• Journal of the Economic Geographical Society of Korea
• /
• v.5 no.2
• /
• pp.229-248
• /
• 2002

In the recent years the office sector or industry are recognized not only as a key economic activity and employment source in urban areas, but also as a factor for the changing urban spatial structure. This paper aims to review the research trends and future prospects on the office locations. The study starts with a survey of literatures by summarizing the most important previous studies on the office location research and by disclosing research deficits. And then general locational trends of office activities on the base on the different geographical scale and its current location dynamics including the influencing factors are discussed. Finally this study summarizes the outlooks on the future task within office location research.

• Journal of Environmental Science International
• /
• v.20 no.7
• /
• pp.839-843
• /
• 2011

We have established a wind map of Singapore, a city-state characterized its land cover by urban buildings to confirm a possibility of wind farm development. As a simple but useful approximation of urban canopy, a zero-plane displacement concept was employed. The territory is divided into 15 sectors having similar urban building layouts, and zero-plane displacement, equivalent roughness height at each sector was calculated to setup a terrain boundary condition. Annual mean wind speed and mean wind power density map were drawn by a CFD micrositing model, WindSim where Changi International Airport wind data was used as an in-situ measurement. Unfortunately, predicted wind power density does not exceed 80 $W/m^2$ at 50 m above ground level which would not sufficient for wind power generation. However, the established Singapore wind map is expected to be applied for wind environment assessment and urban planning purpose.

• Journal of the Korean earth science society
• /
• v.38 no.7
• /
• pp.522-534
• /
• 2017

The purpose of this study is to verify urban flow and thermal environment by using the simulated Computational Fluid Dynamics (CFD) model in the area of Gangnam Seonjeongneung, and then to compare the CFD model simulation results with that of Seonjeongneung-monitoring networks observation data. The CFD model is developed through the collaborative research project between National Institute of Meteorological Sciences and Seoul National University (CFD_NIMR_SNU). The CFD_NIMR_SNU model is simulated using Korea Meteorological Administration (KMA) Local Data Assimilation Prediction System (LDAPS) wind and potential temperature as initial and boundary conditions from August 4-6, 2015, and that is improved to consider vegetation effect and surface temperature. It is noticed that the Root Mean Square Error (RMSE) of wind speed decreases from 1.06 to $0.62m\;s^{-1}$ by vegetation effect over the Seonjeongneung area. Although the wind speed is overestimated, RMSE of wind speed decreased in the CFD_NIMR_SNU than LDAPS. The temperature forecast tends to underestimate in the LDAPS, while it is improved by CFD_NIMR_SNU. This study shows that the CFD model can provide detailed and accurate thermal and urban area flow information over the complex urban region. It will contribute to analyze urban environment and planning.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.386-392
• /
• 2024

This paper constructs a precise dynamics model using flightlab, a specialized program for rotor modeling and performance analysis, to simulate urban air mobility (UAM). flightlab is well-suited for detailed modeling of UAM, particularly requiring detailed aerodynamic characteristics under high-altitude and urban wind conditions. The study focuses on implementing and analyzing a lift-cruise UAM model with distributed propulsion using flightlab. The lift-cruise model integrates motors for vertical take-off and fixed-wing flight. Given the limited specific examples of such UAM models in flightlab and challenges in evaluating with conventional fixed-wing or drone models, this research implements and verifies the lift-cruise model using matlab, comparing its performance against flightlab results to validate the modeling approach. This research aims to explore the potential of flightlab for detailed UAM modeling and contribute to technological advancements in future urban transportation.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.792-797
• /
• 2006

In general, the Maglev vehicle is ran over the elevated guideway consisted of steel or concrete structure. Since the running behaviour of the vehicle is affected by the flexibility of the guideway, the consideration of the flexibility of guideway is needed for evaluation of dynamics of both the vehicle and guideway. A new technique based on flexible multibody dynamics is proposed to model the Maglev vehicle, levitation controller, and guideway into a coupled model. To verify the technique, an urban Maglev vehicle is analyzed using the technique and discussions are carried out.

• Proceedings of the Korean System Dynamics Society
• /
• 2006.04a
• /
• pp.123-149
• /
• 2006

본 연구는 방사성폐기물 처분시설(radioactive waste repository)의 입지를 가정하여, 처분시설이 경상북도 경주시에 발생시키는 경제적, 사회적 효과를 분석하는데 목적이 있다. 정부는 처분장 유치의 유인책(incentives)으로서 경주 지역주민들을 위하여 다양한 정책적 수단을 마련하였다. 처분시설 입지에 따른 특별지원금 3,000 억원 지원, 수거물 반입 수수료 지원(년당 50-100억원), 한국수력원자력(주) 본사이전, 양성자가속기 사업 추진 등이 그것이다. 이들 지원사업들이 가져오는 변화를 시스템 다이내믹스(System Dynamics) 기법을 적용하여 지역사회의 인구, 산업, 토지, SOC, 지방재정 등이 어떻게 변화하는지 추적해 봄으로써 도시체제의 동태성(urban system dynamics)을 이해하고 처분장 시설이 지역에 입지했을때, 미래에 발생 가능한 문제점이 없는지 밝혀내고자한다. 이를 위하여 시뮬레이션 모델링에 입지 지역의 특성과 현황을 반영하여 처분장입지에 따른 지역의 동태적인 변화과정과 경향을 추정해 보고, 현재 예정되어 있는 지원사업이 충분한지, 이외에 다른 정책적 지원이 필요한지를 알아본다. 본 연구의 의미는 이처럼 경주지역 주민들이 처분장의 지역입지를 만족스럽게 행각하고 소외감 없이 생활을 영위할 수 있도록 정책적 지원 프로그램을 작성하는데 기초가 되는 연구라는 점에 있다고 하겠다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.187-193
• /
• 2002

Since the bus is regarded as the one of the most public transportation systems, research on the safety and facilities of the bus has been increased actively in recent years. In this paper, we concern the design of the bus door mechanism that is composed of many linkages and actuators(or motors). In particular, the folding door mechanism is representative system installed in most of urban buses. To design the folding door mechanism, we construct the kinematic and dynamic analysis model fur computer simulation. Also, the dynamic analysis is accomplished by both direct dynamics and inverse dynamics. Since the folding door mechanism has many design variables, the analysis program is developed to perceive kinematic and dynamic characteristics according to the design variables and simulation conditions.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.414-416
• /
• 2003

Pedestrian assemblage is now a normal phenomenon in modern cities. To maintain an unblocked traffic situation, protect the pedestrians' safety and make preparedness for any emergencies is an important task for police department. Modeling pedestrian dynamics and simulating evacuation process can provide useful information for make accurate decisions. In this paper, by virtue of geographic information technologies, the authors proposed a conceptual framework to simulate pedestrian dynamics and evacuation in an open urban environment.

• International Journal of High-Rise Buildings
• /
• v.12 no.4
• /
• pp.287-297
• /
• 2023

This paper briefly discusses current issues in wind engineering, including the enhancement of aerodynamic database and AI-assisted design, aerodynamic characteristics of tall buildings with atypical building shapes, application of computation fluid dynamics to wind engineering, evaluation of aerodynamic force coefficients based on a probabilistic method, estimation of tornadic wind speed (JEF scale) and effect of the Ekman Spiral on tall buildings.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.1315-1316
• /
• 2005