• Korean Journal of Environment and Ecology
• /
• v.38 no.3
• /
• pp.246-262
• /
• 2024

The survey conducted from 2018 to 2020 aimed to investigate the changes in fish fauna and community characteristics in the upper reaches of the Seomgang River, Korea. During the survey period, 35 sites were selected, resulting in the collection of 7,817 fish belonging to 12 families and 40 species. The dominant species was Zacco koreanus, with a relative abundance of 34.5%, followed by Z. platypus at 28.7%. Other significant species included Rhynchocypris oxycephalus (10.2%), Pungtungia herzi (5.3%), and Squalidus gracilis majimae (4.3%). Notably, four protected species - Acheilognathus signifer, Gobiobotia brevibarba, and Cottus koreanus, designated as class II endangered wildlife by the Ministry of Environment- were identified. These species predominantly inhabit the middle and lower reaches, except for Gobiobotia brevibarba, which is found in the upper reaches. Nineteen species, accounting for a 47.5% endemism rate, were endemic to Korea. The study also noted the presence of one climate-sensitive species, Cottus koreanus, and two exotic species, Carassius cuvieri and Micropterus salmoides. Community analysis indicated a trend of decreasing dominance and increasing diversity and richness from upstream to downstream, with a distinct division into uppermost reaches, upper reaches, middle and lower reaches, and lakes. The construction of the Hwaseong Dam has had a significant direct and indirect impact on the fish community. The habitat and abundance of endangered species such as R. pseudosericeus, A. signifer, and G. brevibarba decreased dramatically immediately after the dam's construction, transforming the submerged area from lotic to lentic environments. Approximately 20 years later, the habitats have stabilized, leading to an increase in the fish population and a recovery of the previously diminished endangered species. The river health (FAI) was also evaluated, with 27 sites rated as very good (A), seven as good (B), and one as fair (C). However, endangered species such as A. signifer continue to face threats from dam and river construction, while C. Koreanus has experienced a severe population decline due to river works. Additionally, the presence of the ecosystem-disrupting species M. salmoides in Hwaseong Lake raises concerns. To ensure a stable habitat for fish in the upper reaches of the Seomgang River, it is crucial to avoid indiscriminate river construction, urgently implement restoration policies for endangered species such as A. signifer, and develop management strategies to control the spread of invasive species such as bass.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.205-218
• /
• 1996

A given facial type can be considered as a syndrome in which various features are aggregated, so a single parameter is not sufficient to accurately identify a given facial type. This study was designed to identify & characterize the skeletal types that blend under the headline-'Cl III,deepbite'. Cephalograms of thirty-four untreated mixed dentition patients, selected mainly on the basis of clinical impression of Cl III with reduced lower face heights were studied. The following conclusion can be drawn. 1. Cl III malocclusion with reduced lower face height could be classified into three types. 2. Subtype 1 was identified by the following features : strong ramus, more anteriorly positioned upper molars without alveolar hypoplasia, acutely reduced Mn. plane angle. 3. Subtype 2 was characterized by a short ramus, sharply reduced postrior alveolar height, and normal Mn. plane angle. In general, this type had hypoplasia tendency in the vertical dimension. 4. In subtype 3, the AUFH occupying more percentage than ALFH was a outstanding feature. Ramal height was in normal range, alveolar hypoplasia and slightly reduced Mn. plane angle was observed. 5. The features of the subtypes were reflected in certain indices, which can be regarded as discriminative index. LAFH: if reduced, regardless of subtypes, indicates reduced lower ant. face height consistently. FHR: when this ratio is increased, it indicates subtype 1. FHI: when this ratio is in normal range, it indicates subtype 2. FPI: if reduced greatly, it indicates subtype 3.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.187-197
• /
• 2001

The change of the vertical dimension is of fundamental importance to the orthodontist. However, the choice between the two methods of treatment, extraction versus nonextraction, is not clear. It is not verified that the extraction method decreases vertical dimension, or nonextraction methods result in an increase in vertical dimension. The purpose of this study was to evaluate the changes of vertical dimension of face after the orthodontic treatment with standard edgewise technique, and to compare them in relation to facial types and bicuspid extraction. The subjects consisted of 165 orthodontic patients (77 of adolescents, 88 of adults), and was divided into vertical nonextraction (VN) group, vertical extraction (VE) group, horizontal nonextraction (HN) group, horizontal extraction (HE) group. Pre-and Post-treatment cephalograms were taken with standard method, traced, and digitized for each subject. The comparison of the measurements were statistically executed with Student's t-test. The results were as follows : 1. The facial height and molar height were increased after orthodontic treatment in the all groups. 2. No significant difference was found in the facial height change between the vertical and horizontal groups. 3. No significant difference was found in the facial height change between the extraction and nonextraction groups. 4. As the upper molars were extruded in adolescents group and lower molars were extruded in adults group, lower anterior facial height (LAFH) was increased. 5. None of the pretreatment variables correlates to the change of lower anterior facial height (LAFH).

