• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.463-467
• /
• 2004

A FTS (Flight Termination System) is a system that resides in a flying object such as a rocket, unmanned airplane, helicopter, missile, etc., receives commands from ground stations or detects coordinates automatically, and accomplishes a destruction command in case the object does not follow the presumed orbit. In this paper, we address the implementation of a communication modem for the FTS modem. We present general theory, simulation results using Matlab, and several results on the implementation using VHDL.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1000-1007
• /
• 2007

In this study, structural vibration analyses of a smart unmanned aerial vehicle (UAV) have been conducted considering dynamic hub-loads of tilt rotor. Practical computational structural dynamics technique based on the finite element method is applied using MSC/NASTRAN. The present UAV(TR-S5-04) finite element model is constructed as a full three-dimensional configuration with different fuel conditions and tilting angles for helicopter, transient and airplane flight modes. In addition, the 3-dimensional supporting equipment structures of electronic devices are considered for vibration analysis. As the results of this study, transient structural displacements and accelerations are presented in detail. Moreover, vibration characteristics of structural parts and installed equipments are investigated for different fuel conditions and tilting angles.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.525-528
• /
• 2005

The tracking antenna system must be always pointed to target moving vehicle. Especially, for an antenna mounted on a movable vehicle, it needs the stabilized antenna system. In this paper, two types of fuzzy controller were derived and applied to a data link antenna system and the altitude control of unmanned helicopter, respectively. A simplified Fuzzy-PID controller was designed for 2-axes antenna stabilization and tracking system and the performance was verified by simulations and experiments. Computer simulations were performed by Matlab and SIMULINK. A 2-Axes antenna (SeaTel 1898 model) was selected as test platform of this research. The antenna was modified by using two Blushless Direct Current motors and an embedded DSP controller. To verify the performance of designed antenna servo control system, the performance of the conventional PID controller and that of the Fuzzy-PID controller, designed by the same PID control gains, were compared.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.653-655
• /
• 1999

카메라 영상을 통하여 무인 헬리콥터 동작을 추정하기 위해 적응형 가중치를 사용한 새로운 Ego-Motion을 검출 기법을 제안하였다. 무인 헬리콥터 동적 특성은 비선형이며, 심한 진동 발생으로 영상 번짐(blur) 현상이 나타나기 때문에 상관 값만을 고려한 정합 방법으로는 빈번히 오차가 발생한다. 본 논문에서는 가속도, 각 가속도 및 제어입력 값에 의한 위치 추정 값과 상관 값 및 에지 강도를 가중치에 의해 융합하여 정확한 Ego-Motion을 계산할 수 있는 기법을 제안하였다. 또한 무인 헬리콥터의 가속도, 각 가속도, 상하 속도에 따라서 영상의 번짐 정도가 달라 이들 같이 크면 위치오차에 가중을 크게 주고, 작으면 상관 값에 가중치를 적게 주는 적응형 가중치 결정 알고리즘을 적용하였다. 제안한 적응형 가중치 기법을 무인 헬리콥터에 실험한 결과 카메라에 포착된 영상에 의해 무인헬기의 동작을 정확히 추정 할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제13권2호
• /
• pp.101-107
• /
• 2007

A coaxial rotor flying robot is developed for surveying and reconnoitering various circumstances under calamity environment. The robot has two contrarotating rotors on a common axis, an embedded microcontroller, an IMU(Inertial Measurement Unit), an IR sensor for height control, a micro camera for surveillance, ultrasonic position sensors and wireless communication devices. A bell-bar mounted on the top of the upper rotor hub increases stability and improves flight performance. In this paper, we present a dynamic model of a coaxial rotor flying robot and design an embedded controller far the robot, and implement them to control the developed flying robot. Experimental results show that the proposed controller is valid for autonomous hovering and position control.

