• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.15-23
• /
• 2020

Spline is a machine component using transmits rotating energy with grooves on internal of boss and external periphery of shaft. Internal spline is generally produced by machining process. However, to reduce manufacturing cost and save time, plastic deformation process such as backward extrusion is gradually adapted for spline production. In plastic deformation process, forming load, stress on tools and flow flaws should be taken into account to have sound products. For this purpose, kinematically admissible velocity fields for Upper Bound Method in backward extrusion of internal spline has been suggested, then forming load and relative pressure have been calculated. Internal spline forming experiments have been con-ucted under hydraulic press and the calculated forming load well predicts the load of experiment.

• Anatomy and Cell Biology
• /
• v.57 no.2
• /
• pp.194-203
• /
• 2024

The anatomical variations of coracobrachialis muscle (CBM) are of great clinical importance. This study aimed to elucidate the morphological variations, innervation patterns and musculocutaneous nerve (MCN) relation to CBM. Upper limbs of fifty cadavers (30 males and 20 females) were examined for proximal and distal attachments, innervation pattern of CBM and its relation to MCN. Four morphological types of CBM were identified according to number of its heads. The commonest type was the two-headed (63.0%) followed by the single belly (22.0%), three-headed (12.0%) and lastly four-headed (3.0%) type. Moreover, an abnormal insertion of CBM was observed in four left limbs (4.0%); one inserting into the medial humeral epicondyle, the second into the upper third of humeral shaft, the third one in the common tendon of biceps, and the fourth one showing a bifurcated insertion. Also, four different innervation patterns of CBM were identified including MCN (80.0%), lateral cord (14.0%), lateral root of median nerve (4.0%), and median nerve itself (2.0%). The course of MCN was superficial to the single belly CBM (19.0%) and in-between the heads in the other types (71.0%). Measurements of the length and original distance of CBM muscular branches originating from MCN revealed no sex or side significant difference. Awareness of the anatomic variations, innervation patterns, and MCN relation of CBM is imperative in recent diagnostic and surgical procedures to obtain definite diagnosis, effective management and good outcome.

• Journal of Advanced Marine Engineering and Technology
• /
• v.9 no.3
• /
• pp.214-224
• /
• 1985

In this paper, some theoretical equations are derived to calculate natural frequencies and their modes of a portal type derrick system and developed a computer program to carry out their calculations. The ship's structures, such as funnels, upper decks, engine structures, shaft systems suffer local vibrations of the ship. The exciting forces of vibrations are induced by the bearing force and the surface force of propeller or by the main engine. For solving the vibration problem of riggings like the derrick system the natural frequency of its system must be exactly estimated as far as possible and its resonance condition must be kept out of the normal engine operating speed range. When some severe resonances are encountered after the ship's launching, it may be required a tremendous cost to amend their condition. An experimental model of the portal type derrick is made, which is composed of two posts and a truss. This experimental model is excited by an electrical-magnet, and its vibration responses are found out. The calculating results of the model by the developed computer program are compared with those of measured values of model experiment, and they show fairly good agreements.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.403-406
• /
• 2006

Internal spline forming using a thin and long tube can cause the buckling and folding during the forming process. In the study, we proposed two different extrusion processes, and we performed the analysis in order to obtain the optimal process according to the length of land part. Using the rigid-plastic finite element simulation, the proposed processes have been compared by checking the deformed shape and stroke-road relation.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1452-1459
• /
• 2010

Application of long-span bridge, which is affected by parameters such as span length, shoe boundary condition, track property and stiffness of superstructure and substructure etc., can vary. Especially, by CWR aspects of the axial force, that can be less constraints of construction depending on whether the application of rail expansion joint(REJ), which has disadvantaged in terms of maintenance. In this study, it was performed parameter study for multiple variables (shaft length, the upper and lower cross-section characteristics, track characteristics, etc.) in terms of CWR aspects. Structure-rail interaction analysis was applied to the typical simple span PSC Box and 3 span continuous bridge Extradosed Bridge(50m+80m+50m) excluding REJ. If you set the boundary e of variables for long-span railway bridge excluding REJ through the this study, when designing future is expected to be able to useful.

• Journal of Biosystems Engineering
• /
• v.13 no.2
• /
• pp.9-17
• /
• 1988

This study was carried out to develop an agricultural robot for fruit harvesting. As the first step an experimental manipulator and its control system were constructed. The articulated manipulator driven by DC motors has 3 degrees-of-freedom. The manipulator has a gripper adequate for fruit harvesting and an upper arm which forms a kind of guiding channel so thai harvested fruit can pass through. Point-to-point control of joints are accomplished by a digital control system with a PID controller which consists of optical shaft encoders, power amplifiers using PWM, a microcomputer and a software. The microcomputer also computes the positions of manipulator and sequence of motions. The motion of the manipulator was to slow and rough that it would need further improvement.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.629-640
• /
• 2008

South anchorage(AN1, Myodo side) of supension bridge between Myodo and Gwangyang is designed as rock anchorage with 36m anchor length using the resistance of rock mass in Myodo. Checking the overall stability of the anchorage, we considered rock joints, bedding planes, fault zones and condition of rock structure in situ by analysis results for photo-lineaments, aerial photograph interpretation and drill-hole logs are considered. This anchorage consists of an access shaft, adit, and the upper and lower concrete bearing plate to introduce pre-stressing force into rock mass.

• Conservation Science in Museum
• /
• v.4
• /
• pp.17-21
• /
• 2003

We performed conservation treatment for the sarira reliquary from the pagoda of Hwangnyongsa temple site. The sarira reliquary is in the shape of gilt-bronze octagonal miniature pagoda. Through radiography, it was newly proved that a radial design exists on the roof part. The gilded layer was plated with amalgam. Each part was plated first before being put together. We restored the lost parts and made supports, and then assembled it in the following order: base, upper part of the base, shaft and roof part.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.203-204
• /
• 2017

In case of developing a guide-rail type window cleaning robot, only the first prototype has been developed. In this study, it was considered that the size and the load of the window cleaning robot was not optimized, and through the structural analysis of the self-weight of the window cleaning robot, the stress concentration area was derived and the concentrated stress was quantified. Analysis showed that the upper rail shaft had a bending stress of 9.964Mpa and the bolt had a shear stress of 19.544Mpa. The results of this study will be used as basic data for designing future prototypes.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.1
• /
• pp.45-51
• /
• 1995

The incidence of metastatic bony lesion has been increased recently, with the advanced therapeutic modalities of malignant tumors. The purpose of this study was to evaluate the effectiveness of surgical treatment in impending or established pathologic fractures due to metastasis in extremity. From 1981 to 1992, thirty two patients who had established or impending pathologic fractures in extremity had been treated surgically. The locations of metastasis, were lower extremity in 24 cases(femsral head and neck;5, intertrochanteric;7, subtrochanteric;8, femoral shaft;4) and upper extremity in 8 cases(proximal humerus;2, humoral shaft;6). The method of surgery was excision of tumor mass and rigid internal fixation to allow immediate mobilization, except 2 cases of amputation. The results were analysed by two criteria. The first was the grade of performance status that was made by modification of Functional Classification of New York Heart Association. The second was the degree of pain relief. The performance status was improved at least one grade in all patients and the mean improvement was 1.7 grades. The satisfactory pain relief was achieved in 81% of patients. Postoperatively, most of the patients had only slight to moderate limitation of physical activities and they became comfortable at rest and ordinary activities. The solitary metastatic lesions showed better pain relief(92%) than multiple metastasis(75%). The curative surgery was done in 3 cases, and they showed more than 24 months of disease-free survival.