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.5-14
• /
• 2007

The purpose of this study is to investigate the effects of personal characteristics and body cathexis of middle-aged women on their clothing image preferences. Data was collected using questionnaire from 35 to 59 of age living in Daegu. The questions for personal characteristics included ascendancy, responsibility, emotional stability, sociability and self-confidence. Clothing images included the noble, bold, practical and female. Data were analyzed using SAS, SPSS programs for frequency, percentage, average, correlation, ANOVA, Duncan's multiple range test. The results of this study are as follows: 1. The body cathexis of middle-aged women to their own body is not so high and the satisfaction with their body parts were face features, upper limb, lower limb, torso, height, physique, weight orderly. 2. The more satisfied with their body the higher emotional stability and self-confidence. 3. The more satisfied with the face the more preferred noble, bold, female image in doffing. The more satisfied with the torso and physique the more preferred bold, female image in clothing. 4. Middle-aged women with a high ascendancy preferred bold image and, those with a high responsibility preferred a practical image. Those with a high emotional stability preferred noble, practical image. Middle-aged women having a high sociability preferred noble, male image and having a high self-confidence preferred bole, male image.

• The Journal of Korean Academy of Prosthodontics
• /
• v.17 no.1
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.121-134
• /
• 2004

This article describes a clinical protocol for the conventional rehabilitation of patient diagnosed with partial anodontia. A combined dental therapy approach was used and included endodontic therapy and root capping on the maxillary central incisors, fabrication of a maxillary overdenture, and fabrication of mandibular konus overdenture supported by 3 konus abutments. Within this protocol, tooth-supported overdenture prostheses are used for 2 purposes: first, to obtain the most rigid retention and function at an established maxillary-mandibular relationship; and second, to continuously maintain function and esthetic appearance applying immediate dentures after teeth extraction. The idea behind this protocol and its associated clinical procedures is presented along with a discussion compared with implant therapy. In the case introduced, and after 7 years of observation, the therapy can be seen as a success. We increased the occlusal vertical height in this case, but it would be more appropriate to see this as recovering the occlusal vertical height that was lost. The process of increasing the occlusal vertical height, that is restoration of the face, modification of the extrinsic occlusion of the incisors, and retraction of the mandible is very difficult and important. Ultimately, class III malocclusion is fixed, adequate occlusal vertical height is gained, and the retracted posterior anodontial portion is restored by prosthodontic dentures based on the rigid support theory. The result of the therapy done on the later-achieved malocclusion with partial anodontia on the posterior portion must consider the following in order to maintain the safety of the esthetics of the tooth and face for a period of time: 1) occlusal restoration with an ideal occlusal vertical height, 2) allowance of the final occlusion induced by the functional relationship of the upper and lower jaw, 3)final occlusion functionally induced by the lip competence limit.

• The Journal of Korean society of community based occupational therapy
• /
• v.4 no.1
• /
• pp.23-31
• /
• 2014

Objective : The objectives of this study were to compare the variables from Fitmeter accelerometer with them from CMS-70P(Zebris Medizintechnik Gmbh, Germany) and to suggest the availability the accelerometer in the field of occupational therapy. Methods : Twenty participants performed calling, drinking water, washing face and spooning and we measured Sum of Single Vector Magnitude(SSVM) and range of motion(ROM) on the wrist and elbow joints. Results :With respect to the wrist and elbow joints, SSVM and ROM differed significantly according to the task(calling, drinking water, washing face and spooning)(p<.001; p<.001; p<.001; p<.001). As for the wrist joint, SSVM and ROM did not show the significant correlation(p>.05) but as for the elbow joint, SSVM and ROM did show the significant correlation according to the task(p<.01; p<.001; p<.01; p<.05). With regard to the SVM-difference of wrist and elbow joints, calling and washing showed the significant difference (p<.001; p<.05) but drinking and spooning did not show the significant difference(p>.05; p>.05). Conclusion : We suggest that Fitmeter accelerometer would be use to record the kinematic variables during performance of ADL and it can compensate the function of CMS-70P as for the elbow joint than the wrist joint.

