openness, nonlinearity, multivectority, dynamism, emergence, uncertainty about the development of economic processes. It is substantiated that the linear nature of development and equilibrium are not dominant in the functioning of economic systems, and increasing the level of economic efficiency should go hand in hand with minimizing the activities of enterprises, which necessitates the use of circular economy. The main prerequisites for the transition to a circular economy are analyzed. It is determined that the basic concept of the circular economy involves the development of a system of production and consumption, which is based on processing, reuse, repair, product sharing, change of consumption patterns and new business models and systems. The main elements of the circular economy include: a closed cycle, the use of renewable energy sources, systems thinking. The correlation of the principles of sustainable development and the peculiarities of the application of the circular economy is analyzed. It is determined that the circular economy contrasts with the traditional linear economic model, which is based on the model of "take-do-consume-throw away". The advantages and disadvantages due to the use of the principles of circular economy are given. Based on the study, steps are identified to accelerate the transition from a linear economy to a circular economy.