• 소음진동
• /
• 제5권2호
• /
• pp.215-224
• /
• 1995

In this paper, the three-dimensional finite element model is established to investigate the structural dynamic characteristics of rotor blade using a finite element analysis. Six natural frequencies and mode shapes are calculated by computer simulation. The first three flapping modal frequencies, the first two lead-lag modal frequencies, and the first feathering modal frequency are validated through comparison with the modal test results of the fixed rotor blade. The computer simulation results are found in good agreement with experimentally measured natural frequencies. The important results are obtained as follows: (1) Natural frequencies are changed due to the variation of rotational speed and fiber angle of rotor blade, (2) Weak coupling between flapping mode shape and lead-lag mode shape are detected, (3) Centrifugal force has more effect on flapping modal frequency than lead-lag modal frequency.

• 항공우주시스템공학회지
• /
• 제3권3호
• /
• pp.17-23
• /
• 2009

KARI SUAV (Smart Unmanned Aerial Vehicle) program is currently on the phase of ground and flight test. SUAV is a tilt rotor aircraft having the capability of vertical take-off/landing and high speed forward flight. The SUAV rotor system is 3-bladed, gimbaled hub type, which is not common for conventional helicopter configuration. In this paper, detailed procedure and method of rotor pitch rigging, tracking and balancing were described based on the experience of SUAV ground test.

• 한국항공우주학회지
• /
• 제48권12호
• /
• pp.997-1004
• /
• 2020

Synchropter는 서로 경사진 한 쌍의 회전날개가 동조 교차 회전하는 회전익 항공기의 일종으로 동축반전 헬리콥터와 마찬가지로 꼬리 회전날개를 제거할 수 있어서 효율적이며 간결한 형태의 비행체 구성이 가능하다. 드론 체계로서의 적합성을 검토하기 위하여 소형 Synchropter를 설계, 제작하여 비행시험을 수행하였다. 설계한 Synchropter는 로터 직경이 1.4m이며 중량이 7kg인 소형비행체로서 효율적으로 비행 특성을 확인하기 위하여 상용부품 기반으로 제작하였다. 비행 제어 시스템은 Open Architecture인 Pixhawk를 기반으로 구성하였으며, Sychropter 제어법칙을 PX4 펌웨어에 탑재할 수 있도록 개발하였다. 정성적 비행시험을 통해 Synchropter의 비행 특성을 분석하였으며, 분석 결과, 드론 체계로서의 활용 가능성을 파악할 수 있었다.

• 한국항공운항학회지
• /
• 제15권4호
• /
• pp.24-32
• /
• 2007

In this study, computational structural vibration analyses of a smart unmanned aerial vehicle (SUAV) with tilt-rotors due to dynamic hub loads have been conducted considering detailed supporting structures of installed equipments. Three-dimensional dynamic finite element model has been constructed for different fuel conditions and tilting angles corresponding to helicopter, transition and airplane flight modes. Practical computational procedure for modal transient response analysis is successfully established. Also, dynamic loads generated by rotating blades and wakes in the transient and forward flight conditions are calculated by unsteady computational fluid dynamics technique with sliding mesh concept. As the results of present study, transient structural displacements and accelerations of the vibration sensitive equipments are presented in detail. In addition, vibration characteristics of structures and installed equipments of which safe operation is normally limited by the vibration environment specifications are physically investigated for different flight conditions.

• 한국항공우주학회지
• /
• 제39권12호
• /
• pp.1160-1165
• /
• 2011

본 연구는 무인항공기 및 헬리콥터 등에 장착되어 운용되는 고정밀 관측 다축 구동 EO/IR 카메라의 진동해석에 관한 것이며, 카메라에 적용된 볼 베어링을 모델링 하는데 있어서 3축 스프링요소를 적용하는 방법을 제시하였고, 이것에 의한 유한요소모델의 진동 응답 결과를 얻었다. 볼 베어링을 3축 스프링 요소로 모델링한 진동해석결과는 시험결과와 비교 되었으며, 잘 일치함을 알 수 있었다. 또한, 랜덤진동 시간이력해석을 통하여 다축 구동 EO/IR 카메라의 진동 응답 특성을 해석하고 분석하였다. 이의 연구결과는 우주용 카메라들에 사용되는 볼 베어링의 유한요소모델링 기법에 응용될 수 있다.