• Korean Journal of Biological Psychiatry
• /
• v.11 no.2
• /
• pp.117-126
• /
• 2004

Objects:It has been reported that the incidence of tardive dyskinesia(TD), the remarkable abnormal involuntary movement, was higher in the schizophrenics with high blood sugar levels and that TD had been improved by small amount of insulin-injection for 90 days. And also it was generally known that the blood lipids were higher in the schizophrenics with tardive dyskinesia. Thus, we tried to replicate the correlations of abnormal involuntary movements with blood sugar levels and blood lipids in chronic schizophrenics treated with antipsychotics. Methods:Thirty-eight male schizophrenic inpatients who were stable in clinical state with medications, were included. The patients who had been already diagnosed as diabetes mellitus(DM), organic brain disorder, substance- related disorder, physical illness were excluded and also we excluded female patients to remove the hormonal effect on TD. Eleven patients who ranked higher(above five) in the Abnormal Involuntary Movement Scale(AIMS) were assigned into 2 groups, a dibenese group and a placebo group. Diabinese or placebos were administrated for 3 weeks with antipsychotics and AIMS was rechecked. Results:There were no correlations between the total AIMS scores and blood sugar and lipids levels in all subjects. The means of total and subscale scores(objective, face, and extremity) of AIMS did not reveal statistical significances between diabinese and placebo groups. However(total, jaw, face, upper arm, and objective feeling), were statistically higher in the diabinese group than those in the placebo group. And correlations of total cholesterol(TC) with fast blood sugar(FBS), weight with body mass index(BMI) and waist, total glycerol (TG) with BMI were statistically significant. Conclusion:In this study, there were statistical significances in the changes in ratings of AIMS scores between the diabinese group and the placebo group. Application of oral hypoglycemic agent might be a way of improving abnormal involuntary movements in schizophrenics with abnormal involuntary movements or TD. Althogugh it was not certain that there were correlations of abnormal involuntary movement with blood sugar and lipids, correlations of TC/TG with AIMS, of FBS with AIMS cautiously suggest that the regular check of $HbA_1C$, waist, and weight are recommended for schizophrenics.

• Korean Journal of Community Nutrition
• /
• v.16 no.6
• /
• pp.740-750
• /
• 2011

With a recent increase in dietary supplements (DS) consumption among children in Korea, this study was performed to examine the influencing factors on children's DS consumption. A nationwide survey was conducted employing 3 representative samples of children for summer & fall of 2008 and spring of 2009 by stratified multistage sampling of 120 survey sites per season based on the 2005 census population. Approximately 30 households from each survey site were screened for residing children of 0-19 years and about 1,700 households remained as eligible samples per season. Trained dietitians visited households to perform face-to-face interview to children and/or parents regarding DS consumption including health functional foods (HFF), vitamins/minerals (V/M) supplements and other food supplements during 1 month prior to interview. Out of 5,328 children responded, 18.7% reported DS consumption. Consumption rate was higher in boys (19.9% vs. 17.3% in girls, P < 0.05) and youngsters (22.8% compared to 15.0% in adolescents, P < 0.001). Children from higher income family (P < 0.001), those living in apartments (P < 0.001), those residing in metropolitan area (P < 0.001), and those of mothers with higher education (P < 0.001) were more likely to take DS. Also, mother's employment status and occupation were significantly associated with children's DS consumption. The most popular DS was HFF (72.1%), which was consumed more in children of higher income family. It is revealed that socioeconomic factors affect children's DS consumption significantly. Also it is necessary to estimate children's V/M intake from DS and foods together especially because there are tolerable upper limits set for V/M for safety purposes.

• Journal of the Korean Child Neurology Society
• /
• v.26 no.4
• /
• pp.288-291
• /
• 2018

Hemiplegic migraine (HM) is a rare subtype of migraine with aura and is accompanied by a fully reversible motor aura. HM can occur in two forms: familial or sporadic. Currently, three genes are related to familial HM. Typically, HM occurs in the first or second decade of life and involves gradually progressing aura symptoms in succession, accompanied by headaches. The aura includes visual, sensory, motor, aphasic and often basilar-type symptoms. Motor aura (weakness) is related to the regions where the sensory aura is involved, and it usually starts at the hand before spreading to the arm and face. Aphasia is a common form of speech aura, but does not typically present as a difficulty in understanding. In this case report, the sensory-motor aura started at the right face and then gradually progressed to the right leg without any symptoms in the ipsilateral upper extremity. To the best of my knowledge, there has been no previous case report for the presentation of a hemiplegic migraine, as in this case report. As there is a possibility of misdiagnosis of Bell's palsy at the early stage of this case, this case report suggests that a physician should consider the rare possibility of stroke or HM when a patient presents with unilateral facial palsy.